Background: Comprehensive quality assurance (QA) for a seamless workflow of high-dose-rate brachytherapy, from imaging to planning and irradiation, is uncommon, and QA of the source dwell position is performed in one- or two-dimensions. Gel dosimetry using magnetic resonance imaging (MRI) is effective in verifying the three-dimensional distribution of doses for image-guided brachytherapy (IGBT). However, MRI scanners are not readily accessible, and MRI scanning is time-consuming.
View Article and Find Full Text PDFNihon Hoshasen Gijutsu Gakkai Zasshi
November 2024
Purpose: We evaluated the measurement accuracy and time efficiency of the tumor respiratory motion evaluation methods using a dynamic thorax motion phantom.
Methods: A total of 12 patterns of 4DCT images with different tumor displacements and artifacts were used for the measurement. Three methods were employed to measure tumor motion.
Background: Coincidence of the treatment and imaging isocenter coordinates is required to safely perform small-margin treatments, such as stereotactic radiosurgery of multiple brain metastases. A comprehensive and direct methodology for verifying concordance of kilovoltage cone-beam computed tomography (kV-CBCT) and treatment coordinates using an x-ray CT-based polymer gel dosimeter (dGEL) and onboard kV-CBCT was previously reported. Using this methodology, we tested the ability of a new commercially available x-ray CT-based polymer dGEL with a rapid response to provide efficient quality assurance (QA).
View Article and Find Full Text PDFExisting electronic cleansing (EC) methods for computed tomographic colonography (CTC) are generally based on image segmentation, which limits their accuracy to that of the underlying voxels. Because of the limitations of the available CTC datasets for training, traditional deep learning is of limited use in EC. The purpose of this study was to evaluate the technical feasibility of using a novel self-supervised adversarial learning scheme to perform EC with a limited training dataset with subvoxel accuracy.
View Article and Find Full Text PDFElectronic cleansing (EC) is used for computational removal of residual feces and fluid tagged with an orally administered contrast agent on CT colonographic images to improve the visibility of polyps during virtual endoscopic "fly-through" reading. A recent trend in CT colonography is to perform a low-dose CT scanning protocol with the patient having undergone reduced- or noncathartic bowel preparation. Although several EC schemes exist, they have been developed for use with cathartic bowel preparation and high-radiation-dose CT, and thus, at a low dose with noncathartic bowel preparation, they tend to generate cleansing artifacts that distract and mislead readers.
View Article and Find Full Text PDFInt J Comput Assist Radiol Surg
October 2017
Purpose: A temporal subtraction (TS) image is obtained by subtracting a previous image, which is warped to match the structures of the previous image and the related current image. The TS technique removes normal structures and enhances interval changes such as new lesions and substitutes in existing abnormalities from a medical image. However, many artifacts remaining on the TS image can be detected as false positives.
View Article and Find Full Text PDFAbdom Imaging (2014)
September 2014
In CT colonography, orally administered positive-contrast fecal-tagging agents are used for differentiating residual fluid and feces from true lesions. However, the presence of high-density tagging agent in the colon can introduce erroneous artifacts, such as local pseudo-enhancement and beam-hardening, on the reconstructed CT images, thereby complicating reliable detection of soft-tissue lesions. In dual-energy CT colonography, such image artifacts can be reduced by the calculation of virtual monochromatic CT images, which provide more accurate quantitative attenuation measurements than conventional single-energy CT colonography.
View Article and Find Full Text PDFIn CT colonography (CTC), orally administered positive-contrast fecal-tagging agents can cause artificial elevation of the observed radiodensity of adjacent soft tissue. Such pseudo-enhancement makes it challenging to differentiate polyps and folds reliably from tagged materials, and it is also present in dual-energy CTC (DE-CTC). We developed a method that corrects for pseudo-enhancement on DE-CTC images without distorting the dual-energy information contained in the data.
View Article and Find Full Text PDFProc SPIE Int Soc Opt Eng
February 2015
In recent years, dual-energy computed tomography (DECT) has been widely used in the clinical routine due to improved diagnostics capability from additional spectral information. One promising application for DECT is CT colonography (CTC) in combination with computer-aided diagnosis (CAD) for detection of lesions and polyps. While CAD has demonstrated in the past that it is able to detect small polyps, its performance is highly dependent on the quality of the input data.
View Article and Find Full Text PDFCT colonography (CTC) uses orally administered fecal-tagging agents to enhance retained fluid and feces that would otherwise obscure or imitate polyps on CTC images. To visualize the complete region of colon without residual materials, electronic cleansing (EC) can be used to perform virtual subtraction of the tagged materials from CTC images. However, current EC methods produce subtraction artifacts and they can fail to subtract unclearly tagged feces.
View Article and Find Full Text PDFComput Math Methods Med
December 2015
We applied and optimized the sparse representation (SR) approaches in the computer-aided diagnosis (CAD) to classify normal tissues and five kinds of diffuse lung disease (DLD) patterns: consolidation, ground-glass opacity, honeycombing, emphysema, and nodule. By using the K-SVD which is based on the singular value decomposition (SVD) and orthogonal matching pursuit (OMP), it can achieve a satisfied recognition rate, but too much time was spent in the experiment. To reduce the runtime of the method, the K-Means algorithm was substituted for the K-SVD, and the OMP was simplified by searching the desired atoms at one time (OMP1).
View Article and Find Full Text PDFObjective: The purpose is to develop and evaluate the ability of the computer-aided diagnosis (CAD) methods that apply texture analysis and pattern classification to differentiate malignant and benign bone and soft-tissue lesions on 18F-fluorodeoxy-glucose positron emission tomography/computed tomography ((18)F-FDG PET/CT) images.
Methods: Subjects were 103 patients with 59 malignant and 44 benign bone and soft tissue lesions larger than 25 mm in diameter. Variable texture parameters of standardized uptake values (SUV) and CT Hounsfield unit values were three-dimensionally calculated in lesional volumes-of-interest segmented on PET/CT images.
Annu Int Conf IEEE Eng Med Biol Soc
August 2015
Since it is difficult to choose which computer calculated features are effective to predict the malignancy of pulmonary nodules, in this study, we add a semantic-level of Artificial Neural Networks (ANNs) structure to improve intuition of features selection. The works of this study include two: 1) seeking the relationships between computer-calculated features and medical semantic concepts which could be understood by human; 2) providing an objective assessment method to predict the malignancy from semantic characteristics. We used 60 thoracic CT scans collected from the Lung Image Database Consortium (LIDC) database, in which the suspicious lesions had been delineated and annotated by 4 radiologists independently.
View Article and Find Full Text PDFAnnu Int Conf IEEE Eng Med Biol Soc
August 2015
This paper describes a computer-aided diagnosis (CAD) method to classify diffuse lung diseases (DLD) patterns on HRCT images. Due to the high variety and complexity of DLD patterns, the performance of conventional methods on recognizing DLD patterns featured by geometrical information is limited. In this paper, we introduced a sparse representation based method to classify normal tissues and five types of DLD patterns including consolidation, ground-glass opacity, honeycombing, emphysema and nodular.
View Article and Find Full Text PDFMinimum description length (MDL) based group-wise registration was a state-of-the-art method to determine the corresponding points of 3D shapes for the construction of statistical shape models (SSMs). However, it suffered from the problem that determined corresponding points did not uniformly spread on original shapes, since corresponding points were obtained by uniformly sampling the aligned shape on the parameterized space of unit sphere. We proposed a particle-system based method to obtain adaptive sampling positions on the unit sphere to resolve this problem.
View Article and Find Full Text PDFUltrasound (US)-mediated gene transfection in the presence of microbubbles is a recently developed and promising non-viral gene delivery method. Optimising the parameters used in ultrasonic transfection is urgently required in order to realise higher transfection efficiencies in clinical settings. This study examined the effect of ultrasound exposure parameters on plasmid DNA transfection in mouse embryonic fibroblast cell lines using perfluorobutane bubbles.
View Article and Find Full Text PDFMed Image Comput Comput Assist Interv
November 2011
Visual inspection of diffuse lung disease (DLD) patterns on high-resolution computed tomography (HRCT) is difficult because of their high complexity. We proposed a bag of words based method on the classification of these textural patters in order to improve the detection and diagnosis of DLD for radiologists. Six kinds of typical pulmonary patterns were considered in this work.
View Article and Find Full Text PDF