Effect of degeneration on the six degree of freedom mechanical properties of human lumbar spine segments.

While the effects of disc degeneration on compression and rotation motions have been studied, there is no data for shear loading. Clinical research has shown that those with low back pain (a potential consequence of degeneration) experience a 75% greater lateral shear force than those without it. Therefore, the aim was to compare the effect of degeneration on spine segment stiffness and phase angle in each of six degree of freedom (6DOF) loading directions.

Effect of potting technique on the measurement of six degree-of-freedom viscoelastic properties of human lumbar spine segments.

Polymethyl methacrylate (PMMA) and Wood's Metal are fixation media for biomechanical testing; however, the effect of each potting medium on the measured six degree-of-freedom (DOF) mechanical properties of human lumbar intervertebral discs is unknown. The first aim of this study was to compare the measured 6DOF elastic and viscoelastic properties of the disc when embedded in PMMA compared to repotting in Wood's Metal. The second aim was to compare the surface temperature of the disc when potted with PMMA and Wood's Metal.

A novel method to replicate the kinematics of the carpus using a six degree-of-freedom robot.

Understanding the kinematics of the carpus is essential to the understanding and treatment of wrist pathologies. However, many of the previous techniques presented are limited by non-functional motion or the interpolation of points from static images at different postures. We present a method that has the capability of replicating the kinematics of the wrist during activities of daily living using a unique mechanical testing system.

Assessment of the initial viscoelastic properties of a critical segmental long bone defect reconstructed with impaction bone grafting and intramedullary nailing.

Introduction: This study compared the initial viscoelastic properties of a segmental tibial defect stabilized with intramedullary nailing and impaction bone grafting to that of a transverse fracture stabilized with intramedullary nailing.

Materials And Methods: Seven sheep tibiae were tested in compression (1000N), bending and torsion (6Nm) in a six degree-of-freedom hexapod robot. Tests were repeated across three groups: intact tibia (Intact), transverse fracture stabilized by intramedullary nailing (Fracture), and segmental defect stabilized with a nail and impaction bone grafting (Defect).

Stem micromotion after femoral impaction grafting using irradiated allograft bone: a time zero in vitro study.

Background: A gamma irradiation dose of 15kGy has been shown to adequately sterilise allograft bone, commonly used in femoral impaction bone grafting to treat bone loss at revision hip replacement, without significantly affecting its mechanical properties. The objective of this study was to evaluate whether use of 15kGy irradiated bone affects the initial mechanical stability of the femoral stem prosthesis, as determined by micromotion in a comprehensive testing apparatus, in a clinically relevant time zero in vitro model of revision hip replacement.

Methods: Morselised ovine bone was nonirradiated (control), or irradiated at 15kGy or 60kGy.

The impact of tensioning device mal-positioning on strand tension during anterior cruciate ligament reconstruction.

Background: In order to confer optimal strength and stiffness to the graft in Anterior Cruciate Ligament (ACL) reconstruction, the maintenance of equal strand tension prior to fixation, is desired; positioning of the tensioning device can significantly affect strand tension This study aimed to determine the effect of tensioning device mal-positioning on individual strand tension in simulated cadaveric ACL reconstructions.

Methods: Twenty cadaveric specimens, comprising bovine tibia and tendon harvested from sheep, were used to simulate ACL reconstruction with a looped four-strand tendon graft. A proprietary tensioning device was used to tension the graft during tibial component fixation with graft tension recorded using load cells.

The effect of screw taper on interference fit during load to failure at the soft tissue/bone interface.

The effect of screw geometry on the pullout strength of an anterior cruciate ligament reconstruction is well documented. The effect of a truly tapered screw has not been previously investigated. Thirty bovine knees in right and left knee pairs were collected.

An evaluation of interface contact profiles in two low contact bone plates.

Bone plate design has evolved dramatically in recent years. The Dynamic Compression Plate (DCP) has been superseded by bi- and uni-cortical plates that claim a reduced interface contact between the plate and the underlying bone. It is believed that contact reduction ameliorates the localised ischaemia that develops subsequent to plate application.

Suture characteristics following incubation in synovial fluid or phosphate buffered saline.

Selection of an appropriate suture requires a knowledge of many factors. These include its mechanical characteristics, its durability, the period of mechanical effectiveness and the tissue reactivity to the material. Absorbable suture materials were incubated in synovial fluid or phosphate buffered saline, at 37 degrees C, for periods up to 12 weeks.

Biceps tenodesis: a biomechanical study of fixation methods.

Rupture of the biceps tendon occurs predominantly in the middle-aged and elderly, being predisposed through bicipital tendinitis and rotator cuff lesions. Surgical repair may be an option for those requiring strength in supination. This study compared the initial fixation strength of keyhole tenodesis (n = 7) and interference screw fixation by use of cadaveric specimens.