Electromagnetic characterization of carbon nanotube films subject to an oxidative treatment at elevated temperature.

Electromagnetic characterization of CNT films fabricated by thermal decomposition of SiC has been performed. Purification and/or uncapping treatment conditions at an elevated temperature of 400 degrees C under flowing oxygen or carbon dioxide have been studied. A near field microwave microscope was used to measure the real and imaginary parts of the complex permittivity of CNT films through the frequency shift and the change in reciprocal quality factor between two extreme positions of an evanescent microwave probe-tip (in contact with the sample, and away from interaction with it).

Local complex permittivity measurements of porcine skin tissue in the frequency range from 1 GHz to 15 GHz by evanescent microscopy.

The near-field evanescent microwave microscope is based on a coaxial transmission line resonator with a silver plated tungsten tip protruding through an end-wall aperture. The sensor is used to measure the local dielectric properties of porcine skin in the frequency range from 1 GHz to 15 GHz. The dielectric property of the skin within the near field of the tip frustrates the electric field and measurably changes the transmission line's resonant frequency and quality factor (Q).

Microwave characterization of nanostructured ferroelectric Ba(0.6)Sr(0.4)TiO(3) thin films fabricated by pulsed laser deposition.

A series of nanostructured ferroelectric thin films of barium strontium titanate were fabricated using a pulsed laser deposition system with real-time in situ process control. Pulsed laser deposition parameters were controlled during the growth of nanostructured thin films for use in the development of high frequency tunable microwave devices. The thin films were all grown at the same substrate temperature and laser beam energy density, but the chamber oxygen partial pressure (COPP) was varied systematically from 19 mTorr through 1000 Torr.