Meta-analysis of global distribution of root-caries prevalence in middle-aged and elderly.

Introduction: Root caries (RC) remains a global health problem leading to negative impacts on an elderly person's well-being causing oral health-related quality of life issues, as inadequate nutrition and detrimental oral functionality. The present systematic review with meta-analysis is designed to synthesize existing research findings on the prevalence and experience of root caries globally over the past 30 years. It aims to describe its distribution by country and explore its links with various socioeconomic indicators.

Augmented Reality in Dentistry: Enhancing Precision in Clinical Procedures-A Systematic Review.

Augmented reality (AR) enhances sensory perception by adding extra information, improving anatomical localization and simplifying treatment views. In dentistry, digital planning on bidimensional screens lacks real-time feedback, leading to potential errors. However, it is not clear if AR can improve the clinical treatment precision.

Application of Bulk-Fill Composite to Simplify the Cementation of Indirect Restorations: The COMBO Technique.

This article proposes a technique to simplify the cementation of indirect restorations by exploiting the advantageous properties of bulk-fill composites (BFCs). The proposed technique consists of using a thin layer of a high-viscosity (HV) BFC in the interproximal margins of the preparation and applying low-viscosity (LV) resin luting agents (RLAs) to the rest of the prepared surface. The application of the HV BFC limits the extrusion of the LV RLAs in the interproximal area, deviating the excesses of LV RLAs only on the vestibular and lingual side.

Use of over-the-counter mouthwashes as an additional measure in individual oral prophylaxis on adults with plaque-induced gingivitis: a double-blind, parallel, randomized controlled trial.

Background: Plaque-induced gingivitis is a chronic inflammatory condition characterized by complete reversibility of tissue damage once the periodontal biofilm has been disorganised. The aim of this study was to evaluate the efficacy of two commercially available mouthwashes (MWs) versus a chlorhexidine (CHX) 0.12% MW in reducing gingival bleeding (GB) in adults with plaque-induced gingivitis.

Multidisciplinary evaluation of the remineralization potential of three fluoride-based toothpastes on natural white spot lesions.

Objectives: This in vitro study aimed assessing the remineralization potential of three commercial fluoride-based toothpastes in permanent teeth with natural white spot lesions (WSLs). A multidisciplinary approach based on Raman microspectroscopy (RMS), Scanning electron microscopy (SEM), Energy-dispersive x-ray spectroscopy (EDS), and Vickers microhardness (VMH) was exploited.

Methods: N = 12 human molars with natural WSLs in the proximal-vestibular zone were selected and divided into 4 groups (n = 3) according to the different treatments: HAF (hydroxyapatite with fluoride ions); SMF (sodium monofluorophosphate with arginine); SF (sodium fluoride with enzymes), and CTRL (untreated group).

Assessment of the Remineralizing Potential of Biomimetic Materials on Early Artificial Caries Lesions after 28 Days: An In Vitro Study.

This study aimed to evaluate the loss of mineral content in the enamel surface in early artificial lesions and to assess the remineralizing potential of different agents by means of SEM coupled with energy-dispersive X-ray analysis (EDX). The analysis was performed on the enamel of 36 molars divided into six equal groups, in which the experimental ones (3-6) were treated using remineralizing agents for a 28-day pH cycling protocol as follows: Group 1, sound enamel; Group 2, artificially demineralized enamel; Group 3, CPP-ACP treatment; Group 4, Zn-hydroxyapatite treatment; Group 5, NaF 5% treatment; and Group 6, F-ACP treatment. Surface morphologies and alterations in Ca/P ratio were evaluated using SEM-EDX and data underwent statistical analysis ( < 0.

Advances in diastema closure and tooth shape change using direct composite restorations: the Front Wing Technique.

Closing a diastema with a direct composite restoration still represents a real challenge for clinicians, mainly due to the need to create a correct contact point and emergence profile at the cervical level. The present article describes a novel anterior direct composite restoration technique for closing diastemata and changing tooth shape. The proposed technique, called the Front Wing Technique (FWT), does away with the use of the traditional wax-up and silicone index-based procedures.

Micro-computed tomography for assessing the internal and external voids of bulk-fill composite restorations: A technical report.

Purpose: This technical report aims to describe and detail the use of micro-computed tomography for a reliable evaluation of the bulk-fill composite/tooth interface.

Materials And Methods: Bulk-fill composite restorations in tooth cavities were scanned using micro-computed tomography to obtain qualitatively and quantitatively valuable information. Two-dimensional information was processed using specific algorithms, and ultimately a 3-dimensional (3D) specimen reconstruction was generated.

Remineralization Efficacy of Four Remineralizing Agents on Artificial Enamel Lesions: SEM-EDS Investigation.

Dental remineralization represents the process of depositing calcium and phosphate ions into crystal voids in demineralized enamel, producing net mineral gain and preventing early enamel lesions progression. The aim of the present study was to qualitatively and quantitatively compare the remineralizing effectiveness of four commercially available agents on enamel artificial lesions using Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS) techniques. Thirty-six extracted third molars were collected and randomly assigned to six groups (n = 6), five of which were suspended in demineralizing solution for 72 h to create enamel artificial lesions, and one serving as control: G1, treated with a mousse of casein phosphopeptide and amorphous calcium−phosphate (CPP-ACP); G2, treated with a gel containing nano-hydroxyapatite; G3, treated with a 5% SF varnish; G4, treated with a toothpaste containing ACP functionalized with fluoride and carbonate-coated with citrate; G5, not-treated artificial enamel lesions; G6, not demineralized and not treated sound enamel.

Disinfection Procedures and Their Effect on the Microorganism Colonization of Dental Impression Materials: A Systematic Review and Meta-Analysis of In Vitro Studies.

Dental impressions are contaminated with potentially pathogenic microorganisms when they come into contact with patient blood, saliva, and plaque. Numerous disinfectants are used; however, no sole disinfectant can be designated as universal for all the impression materials. Thus, the aim of this study is to systemically review the literature to evaluate the effect of the existing disinfection procedures on the bacterial colonization of dental impression materials.

Hydrogen Peroxide Release Kinetics of Four Tooth Whitening Products-In Vitro Study.

Tooth whitening efficacy can be influenced by several factors, of which concentration and application time are two of the most important. This in vitro study aimed to evaluate the initial content and release kinetics of the hydrogen peroxide (HP) content, or the carbamide peroxide (CP) content as converted to its HP equivalent, of four tooth whitening products with different concentrations (6% HP, 16% CP, 10% CP, and 5% CP). Titrations with Cerium Sulphate IV were performed to determine HP concentration.

Oral Manifestations of COVID-19 in Hospitalized Patients: A Systematic Review.

Background: COVID-19 disease first appeared in 2019 and quickly spread worldwide, causing a global pandemic. The oral cavity represents a target of SARS-CoV-2, and oral lesions are observed in both non-hospitalized and hospitalized patients. This systematic review aims to investigate the frequency of oral manifestations in COVID-19 hospitalized patients.

Comparison of three different bulk-filling techniques for restoring class II cavities: μCT, SEM-EDS combined analyses for margins and internal fit assessments.

Objective: Evaluation of the behavior of three different bulk-filling techniques in terms of internal adaptation and external marginal sealing for restoring class II cavities.

Methods: Fifteen extracted sound molar teeth were used. Two standardized class II mesio/disto-occlusal (MO/DO) slot cavities, 4 mm long, 4 mm wide and 3 mm deep were prepared in each tooth, obtaining n=30 cavity preparations.

Cytotoxic Effects of 5-Azacytidine on Primary Tumour Cells and Cancer Stem Cells from Oral Squamous Cell Carcinoma: An In Vitro FTIRM Analysis.

In the present study, the cytotoxic effects of 5-azacytidine on primary Oral Squamous Cell Carcinoma cells (OSCCs) from human biopsies, and on Cancer Stem Cells (CSCs) from the same samples, were investigated by an in vitro Fourier Transform InfraRed Microscospectroscopy (FTIRM) approach coupled with multivariate analysis. OSCC is an aggressive tumoral lesion of the epithelium, accounting for ~90% of all oral cancers. It is usually diagnosed in advanced stages, and this causes a poor prognosis with low success rates of surgical, as well as radiation and chemotherapy treatments.

A Comparative Evaluation of Nanohydroxyapatite-Enriched Hydrogen Peroxide Home Bleaching System on Color, Hardness and Microstructure of Dental Enamel.

This study aimed to evaluate two hydrogen peroxide (HP)-based at-home bleaching systems in order to analyze whether nano-hydroxyapatite (nHA) addition may represent a reliable and safe solution for tooth whitening without altering dental microstructure and hardness. Human third molars (N = 15) were treated with two bleaching agents, one containing 6%HP (6HP) and the other 6% HP nHA-enriched (6HP-nHA) with average particle diameter ranging from 5-20 nm. Their effects on enamel were assessed using a spectrophotometer, Vickers microhardness (VMH) test and Scanning Electron Microscopy (SEM), comparing the treated groups with the non-treated control group (CTR).

Surface evaluations of a nanocomposite after different finishing and polishing systems for anterior and posterior restorations.

This study aims to evaluate the effects of different finishing and polishing (F/P) systems on gloss and surface morphology of a new nanocomposite. Thirty discs of Filtek Universal Restorative material (3 M, ESPE) were prepared and divided into six groups (n = 5). Group A and B followed F/P protocols for anterior restorations, whereas Group C and D for posterior ones.

New insights from Raman MicroSpectroscopy and Scanning Electron Microscopy on the microstructure and chemical composition of vestibular and lingual surfaces in permanent and deciduous human teeth.

Teeth are characterized by a specific chemical composition and microstructure, which are related to their nature, permanent and deciduous, and to the sides, lingual and vestibular. Deeper knowledge in this topic could be useful in clinical practice to develop new strategies in restorative dentistry and in the choice of materials with the best performances. In this study, Raman MicroSpectroscopy (RMS), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectrometry (EDS), and Vickers MicroHardness (VMH) were exploited to: (1) identify the microstructure and the chemical/elemental composition of permanent and deciduous human teeth, also characterizing their lingual and vestibular sides, and (2) validate a new multidisciplinary analytical approach, for obtaining multiple information on calcified tissues.

Essential Lines: a simplified filling and modeling technique for direct posterior composite restorations.

There is a continuing increase in demand for the direct restoration of posterior teeth with resin-based composites. However, the execution of these restorations, especially the reproduction of the anatomical details of the tooth, still presents difficulties for most clinicians. Nowadays, resin-based composite restorations have become increasingly popular due to the development of new materials and filling techniques.

ATR-FTIR, EDS and SEM evaluations of enamel structure after treatment with hydrogen peroxide bleaching agents loaded with nano-hydroxyapatite particles.

Background: Tooth whitening is one of the most requested dental treatments, but it still presents some side effects. Indeed, the bleaching agent can generate patients' discomfort and dental hard tissue damages, not achieving an efficient and long-lasting treatment with optimum whitening effect. To overcome these limitations, the bleaching agents containing nano-hydroxyapatite can represent a reliable solution to avoid these detrimental effects.

Microleakage Analysis of Different Bulk-Filling Techniques for Class II Restorations: µ-CT, SEM and EDS Evaluations.

This study aimed to compare two different bulk-filling techniques, evaluating the internal and external adaptation of class II resin-composite restorations, by analysing the gap formation using microcomputed tomography (µ-CT) and scanning electronic microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS). Two standardized mesio/disto-occlusal (MO/DO) cavities were prepared in eight extracted human third molars that were divided, according to the filling technique used, in the following two groups (n = 4): BG (Bulk&Go group) and BT (Bulk Traditional group). After universal bonding application, followed by the light curing, all teeth were restored using a bulk-fill composite.

Can Desensitizing Toothpastes Also Have an Effect on Gingival Inflammation? A Double-Blind, Three-Treatment Crossover Clinical Trial.

Background: Many desensitizing toothpastes exist commercially; however, few clinical trials have investigated their anti-inflammatory effects. This study aimed to evaluate the anti-inflammatory effect and patient appreciation of two toothpastes containing desensitizing agents: (1) a zinc-carbonate-hydroxyapatite nanoparticle (CHA) and (2) a calcium sodium phosphosilicate bioactive glass (CSPS).

Methods: CHA and CSPS were compared with an anti-inflammatory and antibacterial herbal based toothpaste (HB).

Comparison of two curing protocols during adhesive cementation: can the step luting technique supersede the traditional one?

This study aims to compare the degree of conversion of two different curing protocols used during adhesive cementation. The following resin luting agents were tested: Hri Flow (MF) and pre-heated Hri Micerium (MH); light-cure Nexus Third Generation (NX3L) and dual-cure Nexus Third Generation (NX3D); dual cured RelyX Ultimate (RXU) and light-cure RelyX Veneers (RXL). For each tested material, ten samples were prepared and divided into two groups which had different curing protocols (P1 and P2): in P1, samples were cured for 40 s; in P2, samples were cured for 5 s, and then, after 20 s, cured again for additional 40 s.

How Can Different Polishing Timing Influence Methacrylate and Dimethacrylate Bulk Fill Composites? Evaluation of Chemical and Physical Properties.

The polishing procedure is commonly performed after direct composite restorations, and little information exists regarding the right timing during which it should be performed on bulk fill composites. This study investigated the effect of polishing timing on the degree of conversion (DC), Vickers microhardness (VMH), and surface morphology of a methacrylate- (MET-) and dimethacrylate- (DMET-) based bulk fill composite, by using FT-NIR, microhardness tester, and SEM. Composite samples were divided as follows: in Group I (immediate), samples were polished immediately after curing ( ); in Group D (delayed), samples were polished after 24 h from curing ( ), whereas the unpolished samples were considered as controls (Group C).

Effect of four different finishing and polishing systems on resin composites: roughness surface and gloss retention evaluations.

Background: Finishing and polishing procedures play a crucial role to achieve the best aesthetic result of direct restorations. Many manufacturers to the clinicians offer different finishing and polishing systems. This study aims to examine the behavior of four different finishing and polishing systems on the roughness, gloss and morphology surface of one resin composite.

Efficacy of an All-Natural Polyherbal Mouthwash in Patients With Periodontitis: A Single-Blind Randomized Controlled Trial.

This study aimed to evaluate the anti-inflammatory effect and the incidence of adverse effects of an all-natural polyherbal mouthwash in patients with periodontitis, after 3 months of use. These aims were accomplished by using full mouth bleeding score (FMBS), full mouth plaque score (FMPS), probing depth (PD) clinical attachment level (CAL) and a questionnaire recording any adverse events. The present randomized controlled clinical study considered 40 patients with moderate or severe periodontitis, randomized in two groups: a test group (TG) and a control group (CG).