Evaluation of the bonding strength of conventional, anatomized, adjustable, and CAD/CAM milled fiberglass posts in weakened endodontically treated roots.

This study evaluated the bond strength (BS) of conventional, anatomized, adjustable, and CAD/CAM fiberglass post systems. Forty maxillary canine roots were weakened, endodontically treated, and divided into four groups (n=10). A slice from each of the three sections (cervical, middle, apical) of the root canal was subjected to the push-out test and the failure pattern was subsequently analyzed.

Cone-beam computed tomographic evaluation of the root canal anatomy of the lower premolars and molars in a Brazilian sub-population.

Purpose: This study evaluated anatomical variations in the root canals of the lower premolars and molars in a Brazilian sub-population using cone-beam computed tomography (CBCT).

Materials And Methods: In total, 121 CBCT images of patients were selected from a database. All images contained lower first and second premolars and molars on both sides of the arch, fully developed roots, and no treatment, resorption, or calcifications.

Analysis of the mandibular molars root canals morphology. Study by computed tomography.

This study aimed to analyze the root and root canal morphology of mandibular first and second molars using CBCT images. A total of 2,400 mandibular molars exams were selected from 600 patients aged between 18 and 75 years. The number of roots, number of root canals, and root canal configuration according to the Vertucci classification were verified.

Guided endodontics of calcified canals: The drilling path of rotary systems and intracanal dentin wear.

This study evaluated the drilling path (mm) and the dentin wear (mm ) of two instruments used during guided endodontic access. Twenty mandibular incisors with calcified canals were selected using cone-beam computed tomography (CBCT) and fixed in articulated models. Preoperative CBCT scans were performed in combination with intraoral scanning, and the images were reconstructed in the Blue Sky Bio software for access planning and printing the guides.

Influence of anatomical features in the endodontic treatment planning of maxillary anterior teeth.

This study evaluate the maxillary anterior teeth anatomy by micro-computed tomography (μCT), about relevant characteristic for endodontic treatment planning. Fifty maxillary central incisors (MCI), lateral incisors (MLI) and maxillary canines (MC) were scanned using a μCT device. Two and three-dimensional parameters at 1 to 5mm distance to the apical foramen, external anatomic characteristics of the teeth and qualitative analysis of the internal anatomy was performed.

An ultrasonic-based experimental model to evaluate the setting time of endodontic sealers.

Aim: To evaluate an ultrasonic-based experimental model (US), to assess the setting time of AH Plus , Bio-C Sealer and MTA Fillapex , and compare the results obtained with ANSI/ADA specifications (2012).

Methods: To determine the setting time according to the ANSI/ADA specification, moulds measuring 10 mm (diameter) × 2 mm (thickness) were used, and for the US tests a transducer (1 MHz) and an oscilloscope were used. Fourier-transform infrared spectroscopy (FTIR) was used to evaluate the changes on chemical structure at the different setting times found by the US and ANSI/ADA methods.

Panoramic Dental Radiography Image Enhancement Using Multiscale Mathematical Morphology.

Panoramic dental radiography is one of the most used images of the different dental specialties. This radiography provides information about the anatomical structures of the teeth. The correct evaluation of these radiographs is associated with a good quality of the image obtained.

Influence of endodontic sealers with different chemical compositions on bond strength of the resin cement/glass fiber post junction to root dentin.

Objective: This study evaluated the influence of endodontic sealers with different chemical compositions on bond strength of resin cement/glass fiber post junction to root dentin.

Materials And Methods: Seventy-two maxillary canines roots were instrumented with Reciproc (#R50) and distributed in 6 groups (n = 12) according to endodontic sealers: G1-control (no sealer); G2-Endofill; G3-Sealapex; G4-AH Plus; G5-Sealer Plus; G6-EndoSequence BC. The glass fiber post was cemented with Panavia F in 10 of the specimens.

Comparative effects of final canal irrigation with chitosan and EDTA.

Other: Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength.

Methodology: Fifty canine roots were distributed according to the final irrigation protocol (n=10): G1- 15% EDTA with conventional irrigation; G2- 15% EDTA with Endovac; G3- 0.

Changes in Geometry and Transportation of Root Canals with Severe Curvature Prepared by Different Heat-treated Nickel-titanium Instruments: A Micro-computed Tomographic Study.

Introduction: The aim of this study was to compare the shaping ability of 4 different nickel-titanium systems, considering their variation in alloy treatment, kinematics, and design, used to prepare canals with severe curvature using micro-computed tomographic analysis.

Methods: Thirty-two mesial roots of mandibular molars with severe curvature were matched based on similar morphologic dimensions and assigned to 4 experimental groups (n = 8) according to the canal preparation: ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), Reciproc (RC; VDW GmbH, Munich, Germany), Reciproc Blue (RCB, VDW GmbH), and TRUShape (TRU; Dentsply Tulsa Dental Specialties, Tulsa, OK) systems. Changes in 2-dimensional (area and perimeter) and 3-dimensional (volume, surface area, and structure model index) morphologic parameters as well as canal transportation were compared among groups using the analysis of variance post hoc Tukey tests with the significance level set at 5%.

Evaluation of 17% EDTA and 10% citric acid in smear layer removal and tubular dentin sealer penetration.

The purpose of this study was to compare the efficacy of different chelating solutions (17% EDTA and 10% citric acid) on the smear layer removal, and their effect on tubular dentin sealer penetration. Sixty root canals were prepared and distributed into four groups (n = 15) according to the final irrigation protocol: G1, final irrigation with 2.5 mL of distilled water; G2, final irrigation with 2.

In vitro bond strength of an epoxy resin-based root canal sealer to root dentin irradiated with high-power lasers and adhesive interface analyses.

The aim of this study was to evaluate in vitro the influence of high-power lasers (Nd:YAG and diode 980 nm) associated with mineral coal as fotopotencializer on bond strength of an epoxy resin-based root canal sealer to root dentin, using the pushout test, and on the dentin/filling material interface, using confocal laser microscopy. For this purposes, 50 canines were instrumented with Mtwo rotary system up to #50.04 instrument and randomly assigned to five groups (n = 10): group I-control EDTAC; group II-EDTAC and Nd:YAG laser; group III-EDTAC and diode laser 980 nm; group IV-EDTAC, Nd:YAG laser and mineral coal 5 g/100 mL; and group V-EDTAC, diode laser 980 nm and mineral coal 5 g/100 mL.

Analysis of the shelf life of chitosan stored in different types of packaging, using colorimetry and dentin microhardness.

Objectives: Chitosan has been widely investigated and used. However, the literature does not refer to the shelf life of this solution. This study evaluated, through the colorimetric titration technique and an analysis of dentin micro-hardness, the shelf life of 0.

Geminated Maxillary Lateral Incisor with Two Root Canals.

This paper reports a case of gemination in a maxillary lateral incisor with two root canals and crown-root dilaceration. A 16-year-old male patient was referred for endodontic treatment of the maxillary left lateral incisor and evaluation of esthetic and functional complaints in the anterior region. The patient reported trauma to the anterior primary teeth.

Morphological Study and Analysis of Microhardness and Permeability of the Furcation of Maxillary Premolars.

The morphology, microhardness and dentin permeability of the furcation region of maxillary premolars were evaluated. Ten premolars were cut lengthwise and the furcation region was delimited. In one group (n=10) microhardness was measured in the buccal, central and palatal regions, in the outer middle and inner layers of the furcation, and in the buccal and palatal regions adjacent to the furcation.

Volume of sealer in the apical region of teeth filled by different techniques: a micro-CT analysis.

The volume of sealer in the apical 1 mm of teeth filled using different techniques was evaluated by micro-commuted tomography (micro-CT). Sixty-four maxillary central incisors were prepared using NiTi rotary instruments. Teeth were randomly distributed into four groups according to root canal sealers (AH Plus, Endofill, Sealapex, and Sealer 26) and subdivided into two subgroups according to the filling techniques (active and passive lateral condensation; n = 8 each).

Study of Anatomical Relationship between Posterior Teeth and Maxillary Sinus Floor in a Subpopulation of the Brazilian Central Region Using Cone-Beam Computed Tomography - Part 2.

This study evaluated the anatomical relationship between posterior teeth root apices and maxillary sinus floor (MSF) on 202 cone beam computed tomography (CBCT) exams. The distance between the root apices and the MSF, as well as the MSF thickness of the cortical bone closest to root apices and furcation regions were measured. The vertical and horizontal relationships of the MSF with the molar roots were classified into categories adapted from the criteria proposed by Kwak et al.

Study of Root Canal Anatomy in Human Permanent Teeth in A Subpopulation of Brazil's Center Region Using Cone-Beam Computed Tomography - Part 1.

The aim of this study was to evaluate the frequency of roots, root canals and apical foramina in human permanent teeth using cone beam computed tomography (CBCT). CBCT images of 1,400 teeth from database previously evaluated were used to determine the frequency of number of roots, root canals and apical foramina. All teeth were evaluated by preview of the planes sagittal, axial, and coronal.

Comparison of two techniques for selection of master gutta-percha cone using micro-computed tomography.

This study used micro-computed tomography (micro-CT) to evaluate the fit of the master gutta-percha cone at time of cone fit, gutta-percha volume in the filling material, and the filling material volume in relation to the canal at the apical limit of the working length. Root canals of 20 maxillary central incisors were prepared with rotary instruments and distributed into two groups (n=10). The gutta-percha cone tip was either plasticized (apical thermal impression technique - ATI) or not (conventional technique - CT), and its apical fit was checked.

Flexural properties, morphology and bond strength of fiber-reinforced posts: influence of post pretreatment.

The aim of this study was to assess the influence of surface pretreatments of fiber-reinforced posts on flexural strength (FS), modulus of elasticity (ME) and morphology of these posts, as well as the bond strength (BS) between posts and core material. Fifty-two fiber posts (smooth and serrated) were assigned to 4 groups (n=13): no treatment (control), 10% hydrogen peroxide (HP) for 10 min (HP-10), 24% HP for 1 min (HP-24) and airborne-particle abrasion (Al(2)O(3)). To evaluate FS and ME, a 3-point bending test was performed.

Effect of light-activation with different light-curing units and time intervals on resin cement bond strength to intraradicular dentin.

The aim of this study was to assess the bond strength of a resin cement to intraradicular dentin varying the light-curing unit and the moment at which the light was applied. Post spaces of endodontically treated canines were prepared. The roots were distributed into 6 groups (n=10) according to the light-curing unit and the moment of light exposure: I) Quartz tungsten halogen-600 mW/cm² (QTH) + immediate light activation (t0); II) QTH + light activation after 10 min (t10); III) Light-emitting diodes (LED)-800 mW/cm² (LED-800)+ t0; IV) LED-800 + t10; V) LED-1,500 mW/cm² (LED-1500)+ t0; VI) LED-1500 + t10.

Analysis of the interface and bond strength of resin-based endodontic cements to root dentin.

This study evaluated by scanning electron microscopy the interface between root dentin and resin cements, with or without additional application of a dual-cured one-step self-etching dentin adhesive. In addition, the push-out bond strength of these materials to dentin was evaluated. Root canals of 50 maxillary human canines were subjected to biomechanical preparation and randomly assigned into five groups (n = 10) according to the obturation employed: I.

Analysis of kinematic, kinetic and electromyographic patterns during root canal preparation with rotary and manual instruments.

Objective: This study assessed the muscular activity during root canal preparation through kinematics, kinetics, and electromyography (EMG).

Material And Methods: The operators prepared one canal with RaCe rotary instruments and another with Flexo-files. The kinematics of the major joints was reconstructed using an optoelectronic system and electromyographic responses of the flexor carpi radialis, extensor carpi radialis, brachioradialis, biceps brachii, triceps brachii, middle deltoid, and upper trapezius were recorded.

Cutting efficiency of four different rotary nickel: Titanium instruments.

Aim: The aim of this study was to evaluate the cutting efficiency of rotary nickel-titanium (NiTi) instruments K3, NiTi Tee, Profile, and Quantec with taper size 04/25.

Materials And Methods: The number of samples was 10 for each group (n = 10). The cutting efficiency was measured by the mass loss from each acrylic resin block after instrumentation of a simulated canal using the Crown-down technique.

Fracture resistance of teeth subjected to internal bleaching and restored with different procedures.

This study evaluated the fracture resistance of teeth submitted to internal bleaching and restored with different procedures. Forty maxillary incisors were endodontically treated and assigned to 4 groups (n=10): G1- restored with composite resin (CR), G2- bleached with hydrogen peroxide (HP) and restored with CR, G3- restored with CR and fiberglass posts (CR + posts) and G4- bleached and restored with CR + posts. HP was applied in the buccal surface and pulp chamber 3 times at each one of 2 sessions with an interval of 7 days between them.