Thermal Effects on Dental Pulp during Laser-Assisted Bleaching Procedures with Diode Lasers in a Clinical Study.

In the current cosmetics industry, bleaching is often associated with lasers. However, such treatment also harbors risks. Tooth death is observed at pulpal temperature increases ≥5.

Evaluation of tooth color change after a bleaching process with different lasers.

The aim of this in vitro study was to evaluate the efficiency of diode laser-activated bleaching systems for color change of teeth. 75 extracted teeth were studied in five different bleaching protocols. Group 1: diode laser 445 nm, 320 µm fiber, 0.

Effectiveness of laser-assisted gingival troughing and conventional gingival displacement methods in fixed prosthodontics: A systematic review.

Statement Of Problem: High-level evidence that gingival troughing using dental lasers has better outcomes for the management of gingival tissue surrounding prepared teeth compared with conventional gingival displacement methods is lacking.

Purpose: The purpose of this systematic review was to review in vivo studies on gingival troughing using dental lasers to compare achieved gingival displacement, influence on periodontal health, and other relevant clinical parameters with different existing gingival displacement methods.

Material And Methods: The study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement and identified studies through January 2022.

Effect of Er,Cr:YSGG laser with a side-firing tip on decontamination of titanium disc surface: an in vitro and in vivo study.

Purpose: To evaluate the effectiveness of an erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser with side-firing tip in decontamination of titanium (Ti) disc.

Methods: In the first test series, 29 Ti-discs were contaminated with Staphylococcus aureus and treated as follows: positive control (no treatment); Perioflow; Laser A (0.75 W, 100 Hz), Laser B (1.

Er,Cr:YSGG Laser Surface Modification Effect on Dentin Bonding to Zirconia: An Study.

This study investigated the effect of dentin surface treatment with the erbium, chromium-doped yttrium, scandium, gallium, and garnet (Er,Cr:YSGG) laser on the bond strength of zirconia to dentin. Although it is well-known that resin cement (RC) provides adequate bond strength of zirconia restorations to the tooth structure, many clinicians were not convinced in bonding reliability to zirconia materials. So, they preferred cementing their crowns with glass-ionomer cement (GIC).

Effect of Low-Level Er: YAG (2940 nm) laser irradiation on the photobiomodulation of mitogen-activated protein kinase cellular signaling pathway of rodent cementoblasts.

Backgrounds: Dental avulsion due to trauma, especially in young patients, is a worldwide problem, requiring tooth replacement. Delayed replantation could cause tooth loss when the cementum is severely damaged. A small number of studies has reported that photobiomodulation (PBM) therapy using Er: YAG laser irradiation activates cellular signaling responses in different cell types, resulting in a variety of favorable biological effects.

Laterally closed tunnel technique with and without adjunctive photobiomodulation therapy for the management of isolated gingival recession-a randomized controlled assessor-blinded clinical trial.

The objective of this prospective randomized controlled single-center clinical trial was to prove the efficacy of adjunctive photobiomodulation in improving selected outcomes following the use of laterally closed tunnel technique for the management of isolated gingival recession. Nineteen participants (with isolated gingival recession) each treated by laterally closed tunnel technique were randomized to either add on treatment with control (sham laser application) or test group (photobiomodulation with 660 nm diode, 3.5 J/cm per point of application).

Two-year outcomes following the adjunctive use of InGaAsP and Er,Cr:YSGG lasers in nonsurgical periodontal therapy in patients with stages III and IV periodontitis.

Objective: To evaluate the clinical outcomes 2 years after the adjunctive use of an InGaAsP diode and Er,Cr:YSGG laser for nonsurgical treatment of severe periodontitis.

Method And Materials: Forty-two patients (45.31 ± 9.

First Investigation of Dual-Wavelength Lasers (2780 nm Er,Cr:YSGG and 940 nm Diode) on Implants in a Simulating Peri-Implantitis Situation Regarding Temperature Changes in an Pocket Model.

This study aimed to investigate the temperature changes and question the safe laser settings and protocols for laser-assisted peri-implantitis treatment in an environment. Three types of implants (Neoss, Dentegris, and Camlog) were implanted in an artificial bone model ( = 15). The model was placed into a 37°C water bath to simulate the oral condition.

Adjunctive use of InGaAsP and Er,Cr:YSGG lasers in nonsurgical periodontal therapy: a randomized controlled clinical study.

Objective: To evaluate clinically and microbiologically the outcomes following the combined application of InGaAsP diode laser and Er,Cr:YSGG laser for nonsurgical treatment of chronic periodontitis (ChP).

Method And Materials: Forty-two patients (age 45.31 ± 9.

The Impact of a 940 nm Diode Laser with Radial Firing Tip and Bare End Fiber Tip on Enterococcus faecalis in the Root Canal Wall Dentin of Bovine Teeth: An In Vitro Study.

Objective: This in vitro study aimed to compare the bactericidal effect of two different laser delivery systems, a radial firing tip (RFT) and bare end fiber tip (BFT) used with the 940 nm diode laser on Enterococcus faecalis inoculated onto bovine radicular dentin.

Materials And Methods: A total of 100 bovine dentin slices with a defined thickness of 500 and 1000 μm were prepared. They were assigned into four test groups together with untreated samples served as control for each slice thickness.

The effectiveness of the Erbium:Yttrium aluminum garnet PIPS technique in comparison to different chemical solutions in removing the endodontic smear layer-an in vitro profilometric study.

This study evaluated the degree of endodontic smear layer removal using the Er:YAG PIPS technique (2.94 μm) in comparison with different irrigants. Sixty-four single-rooted teeth were endodontically prepared up to size #40 and were divided into 8 groups (a-h) (n = 8).

Creating a Regional Model to Coordinate and Prioritize Access to Permanent Supportive Housing.

Demand for supportive housing outstrips availability in metropolitan regions around the country. Individuals who are homeless with serious mental illnesses, substance abuse, and other debilitating health conditions are often heavy users of publicly financed services and institutions, such as jails, emergency departments, psychiatric and medical hospitals, and sobering and detoxification services. King County, in collaboration with community partners, has developed a regional system for coordinating and prioritizing access to this limited resource based on utilization of publicly financed services/institutions and/or vulnerability.

Root Surface Temperature Changes During Root Canal Laser Irradiation with Dual Wavelength Laser (940 and 2780 nm): A Preliminary Study.

Objective: This study aimed to evaluate the temperature changes on the root surface during root canal irradiation using 2780 nm erbium, chromium: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) and 940 nm diode lasers in an alternating sequence.

Materials And Methods: Eighteen single-rooted human teeth were randomly divided into three groups (n = 6). Teeth were embedded in a resin block, and six thermocouples were introduced at different positions on the tooth surfaces, while immersed in a 37°C thermal bath during laser irradiation.

Fracture Forces of Dentin after Surface Treatment with High Speed Drill Compared to Er:YAG and Er,Cr:YSGG Laser Irradiation.

Dental tooth restorative procedures may weaken the structural integrity of the tooth, with the possibility of leading to fracture. In this study we present findings of coronal dentin strength after different techniques of surface modification. The fracture strength of dentin beams after superficial material removal with a fine diamond bur high speed drill hand piece, Er:YAG (2.

Removal of Dental Implants Using the Erbium,Chromium:Yttrium-Scandium-Gallium-Garnet Laser and the Conventional Trephine Bur: An in Vitro Comparative Study.

Objective: The purpose of this study was to compare the conventional trephine bur and the Erbium,chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser in removing implants in terms of the volume of removed bone, duration of the procedure, and morphological changes on the bone surface.

Materials And Methods: Three human mandibles were utilized, and four implants were inserted in each mandible using a drilling handpiece and burs. The implants were divided into two groups (n = 6) in which two implants from each mandible were removed using a trephine bur running at 1200 rounds per minute (rpm) with water irrigation.

The Bactericidal Effect of 2780 and 940 nm Laser Irradiation on Enterococcus faecalis in Bovine Root Dentin Slices of Different Thicknesses.

Objective: The aim of this in vitro study was to investigate the antibacterial effect of the dual wavelength (2780 nm Er,Cr:YSGG and 940 nm diode) laser in elimination of Enterococcus faecalis in comparison with a 2780 nm Er,Cr:YSGG laser alone.

Background Data: Various laser wavelengths have been introduced as an adjunct in root canal treatment because of laser's bactericidal effect.

Materials And Methods: Seventy- five slices of dentin with thicknesses of 300, 500, and 1000 μm (n = 25 each) obtained from caries-free bovine teeth were inoculated with 1 μL of E.

Investigations of radicular dentin permeability and ultrastructural changes after irradiation with Er,Cr:YSGG laser and dual wavelength (2780 and 940 nm) laser.

The aim of this study was to assess the effectiveness of dual wavelength (2780 nm Er,Cr:YSGG, 940 nm diode) laser in elimination of smear layer comparing it with Er,Cr:YSGG laser in terms of radicular dentin permeability and ultrastructural changes of root canal walls. Fifty-one sound single-rooted extracted teeth were instrumented up to size F4 and divided into three groups: group Co, non-irradiated samples; group A, irradiated with Er,Cr:YSGG laser; group B, irradiated with the dual wavelength laser. Afterward, the roots were made externally impermeable, filled with 2% methylene blue dye, divided horizontally into three segments reflecting the cervical, middle, and apical thirds then examined under microscope.

Intrapulpal temperature changes during root surface irradiation with dual-wavelength laser (2780 and 940 nm): in vitro study.

This work reports that the ablation volume and rate of porcine skin changed significantly with the change of skin water content. Under the same laser irradiation conditions (532 nm Nd:YAG laser, pulse width = 11.5 ns, pulse energy = 1.

Analysis of laser transmission and thermal effects on the inner root surface during periodontal treatment with a 940-nm diode laser in an in vitro pocket model.

The purpose of this study was to analyze thermal effects during laser-assisted periodontal treatment. An in vitro model for temperature measurements was developed to investigate different laser settings regarding pulp safety. Additionally, the influence of transmission on pulp temperature elevation was evaluated.

Effects of diode laser on direct pulp capping treatment : a pilot study.

At the present time, evidence-based, best practices have yet to be established for maintaining the vitality of teeth by managing caries-associated pulp exposure in permanent teeth. In terms of biomechanical and esthetic considerations, pulp capping has proven to be more effective than root-canal therapy. Given the low success rate of conventional methods, new techniques, such as laser-assisted repairs, should be developed.

Laser treatment of dental ceramic/cement layers: transmitted energy, temperature effects and surface characterisation.

In the present paper, we investigate the behaviour of different dental materials under laser irradiation. We have used e.max Ceram, e.

Rapid debonding of polycrystalline ceramic orthodontic brackets with an Er:YAG laser: an in vitro study.

The usefulness of erbium-doped yttrium aluminum garnet laser irradiation for debonding ceramic brackets is assessed using a single laser pulse. Damon Clear brackets were chosen for their 85% transmission of 2.94 μm radiation and were bonded to 20 human third molars using the Blugloo adhesive system.

Shear strength of composite bonded to Er:YAG laser-prepared enamel: an in vitro comparative study.

Unlabelled: The primary objective of this study is to investigate the adhesion properties between four current generations of bonding systems and enamel surface conditioned by Er:YAG laser, using an energy density comparable to the ablation threshold of enamel. By including an energy density comparable to published adhesion studies, the secondary objective is to compare the adhesion effects of these selected laser conditioning parameters on enamel with other similar published studies.

Material And Methods: Buccal sides of randomly selected human molars (N=117) were prepared and divided into nine experimental groups depending on the generations of bonding system represented by the corresponding number (G4, G5, G6, G7) and the additional laser conditioning on the enamel surface represented by laser etch (LE) and laser etch with a higher pulse energy, followed by acid etch (AE), if required.