Ferroelectric switching and electrochemistry of pyrrole substituted trialkylbenzene-1,3,5-tricarboxamides.

We explore a new approach to organic ferroelectric diodes using a benzene-tricarboxamide (BTA) core connected with C10 alkyl chains to pyrrole groups, which can be polymerized to provide a semiconducting ferroelectric material. The compound possesses a columnar hexagonal liquid crystalline (LC) phase and exhibits ferroelectric switching. At low switching frequencies, an additional process occurs, which leads to a high hysteretic charge density of up to ∼1000 mC/m.

The Role of the Axial Substituent in Subphthalocyanine Acceptors for Bulk-Heterojunction Solar Cells.

Four hexachlorosubphthalocyanines SubPcCl -X bearing different axial substituents (X) have been synthesized for use as novel electron acceptors in solution-processed bulk-heterojunction organic solar cells. Subphthalocyanines are aromatic chromophoric molecules with cone-shaped structure, good solution processability, intense optical absorption in the visible spectral region, appropriate electron mobilities, and tunable energy levels. Solar cells with subphthalocyanines as the electron acceptor and PTB7-Th as the electron donor exhibit a power conversion efficiency up to 4 % and an external quantum efficiency approaching 60 % due to significant contributions from both the electron donor and the electron acceptor to the photocurrent, indicating a promising prospect of non-fullerene acceptors based on subphthalocyanines and structurally related systems.

Water Splitting with Series-Connected Polymer Solar Cells.

We investigate light-driven electrochemical water splitting with series-connected polymer solar cells using a combined experimental and modeling approach. The expected maximum solar-to-hydrogen conversion efficiency (η) for light-driven water splitting is modeled for two, three, and four series-connected polymer solar cells. In the modeling, we assume an electrochemical water splitting potential of 1.

Toward Practical Useful Polymers for Highly Efficient Solar Cells via a Random Copolymer Approach.

Using benzo[1,2-b:4,5-b']dithiophene and two matched 5,6-difluorobenzo[2,1,3]thiadiazole-based monomers, we demonstrate that random copolymerization of two electron deficient monomers, alternating with one electron rich monomer, forms a successful approach to synthesize state-of-the-art semiconducting copolymers for organic solar cells. Over a range of compositions, these random copolymers provide impressive power conversion efficiencies (PCEs) of about 8.0%, higher than those of their binary parent polymers, and with little batch-to-batch variation.

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.

Growing interests have been devoted to the design of polymer acceptors as potential replacement for fullerene derivatives for high-performance all polymer solar cells (all-PSCs). One key factor that is limiting the efficiency of all-PSCs is the low fill factor (FF) (normally <0.65), which is strongly correlated with the mobility and film morphology of polymer:polymer blends.

Dichotomous Role of Exciting the Donor or the Acceptor on Charge Generation in Organic Solar Cells.

In organic solar cells, photoexcitation of the donor or acceptor phase can result in different efficiencies for charge generation. We investigate this difference for four different 2-pyridyl diketopyrrolopyrrole (DPP) polymer-fullerene solar cells. By comparing the external quantum efficiency spectra of the polymer solar cells fabricated with either [60]PCBM or [70]PCBM fullerene derivatives as acceptor, the efficiency of charge generation via donor excitation and acceptor excitation can both be quantified.

Electro-optical Properties of Neutral and Radical Ion Thienosquaraines.

Thienosquaraines are an interesting class of electroactive dyes that are useful for applications in organic electronics. Herein, the redox chemistry and electrochromic response of a few newly synthesized thienosquaraines are presented. These properties are compared to those of the commercial 2,4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl]squaraine.

Pulse-modulated multilevel data storage in an organic ferroelectric resistive memory diode.

We demonstrate multilevel data storage in organic ferroelectric resistive memory diodes consisting of a phase-separated blend of P(VDF-TrFE) and a semiconducting polymer. The dynamic behaviour of the organic ferroelectric memory diode can be described in terms of the inhomogeneous field mechanism (IFM) model where the ferroelectric components are regarded as an assembly of randomly distributed regions with independent polarisation kinetics governed by a time-dependent local field. This allows us to write and non-destructively read stable multilevel polarisation states in the organic memory diode using controlled programming pulses.

Highly Efficient Hybrid Polymer and Amorphous Silicon Multijunction Solar Cells with Effective Optical Management.

Highly efficient hybrid multijunction solar cells are constructed with a wide-bandgap amorphous silicon for the front subcell and a low-bandgap polymer for the back subcell. Power conversion efficiencies of 11.6% and 13.

Diketopyrrolopyrrole Polymers for Organic Solar Cells.

Conjugated polymers have been extensively studied for application in organic solar cells. In designing new polymers, particular attention has been given to tuning the absorption spectrum, molecular energy levels, crystallinity, and charge carrier mobility to enhance performance. As a result, the power conversion efficiencies (PCEs) of solar cells based on conjugated polymers as electron donor and fullerene derivatives as electron acceptor have exceeded 10% in single-junction and 11% in multijunction devices.

Asymmetric Diketopyrrolopyrrole Conjugated Polymers for Field-Effect Transistors and Polymer Solar Cells Processed from a Nonchlorinated Solvent.

Newly designed asymmetric diketopyrrolopyrrole conjugated polymers with two different aromatic substituents possess a hole mobility of 12.5 cm(2) V(-1) s(-1) in field-effect transistors and a power conversion efficiency of 6.5% in polymer solar cells, when solution processed from a nonchlorinated toluene/diphenyl ether mixed solvent.

Ambipolar Organic Tri-Gate Transistor for Low-Power Complementary Electronics.

Ambipolar transistors typically suffer from large off-current inherently due to ambipolar conduction. Using a tri-gate transistor it is shown that it is possible to electrostatically switch ambipolar polymer transistors from ambipolar to unipolar mode. In unipolar mode, symmetric characteristics with an on/off current ratio of larger than 10(5) are obtained.

The effect of branching in a semiconducting polymer on the efficiency of organic photovoltaic cells.

The impact of branching in a diketopyrrolopyrrole polymer on the performance of polymer-fullerene photovoltaic cells is investigated. Compared to the linear polymer, the branched polymer affords a more finely dispersed fibrillar network in the photoactive layer and as a result a large enhancement of the photocurrent and power conversion efficiency.

The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication.

Moisture, in the form of ambient humidity, has a significant impact on methylammonium lead halide perovskite films. In particular, due to the hygroscopic nature of the methylammonium component, moisture plays a significant role during film formation. This issue has so far not been well understood and neither has the impact of moisture on the physical properties of resultant films.

High Performance Polymer Nanowire Field-Effect Transistors with Distinct Molecular Orientations.

Polymer nanowires based on two diketopyrrolopyrrole conjugated polymers with similar chemical structures are shown to have distinct "edge-on" and "face-on" configurations in addition to high well-balanced hole and electron mobilities of 5.47 and 5.33 cm(2) V(-1) s(-1) in field-effect transistors.

Large-area soft-imprinted nanowire networks as light trapping transparent conductors.

Using soft-imprint nanolithography, we demonstrate large-area application of engineered two-dimensional polarization-independent networks of silver nanowires as transparent conducting electrodes. These networks have high optical transmittance, low electrical sheet resistance, and at the same time function as a photonic light-trapping structure enhancing optical absorption in the absorber layer of thin-film solar cells. We study the influence of nanowire width and pitch on the network transmittance and sheet resistance, and demonstrate improved performance compared to ITO.

Deep absorbing porphyrin small molecule for high-performance organic solar cells with very low energy losses.

We designed and synthesized the DPPEZnP-TEH molecule, with a porphyrin ring linked to two diketopyrrolopyrrole units by ethynylene bridges. The resulting material exhibits a very low energy band gap of 1.37 eV and a broad light absorption to 907 nm.

A regioregular terpolymer comprising two electron-deficient and one electron-rich unit for ultra small band gap solar cells.

A regioregular terpolymer that combines electron-deficient diketopyrrolopyrrole and benzothiadiazole units with an electron-rich dithienopyrrole unit is presented. In solar cells, the terpolymer affords an open circuit voltage of 0.52 V and a power conversion efficiency of 3.

High quantum efficiencies in polymer solar cells at energy losses below 0.6 eV.

Diketopyrrolopyrrole-based conjugated polymers bridged with thiazole units and different donors have been designed for polymer solar cells. Quantum efficiencies above 50% have been achieved with energy loss between optical band gap and open-circuit voltage below 0.6 eV.

A real-time study of the benefits of co-solvents in polymer solar cell processing.

The photoactive layer of organic solar cells consists of a nanoscale blend of electron-donating and electron-accepting organic semiconductors. Controlling the degree of phase separation between these components is crucial to reach efficient solar cells. In solution-processed polymer-fullerene solar cells, small amounts of co-solvents are commonly used to avoid the formation of undesired large fullerene domains that reduce performance.

Small-bandgap semiconducting polymers with high near-infrared photoresponse.

Lowering the optical bandgap of conjugated polymers while maintaining a high efficiency for photoinduced charge transfer to suitable electron acceptors such as fullerene has remained a formidable challenge in the area of organic photovoltaics. Here we present the synthesis and application of a series of ultra-small-bandgap donor-acceptor polymers composed of diketopyrrolopyrrole as acceptor and pyrrole-based groups as strong donors. The HOMO energy levels of the polymers can be progressively increased by increasing the donor strength while the LUMO level remains similar, resulting in optical bandgaps between 1.

Indium tin oxide-free tandem polymer solar cells on opaque substrates with top illumination.

Top-illuminated, indium tin oxide (ITO)-free, tandem polymer solar cells are fabricated on opaque substrates in an inverted device configuration. In the tandem cell, a wide band gap subcell, consisting of poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) blended with [70]PCBM is combined with a small band gap subcell consisting of a mixture of poly[{2,5-bis(2-hexyldecyl)-2,3,5,6-tetrahydro-3,6-dioxopyrrolo[3,4-c]pyrrole-1,4-diyl}-alt-{[2,2'-(1,4-phenylene)bisthiophene]-5,5'-diyl}] (PDPPTPT) and [60]PCBM. Compared to the more common bottom-illuminated inverted tandem polymer solar cells on transparent ITO substrates, the front and back cells must be reversed when using opaque substrates and a transparent and conductive top contact must be employed to enable top illumination.

Homocoupling defects in diketopyrrolopyrrole-based copolymers and their effect on photovoltaic performance.

We study the occurrence and effect of intrachain homocoupling defects in alternating push-pull semiconducting PDPPTPT polymers based on dithienyl-diketopyrrolopyrrole (TDPPT) and phenylene (P) synthesized via a palladium-catalyzed cross-coupling polymerization. Homocoupled TDPPT-TDPPT segments are readily identified by the presence of a low-energy shoulder in the UV/vis/NIR absorption spectrum. Remarkably, the signatures of these defects are found in many diketopyrrolopyrrole (DPP)-based copolymers reported in the literature.

Polymer solar cells with diketopyrrolopyrrole conjugated polymers as the electron donor and electron acceptor.

A new class of diketopyrrolopyrrole conjugated acceptor polymer incorporating thiazoles with low-lying energy levels, high electron mobility, and broad absorption to the near infrared region provides a power conversion efficiency of 2.9% in solar cells with a second diketopyrrolo-pyrrole polymer as the donor.