The Efficiency of Polyester-Polysulfone Membranes, Coated with Crosslinked PVA Layers, in the Water Desalination by Pervaporation.

Composite polymer membranes were obtained using the so-called dry phase inversion and were used for desalination of diluted saline water solutions by pervaporation (PV) method. The tests used a two-layer backing, porous, ultrafiltration commercial membrane (PS20), which consisted of a supporting polyester layer and an active polysulfone layer. The active layer of PV membranes was obtained in an aqueous environment, in the presence of a surfactant, by cross-linking a 5 wt.

Assessment of Potential Use of a Composite Based on Polyester Textile Waste as Packing Elements of a Trickle Bed Bioreactor.

Biological wastewater treatment using trickle bed reactors is a commonly known and used solution. One of the key elements of the proper operation of the trickle bed bioreactor is the appropriate selection of biofilm support elements. The respective properties of the bioreactor packing media used can influence, among other things, the efficiency of the treatment process.

Biochemical Approach to Poly(Lactide)-Copper Composite-Impact on Blood Coagulation Processes.

The paper presents the investigation of the biological properties of Poly(Lactide)-Copper composite material obtained by sputter deposition of copper onto Poly(lactide) melt-blown nonwoven fabrics. The functionalized composite material was subjected to microbial activity tests against colonies of Gram-positive (), Gram-negative (, ) bacteria, and fungal mold species and biochemical-hematological tests including the evaluation of the Activated Partial Thromboplastin Time, Prothrombin Time, Thrombin Time and electron microscopy fibrin network imaging. The substantial antimicrobial and antifungal activities of the Poly(Lactide)-Copper composite suggests potential applications as an antibacterial/antifungal material.

Impact of Polymer Membrane Properties on the Removal of Pharmaceuticals.

The influence of various factors on the removal efficiency of selected pharmaceuticals by membrane filtration was investigated. Several commercial polymer membranes were used for nanofiltration (NF) from various manufacturers. The studies were conducted for ibuprofen (IBF), amoxicillin (AMX), diclofenac (DCF), tetracycline (TRC), salicylic acid (SA) and acetylsalicylic acid (ASA).

Removal of Organic Compounds with an Amino Group during the Nanofiltration Process.

The research covered the process of nanofiltration of low molecular weight organic compounds in aqueous solution. The article presents the results of experiments on membrane filtration of compounds containing amino groups in the aromatic ring and comparing them with the results for compounds without amino groups. The research was carried out for several commercial polymer membranes: HL, TS40, TS80, DL from various manufacturers.

Photodegradation and ozonation of ibuprofen derivatives in the water environment: Kinetics approach and assessment of mineralization and biodegradability.

This article presents the results of studies on the degradation of ibuprofen transformation products: 1-hydroxyibuprofen (1OHIBF), 4-ethylbenzaldehyde (4EBA), 1-[4-(2-methylpropyl)phenyl]ethan-1-ol (MPPE) in water. To the best of our knowledge, this is the first paper where the ozonation and photodegradation (VIS and UV photolysis, degradation in HO/UV system, photosensitized oxidation) of 1OHIBF, 4EBA and MPPE are reported. The processes were performed in demineralized and natural river water.

Integration of nanofiltration and biological degradation of textile wastewater containing azo dye.

The anaerobic biological azo dyes reduction process was successfully applied to decolourization of the concentrates from the nanofiltration treatment of real textile effluents. The anaerobic phase was followed by aerobic oxidation aimed at the destruction of the aromatic amine released from azo dye. In the first experiment sequential batch reactor (SBR) combining both the anaerobic and aerobic phase in one unit was used.