Fatigue behavior of sintered, glazed and glass-infiltrated surfaces of 5Y-PSZ bonded plates.

This study evaluated the effect of different occlusal surface finishes (glaze and silica glass infiltration) on surface characteristics and fatigue behavior of partially stabilized zirconia (PSZ) plates adhesively bonded onto epoxy resin discs. PSZ disc specimens (n = 15; Katana blocks STML, Kuraray Noritake Dental) were produced (Ø = 10 mm; thickness = 1.2 mm) and allocated into 3 groups: As sintered (S), silica glass infiltration (SGI), and glaze application (G).

Antimicrobial and anti-endotoxin activity of N-acetylcysteine, calcium hydroxide and their combination against and lipopolysaccharides.

Background: The management of endodontic infections is a complex challenge, mainly due to the involvement of diverse microorganisms and their by-products. This study aimed to evaluate the efficacy of N-acetylcysteine (NAC), calcium hydroxide (Ca(OH)), and their combined application as intracanal medications in combating , , and lipopolysaccharides (LPS) from .

Methods: A total of 60 single-rooted human teeth were carefully selected and divided into six groups.

Mechanical and optical properties of a borosilicate glass used to improve the finishing of 3Y-TZP restorations.

Borosilicate glass was developed to enhance the mechanical behavior and smoothness of dental zirconia as an alternative to conventional glaze. This study assessed the mechanical and optical properties of 3 mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) coated with borosilicate glass or a commercial glaze fired for an extended period of time. Disc-shaped 3Y-TZP zirconia specimens (Zpex, Tosoh) were sintered at 1550°C for 2 hours.

Are Tooth and Ceramic Fractures Different Sides of the Same Coin? A Report of Two Clinical Cases.

Two clinical cases involving the fracture of a natural tooth and one of a ceramic crown are presented and discussed based on fractography principles. In the first case, a patient reported intense pain in a sound third molar where a longitudinal fracture was identified, and the tooth was extracted. In the second case, a posterior rehabilitation using a lithium silicate ceramic crown was carried out, and the patient returned after 1 year with a fractured piece of the crown.

Influence of the postpolymerization type and time on the flexural strength and dimensional stability of 3D printed interim resins.

Statement Of Problem: The mechanical strength of 3-dimensionally (3D) printed interim resins is unclear but influenced by printing parameters. Evidence regarding standardization of the postpolymerization type and time for 3D printed interim resins is sparse.

Purpose: The purpose of this in vitro study was to evaluate the influence of postpolymerization type and time on flexural strength and dimensional stability of 3D printed resins for interim restorations.

Interface adhesion on layered zirconia: Effects of the veneering ceramic material and veneering technique.

Purpose: To evaluate the effect of different veneering ceramics and veneering techniques on the bond strength to zirconia.

Materials And Methods: 3Y-TZP zirconia blocks were sliced into 60 slabs, polished, and sintered. Each slab received one ceramic cylinder (Ø = 3.

Polishing the bonding surface, before or after crystallization, does not alter the fatigue behavior of bonded CAD-CAM lithium disilicate.

The aim of this study was to assess if the finishing/polishing of the bonding surface of lithium disilicate ceramic, prior to or after crystallization, would affect the fatigue behavior of a bonded restorations. For this, lithium disilicate ceramic (IPS e.max CAD) discs (n = 15) were milled and randomly divided into 3 groups: CAD-CAM group which remained untouched; PRE group which received a finishing/polishing protocol (OptraFine system) prior to its crystallization; and POST group, which received the treatment after its crystallization.

CAD-FEA modeling and fracture resistance of bilayer zirconia crowns manufactured by the rapid layer technology.

In the RLT (Rapid Layer Technology), veneering ceramic and framework are fabricated by computer-aided design/computer-aided manufacturing (CAD/CAM) and then cemented to obtain the restoration. This study aimed to evaluate the effect of the thickness of veneering ceramic manufactured by the RLT technique on the fracture resistance (FR) of bilayer crowns with zirconia frameworks. Twenty zirconia frameworks and twenty feldspathic posterior crowns with two different veneering ceramic occlusal thicknesses (1mm=TF1; 2mm=TF2) were manufactured using CAD/CAM system.

Influence of Zingiber officinale Extract on Push-Out Bond Strength of Glass-Fiber Post.

The aim of this study was to evaluate in vitro the influence of 20% glycolic ginger extract on the bond strength of glass-fiber post cemented with etch-and-rinse or self-etching resin cement. Forty-eight bovine roots were standardized (17±0.5 mm) and randomly divided into two groups, according to irrigant used during biomechanical preparation: NaOCl: 1% sodium hypochlorite and GEN: 20% glycolic ginger extract.