Eco(geno)toxicity of the new commercial insecticide Platinum Neo, a mixture of the neonicotinoid thiamethoxam and the pyrethroid lambda-cyhalothrin.

New mixtures of pesticides are being placed on the market to increase the spectrum of phytosanitary action. Thus, the eco(geno)toxic effects of the new commercial mixture named Platinum Neo, as well as its constituents the neonicotinoid Thiamethoxam and the pyrethroid Lambda-Cyhalothrin, were investigated using the species Daphnia magna, Raphidocelis subcapitata, Danio rerio, and Allium cepa L. The lowest- and no-observed effect concentration (LOEC and NOEC) were measured in ecotoxicological tests.

Degradation of cytostatics methotrexate and cytarabine through physico-chemical and advanced oxidative processes: influence of pH and combined processes on the treatment efficiency.

Environmental release of wastewater that contains cytostatic drugs can cause genotoxic impact, since these drugs act directly on the genetic material of aquatic organisms. Thus, the aim of this study was to evaluate the removal of the cytostatic drugs cytarabine (CTR) and methotrexate (MTX) using different physico-chemical methods individually (i.e.

Using photocatalyzed-peroxonization to disinfect and denature genetic material of bacterial plasmids present in hospital wastewater.

The literature reports the presence of multiresistant microorganisms in wastewater discharged from municipal and hospital wastewater treatment plants (WWTPs). This has led to questions concerning the disinfection efficiency of the treatments applied. Thus, this study aimed to assess the efficiency of different chemical oxidation methods to disinfect and to degrade bacterial plasmids present in hospital wastewaters, to avoid the dispersion of antibiotic resistance genes in the environment.

Swine slaughterhouse biowaste: an environmental sustainability assessment of composting, amended soil quality, and phytotoxicity.

In this article, the environmental sustainability of a circular economy concept applied to the management of biowaste was studied. To achieve this goal, the composting performance, compost-amended soil health, and phytotoxicity were assessed in the case of management of solid waste from a small swine slaughterhouse. Microorganisms present in a similar composting process were used as inoculums to improve the efficiency of composting.

Antibiotic degradation and mineralization: efficiency increase on combining different chemical treatment processes.

The goal of this study was to assess the efficiency of antibiotic degradation applying different chemical treatment methods and their combinations. Thus, improvement in the efficiency of these methods when combined was quantified. The methods tested to degrade/mineralize the antibiotics amoxicillin (AMX) and ciprofloxacin (CIP) under different pH conditions (4, 7 and 10) were ultra-violet irradiation (UV, ultrasound (US), hydrogen peroxide (HO) and ozone (O) alone and in combination.

Development of a low-cost inoculum to improve composting of cattle slaughterhouse by-products.

The composting process is an option for acceptable environmental management of cattle slaughterhouse by-products. The goals of this article were (i) to make a low-cost inoculum using popular supermarket ingredients and microorganisms that are already present in the composting environment, and (ii) to compare the efficiency of the composting process with and without the application of formulated inoculum. Initially, a consortium of microorganisms already present in the composting environment (, and ) was prepared in a low-cost culture medium for use as an inoculum for the composting process.

Urban afforestation: using phytotoxicity endpoints to compare air pollution tolerance of two native Brazilian plants Aroeira (Schinus terebinthifolius) and Cuvatã (Cupania vernalis).

Urban afforestation can mitigate the effects of air pollution, but the suitability of plant species for this purpose needs to be determined according to pollution intensity and climate change. The goal of this study was to evaluate the sensitivity of different phytotoxicity endpoints using two native Brazilian plant species as models, Aroeira (Schinus terebinthifolius) and Cuvatã (Cupania vernalis). The sensitivity parameters evaluated could help in selecting the most air-pollution-tolerant plant species for use in urban afforestation programs.

Degradation of recalcitrant textile azo-dyes by fenton-based process followed by biochar polishing.

The use of advanced oxidative processes (AOPs) is an efficient alternative for the treatment of textile wastewaters. The aim of this study was to assess the dye removal efficiency of a Fenton-based degradation process followed by a polishing step using biochar prepared from rice husk. Six recalcitrant textile dyes - Reactive Red 195 (D1), Synolon Brown S2 (D2), Orange Remazol RGB (D3), Yellow Synozol K3 (D4), Reactive Orange (D5), and Reactive Black 5 (D6) - were treated with Fenton and photo-Fenton processes (with and without biochar polishing) under optimized conditions.

Assessment of phytotoxicity and impact on the enzymatic activity of soil microorganisms caused by veterinary antibiotics used in Brazilian farms.

This work aimed to evaluate the impact of veterinary antibiotics on biomass phytoproductivity and soil enzyme activity. The soil was sampled in the city of Camboriú (state of SC, Brazil). The soil enzyme activity was assessed through hydrolysis of fluorescein diacetate (FDA), while phytotoxicity was tested using (lettuce).

Using textile industrial sludge, sewage wastewater, and sewage sludge as inoculum to degrade recalcitrant textile dyes in a co-composting process: an assessment of biodegradation efficiency and compost phytotoxicity.

Recalcitrant dyes found in textile wastewater represent a threat for sustainable textile production due to their resistance to conventional treatments. This study assessed an alternative co-composting system for the treatment of recalcitrant textile dyes where textile industrial sludge, sewage wastewater, or sewage sludge were used as microbial compost inocula. The biodegradation efficiency of bioreactor trials and compost quality of the co-composting system were assessed by visible spectrophotometry and by a phytotoxicity test.

Petroleum-contaminated soil: using sonolysis to improve mineralization and biodegradation potential of Fenton reaction and ozonolysis process.

The degradation efficiency of the Fenton reaction or ozonolysis (O) to treat soil contaminated by crude petroleum was studied in association with the sonolysis process. To quantify oxidation efficiency, total organic carbon (TOC) and chemical oxygen demand (COD) were measured, while biochemical oxygen demand (BOD) was measured to estimate biodegradation potential. TOC removal efficiency ranged from 9 to 52% to the Fenton reaction without sonolysis, and 18% and 78% with sonolysis for reagent concentrations of 1% HO-100 mM Fe and 20% HO-1 mM Fe, respectively.

A 3D ecotoxi-topological profile: Using concentration-time-response surfaces to show peroxidase activity in Zea mays (L.) exposed to aluminium or arsenic in hydroponic conditions.

This study sought to use concentration-time-response surfaces to show the effects of exposure to toxic (semi-)metals on peroxidase activity in higher plants as a function of exposure-concentration and exposure-time. Maize (Zea mays L.) seedlings (i.

Remediation efficiency of different methods for rapid-response of microbiological and/or organic matter contaminated beach sand: A laboratory study.

In this article we compare the efficiency of different methods of rapid-response remediation of beach sand contaminated with microbiological and/or organic matter. Contaminated beach sands were treated in laboratory by different treatment methods (i.e.

Comparing different methods for fast screening of microbiological quality of beach sand aimed at rapid-response remediation.

There is scientific evidence that beach sands are a significant contributor to the pathogen load to which visitors are exposed. To develop beach quality guidelines all beach zones must be included in microbiological evaluations, but monitoring methods for beach sand quality are relatively longstanding, expensive, laborious and require moderate laboratory infrastructure. This paper aimed to evaluate the microorganism activity in different beach zones applying and comparing a classical method of membrane filtration (MF) with two colorimetric screening methods based on fluorescein (FDA) and tetrazolium (TTC) salt biotransformation to evaluate a new rapid and low-cost method for beach sand microbiological contamination assessments.

Ecotoxicity assessment of particulate matter emitted from heavy-duty diesel-powered vehicles: influence of leaching conditions.

Concerns regarding the environmental impact of diesel exhaust particulate matter (DPM) have increased in recent years. Following emission to the atmosphere, these fine materials can sorb many contaminants at their surface, which can subsequently be released, for instance, due to physicochemical environmental changes. The desorption of contaminants from particulate matter will increase the environmental pollution and can promote ecotoxicological effects.

Restoration of areas degraded by alluvial sand mining: use of soil microbiological activity and plant biomass growth to assess evolution of restored riparian vegetation.

River or alluvial sand mining is causing a variety of environmental problems in the Itajaí-açú river basin in Santa Catarina State (south of Brazil). When this type of commercial activity degrades areas around rivers, environmental restoration programs need to be executed. In this context, the aim of this study was to assess the evolution of a restored riparian forest based on data on the soil microbial activity and plant biomass growth.

Aquatic ecotoxicity assessment of a new natural formicide.

Background, Aim And Scope: Agrochemicals could reach aquatic ecosystems and damage ecosystem functionality. Natural formicide could be an alternative to use in comparison with the more toxic formicides available on the market. Thus, the objective of this study was to assess the ecotoxicity of the new natural formicide Macex® with a battery of classical aquatic ecotoxicity tests.

Incorporation of gypsum waste in ceramic block production: Proposal for a minimal battery of tests to evaluate technical and environmental viability of this recycling process.

Civil engineering-related construction and demolition debris is an important source of waste disposed of in municipal solid waste landfills. After clay materials, gypsum waste is the second largest contributor to the residential construction waste stream. As demand for sustainable building practices grows, interest in recovering gypsum waste from construction and demolition debris is increasing, but there is a lack of standardized tests to evaluate the technical and environmental viability of this solid waste recycling process.

Genotoxicity potential of a new natural formicide.

Background, Aim, And Scope: Assessment of environmental impacts from pesticide utilization should include genotoxicity studies, where the possible effects of mutagenic/genotoxic substances on individuals are assessed. In this study, the genotoxicity profile of the new formicide Macex® was evaluated with two genotoxicity tests, namely, the micronucleus test with mouse bone marrow and Vicia faba, and a mutagenicity test using the Ames Salmonella assay.

Materials And Methods: The bacterial reverse mutation test (Salmonella typhimurium strains TA97, TA98, TA100, TA102, and TA1535), the Vicia root tip and mouse micronucleus tests were conducted according to published protocols.

Environmental impact of industrial sludge stabilization/solidification products: chemical or ecotoxicological hazard evaluation?

Nowadays, the classification of industrial solid wastes is not based on risk analysis, thus the aim of this study was to compare the toxicity classifications based on the chemical and ecotoxicological characterization of four industrial sludges submitted to a two-step stabilization/solidification (S/S) processes. To classify S/S products as hazardous or non-hazardous, values cited in Brazilian chemical waste regulations were adopted and compared to the results obtained with a battery of biotests (bacteria, alga and daphnids) which were carried out with soluble and leaching fractions. In some cases the hazardous potential of industrial sludge was underestimated, since the S/S products obtained from the metal-mechanics and automotive sludges were chemically classified as non-hazardous (but non-inert) when the ecotoxicity tests showed toxicity values for leaching and soluble fractions.