Refinement of the Slug Mucosal Irritation test as an alternative screening test for eye irritation.

The objective of this study was to limit the test procedure time of the Slug Mucosal Irritation test to one day and to determine whether it is a relevant and reliable method to predict the eye irritation potential of chemicals. The irritation potential of several eye reference chemicals can be estimated by the amount of mucus produced when tested at a 1% concentration (60 min). Since some in vivo irritating chemicals did not influence this endpoint the effect of increasing concentrations on membrane damage was investigated.

Evaluation of extrusion/spheronisation, layering and compaction for the preparation of an oral, multi-particulate formulation of viable, hIL-10 producing Lactococcus lactis.

Three formulation techniques were compared in order to develop a multi-particulate formulation of viable, interleukin-10 producing Lactococcus lactis Thy12. First, freeze-dried L. lactis was compacted into mini-tablets.

Development and validation of a direct, non-destructive quantitative method for medroxyprogesterone acetate in a pharmaceutical suspension using FT-Raman spectroscopy.

A simple linear regression method was developed and statistically validated for the direct and non-destructive quantitative analysis--without sample preparation--of the active pharmaceutical ingredient (API) medroxyprogesterone acetate (MPA) in an aqueous pharmaceutical suspension (150 mg in 1.0 ml) using FT-Raman spectroscopy. The linear regression was modelled by plotting the highest peak intensity of the vector normalized spectral band between 1630 and 1590 cm-1 against different MPA standard suspension concentrations.

Ocular bioerodible minitablets as strategy for the management of microbial keratitis.

Purpose: Evaluation in volunteers of ciprofloxacin-containing ocular gelling minitablets with prolonged release properties.

Methods: The irritation potential of ciprofloxacin-containing bioadhesive powder mixtures, used to prepare ocular bioerodible minitablets, was evaluated with a slug mucosal-irritation test. The tear pharmacokinetic profiles of ciprofloxacin were determined in six healthy volunteers after topical administration of a minitablet and a single eye drop in the lower fornix.

Effect of different sterilisation methods on the properties of bioadhesive powders and ocular minitablets, and clinical evaluation.

The purpose of this study was to evaluate the influence of gamma-irradiation and dry heat sterilisation on the properties of a bioadhesive powder mixture containing ciprofloxacin and its corresponding ocular minitablets. The molecular weight characteristics of drum dried waxy maize starch (DDWM), employed as major component of the bioadhesive formulation, the decay kinetics of radicals, the rheological properties of the bioadhesive polymers and the microbial activity of ciprofloxacin were studied. The influence of the different sterilisation methods on the characteristics of the ocular minitablets was investigated by measuring the crushing strength, the friability, and the in vitro release of ciprofloxacin from the minitablets.

Extrusion granulation and high shear granulation of different grades of lactose and highly dosed drugs: a comparative study.

Formulations containing different lactose grades, paracetamol, and cimetidine were granulated by extrusion granulation and high shear granulation. Granules were evaluated for yield, friability, and compressibility. Tablets were prepared from those granules and evaluated for tensile strength, friability, disintegration time, and dissolution.

The quality of essential antimicrobial and antimalarial drugs marketed in Rwanda and Tanzania: influence of tropical storage conditions on in vitro dissolution.

Objective: The quality of 33 formulations of essential antimicrobial and antimalarial drugs (amoxicillin capsules, metronidazole tablets, sulfamethoxazole/trimethoprim tablets, quinine tablets and sulphadoxine/pyrimethamine tablets) marketed in Rwanda and Tanzania was assessed and the influence of tropical storage conditions on potency and in vitro dissolution investigated.

Methods: Drug content and in vitro dissolution were determined immediately after purchase and during 6-month storage under simulated tropical conditions (75% relative humidity, 40 degrees C) using the methods described in the USP 24 monographs on the drugs concerned.

Results And Discussion: At the time of purchase, the drug content of all the formulations was within the limits recommended by the USP 24, but after 6-month storage, the drug content of one sulfamethoxazole/trimethoprim and one quinine formulation were found to be substandard.

Single-step granulation/tabletting of different grades of lactose: a comparison with high shear granulation and compression.

The influence of the particle size, particle morphology and crystallinity of lactose on the extrusion properties and on the quality of tablets were investigated using single-step granulation/tabletting as a tabletting technique. Results showed that particle size and type of lactose (alpha-lactose monohydrate, anhydrous beta-lactose and spray dried lactose) affected the powder feeding, the process performance as well as the process capacity. Different grades of lactose yielded tablets with similar tensile strength, but significantly different disintegration time.

Compaction of enteric-coated pellets: influence of formulation and process parameters on tablet properties and in vivo evaluation.

The aim of this study was to investigate the influence of formulation and compression parameters on the properties of tablets, containing enteric-coated pellets, and on the integrity of the enteric polymer of the individual pellets after compression. In addition the piroxicam plasma concentrations were determined after single and multiple oral administration of powder, pellet and tablet formulations at a dose of 0.3 mg piroxicam/kg bodyweight to dogs.

Influence of the punch diameter and curvature on the yield pressure of MCC-compacts during Heckel analysis.

The volume reduction behaviour of powders has been quantified by means of the 'in-die' yield pressure (YP) using Heckel analysis. However, because different YPs are reported for the same material, the experimental conditions influencing this material-constant were investigated. Silicified microcrystalline cellulose was compressed into flat-faced and convex tablets using a compaction simulator instrumented with load and displacement transducers.

Bioavailability of ibuprofen from hot-melt extruded mini-matrices.

The bioavailability of ibuprofen from hot-melt extruded mini-matrices based on ethyl cellulose and a hydrophilic excipient was tested. During the in vivo evaluation an oral dose of 300 mg ibuprofen was administered to healthy volunteers (n = 9) in a randomized cross-over study and compared with a commercially available sustained release product (Ibu-slow). The plasma samples were analysed by a validated HPLC-UV method.

In vitro and in vivo evaluation of a matrix-in-cylinder system for sustained drug delivery.

A matrix-in-cylinder system for sustained drug delivery, consisting of a hot-melt extruded ethylcellulose (EC) pipe surrounding a drug containing HPMC-Gelucire 44/14 core, was evaluated in vitro and in vivo. In an aqueous medium, the HPMC-Gelucire core forms a gel plug, which releases the drug-through the open ends of the EC pipe--by means of erosion. The influence of hydrodynamic and mechanical stress and the effect of different 'physiologically relevant' dissolution media on the in vitro drug release were investigated.

Effect of ibuprofen on coccidiosis in broiler chickens.

Ibuprofen (IBU)-a nonsteroidal anti-inflammatory drug-inhibits the biosynthesis of prostaglandins with pro-inflammatory and immunosuppressive properties and is therefore proposed as a candidate molecule for the treatment of coccidiosis in broiler chickens. In all experiments, IBU was administered via drinking water. In a first experiment, chickens were infected at 10 or 21 days of age with oocysts of Eimeria acervulina (5 X 10(4)), Eimeria maxima (3 X 10(4)), and Eimeria tenella (7.

Alternative method for enteric coating of HPMC capsules resulting in ready-to-use enteric-coated capsules.

The aim of this study was to develop an alternative method for enteric coating of HPMC capsules that avoids the sealing step before coating, resulting in ready-to-use enteric-coated capsules for the use in retail or hospital pharmacy or R&D sections of pharmaceutical industry and for the production of enteric-coated heat and moisture sensitive biomaterials. HPMC caps and bodies 00 (Vcaps, Capsugel) were coated separately in a fluid bed apparatus prior to filling (GPCG-1, Glatt) with Eudragit L30D-55 or Eudragit FS 30 D (Röhm), Aqoat AS-HF (Shin-Etsu) and Sureteric (Colorcon), using an optimised coating process. The coated bodies were filled and closed with the coated caps without encountering problems of coating damage.

The evaluation of the local tolerance of vaginal formulations, with or without nonoxynol-9, using the slug mucosal irritation test.

Background: Frequent use of some vaginal formulations can induce mucosal irritation. Therefore, it is important to evaluate their vaginal tolerance.

Goal: The goal of this study was to optimize the mucosal irritation test using slugs for the evaluation of the local tolerance of vaginal gels and investigate the relevance of the test.

Twin screw granulation as a simple and efficient tool for continuous wet granulation.

The modification of a twin screw extruder for continuous wet granulation was investigated. Modification of the extruder setup as well as the screw design allowed the continuous wet granulation of alpha-lactose monohydrate without the need of a wet sieving step. The robustness of twin screw granulation was evaluated by studying the influence of processing parameters and formulation variables on the process performance and on the properties of alpha-lactose monohydrate granules and tablets.

In-line monitoring of a pharmaceutical blending process using FT-Raman spectroscopy.

FT-Raman spectroscopy (in combination with a fibre optic probe) was evaluated as an in-line tool to monitor a blending process of diltiazem hydrochloride pellets and paraffinic wax beads. The mean square of differences (MSD) between two consecutive spectra was used to identify the time required to obtain a homogeneous mixture. A traditional end-sampling thief probe was used to collect samples, followed by HPLC analysis to verify the Raman data.

Quantitative determination of p-aminosalicylic acid and its degradation product m-aminophenol in pellets by ion-pair high-performance liquid chromatography applying the monolithic Chromolith Speedrod RP-18e column.

An ion-pair high performance liquid chromatographic method was developed for the simultaneous determination of p-aminosalicylic acid (PAS) and its degradation product m-aminophenol (MAP) in a newly developed multiparticular drug delivery system. Owing to the concentration differences of PAS and MAP, acetanilide and sulfanilic acid were used as internal standards, respectively. The separation was performed on a Chromolith SpeedROD RP-18e column, a new packing material consisting of monolithic rods of highly porous silica.

Bioadhesive grafted starch copolymers as platforms for peroral drug delivery: a study of theophylline release.

Nonirritant bioadhesive drug release systems based on starch-acrylic acid graft copolymers prepared by radiation of starch and acrylic acid mixtures with (60)Co were developed for buccal application. The release rate of theophylline (TPL), used as a model drug, depended on the ratio of starch to acrylic acid and on the presence of cations in the graft copolymers, but was practically not affected by the pH (between pH 3 and 7) of the dissolution medium nor by the type of starch used (corn, rice, or potato). Possible release mechanisms are discussed for specific conditions.

Hot-melt extruded ethylcellulose cylinders containing a HPMC-Gelucire core for sustained drug delivery.

The objective of the study was to develop a sustained release system consisting of a hot-melt extruded ethylcellulose pipe surrounding a drug-containing hydroxypropyl methylcellulose (HPMC)-Gelucire 44/14 core, yielding a monolithic matrix system applicable in the domain of sustained drug release. The influence of HPMC substitution type and viscosity grade was investigated through dissolution testing and erosion studies. All sustained release systems showed a nearly constant drug release profile with only 40% of the drug released after 24 h.

Gastrointestinal transit time of nondisintegrating radio-opaque pellets in suckling and recently weaned piglets.

The objective was to determine the gastrointestinal (GI) transit times of pellets in piglets at different time points around weaning, as transit times are essential criteria to develop oral drug delivery systems. Nondisintegrating radio-opaque pellets were given orally in order to define the transit times by radiography. The radiographs were analysed with a software programme to calculate the number of pellets present in the different parts of the GI tract.

Enteric-coated pellets of F4 fimbriae for oral vaccination of suckling piglets against enterotoxigenic Escherichia coli infections.

To prevent enterotoxigenic Escherichia coli (ETEC) induced postweaning diarrhoea, the piglet needs an active mucosal immunity at the moment of weaning. In the present study, the feasibility of oral vaccination of suckling piglets against F4+ETEC infection with F4 fimbriae was studied. Furthermore, oral vaccination with enteric-coated pellets of F4 fimbriae was compared to vaccination with F4 fimbriae in solution.

Comparison of morphine and hydromorphone analysis on reversed phase columns with different diameters.

A comparison of a reversed phase high-performance liquid chromatographic (HPLC) method performed on columns with different internal diameters is reported for the quantitative routine determination of morphine.HCl and hydromorphone.HCl in solutions used for intramuscular injection.

Biological containment of genetically modified Lactococcus lactis for intestinal delivery of human interleukin 10.

Genetically modified Lactococcus lactis secreting interleukin 10 provides a therapeutic approach for inflammatory bowel disease. However, the release of such genetically modified organisms through clinical use raises safety concerns. In an effort to address this problem, we replaced the thymidylate synthase gene thyA of L.

Rheological study on mucoadhesivity of some nasal powder formulations.

Various powder mixtures were used to administer insulin via the nasal route: a co-spray dried mixture of Amioca starch and Carbopol 974 P (1/3), drum dried waxy maize starch and Carbopol 974 P (9/1), maltodextrin DE38/Carbopol 974 P (9/1) and pure drum dried waxy maize starch. Oscillatory rheology is performed to study and compare the viscosity, elasticity and mucoadhesivity of these powder formulations. There was no rheological synergism detectable with the co-spray dried mixture of Amioca starch and Carbopol 974 P (1/3), drum dried waxy maize starch and Carbopol 974 P (9/1) and maltodextrin DE38/Carbopol 974 P (9/1).