Perspectives on Using Alder, Larch, and Birch Wood Species to Maintain the Increasing Particleboard Production Flow.

Particleboard, engineered wood products as part of a large family of wood composite materials, developed in use mainly in the 1950s and 1960s to utilize inferior wood and wood waste when good-quality wood was in short supply; the annual production capacity worldwide is over 100 million m. It is also necessary to have a lot of wood raw material for its production, although raw material resources are limited on our planet. In addition to the main wood species, it is therefore possible to think about the wider use of alternative, lesser-known European species of alder, larch, and birch in particleboard production.

Molded Plywood with Proportions of Beech Bark in Adhesive Mixtures: Production on an Industrial Scale.

Molded plywood is used for furniture components such as seats, backrests, or integral seat shells, and it must be durable and harmless to health. Molded plywood is made with urea-formaldehyde (UF) adhesives; therefore, the issue of the fillers used in them is important. The potential of using ground beech ( L.

Latest Advancements in the Development of High-Performance Lignin- and Tannin-Based Non-Isocyanate Polyurethane Adhesive for Wood Composites.

The depletion of natural resources and increasing environmental apprehension regarding the reduction of harmful isocyanates employed in manufacturing polyurethanes (PUs) have generated significant attention from both industrial and academic sectors. This attention is focused on advancing bio-based non-isocyanate polyurethane (NIPU) resins as viable and sustainable substitutes, possessing satisfactory properties. This review presents a comprehensive analysis of the progress made in developing bio-based NIPU polymers for wood adhesive applications.

New Challenges in Wood and Wood-Based Materials II.

Wood is a natural material that is available in large quantities and is easy to produce, making it the perfect material to consider for the circular economy [...

Rapid synaptic and gamma rhythm signature of mouse critical period plasticity.

Early-life experience enduringly sculpts thalamocortical (TC) axons and sensory processing. Here, we identify the very first synaptic targets that initiate critical period plasticity, heralded by altered cortical oscillations. Monocular deprivation (MD) acutely induced a transient (<3 h) peak in EEG γ-power (~40 Hz) specifically within the visual cortex, but only when the critical period was open (juvenile mice or adults after dark-rearing, -deletion, or diazepam-rescued GAD65-deficiency).

Advanced Eco-Friendly Wood-Based Composites.

In collaboration with the MDPI publishing house, we are pleased to introduce the reader to our new project, the Special Issue entitled "Advanced Eco-friendly Wood-Based Composites" [...

Fire Resistance Evaluation of New Wooden Composites Containing Waste Rubber from Automobiles.

Particleboards containing waste rubber (tires and mixtures of isolators and carpets) filler were evaluated from the point of view of its flammability. The assessment of the utilization of these composites in the construction industry was analyzed through the determination of their spontaneous ignition temperatures, mass burning rate and calorific value. Based on the results of spontaneous ignition temperatures, similar values between particleboards and particleboards containing 10%, 15% and 20% of waste tires were obtained.

A practical guide to applying machine learning to infant EEG data.

Electroencephalography (EEG) has been widely adopted by the developmental cognitive neuroscience community, but the application of machine learning (ML) in this domain lags behind adult EEG studies. Applying ML to infant data is particularly challenging due to the low number of trials, low signal-to-noise ratio, high inter-subject variability, and high inter-trial variability. Here, we provide a step-by-step tutorial on how to apply ML to classify cognitive states in infants.

Properties of Eco-Friendly Particleboards Bonded with Lignosulfonate-Urea-Formaldehyde Adhesives and pMDI as a Crosslinker.

The purpose of this study was to evaluate the feasibility of using magnesium and sodium lignosulfonates (LS) in the production of particleboards, used pure and in mixtures with urea-formaldehyde (UF) resin. Polymeric 4,4'-diphenylmethane diisocyanate (pMDI) was used as a crosslinker. In order to evaluate the effect of gradual replacement of UF by magnesium lignosulfonate (MgLS) or sodium lignosulfonate (NaLS) on the physical and mechanical properties, boards were manufactured in the laboratory with LS content varying from 0% to 100%.

Properties of High-Density Fiberboard Bonded with Urea-Formaldehyde Resin and Ammonium Lignosulfonate as a Bio-Based Additive.

The potential of ammonium lignosulfonate (ALS) as an eco-friendly additive to urea-formaldehyde (UF) resin for manufacturing high-density fiberboard (HDF) panels with acceptable properties and low free formaldehyde emission was investigated in this work. The HDF panels were manufactured in the laboratory with very low UF resin content (4%) and ALS addition levels varying from 4% to 8% based on the mass of the dry wood fibers. The press factor applied was 15 s·mm.

New Challenges in Wood and Wood-Based Materials.

Wood and wood-based composites are key engineering materials that can be successfully designed and manufactured with predetermined exploitation properties, making them suitable for a wide range of applications and end uses [...

Thermophysical Properties of Larch Bark Composite Panels.

The effects of using 100% larch bark ( Mill) as a raw material for composite boards on the thermophysical properties of this innovative material were investigated in this study. Panels made of larch bark with 4-11 mm and 10-30 mm particle size, with ground bark oriented parallel and perpendicular to the panel's plane at densities varying from 350 to 700 kg/m and bonded with urea-formaldehyde adhesive were analyzed for thermal conductivity, thermal resistivity and specific heat capacity. It was determined that there was a highly significant influence of bulk density on the thermal conductivity of all the panels.

Distributional learning of speech sound categories is gated by sensitive periods.

Perceptual attunement to the native phonetic repertoire occurs over the first year of life: an infant's discrimination of non-native phonetic contrasts declines while their discrimination of native phonetic contrasts improves, with the timing of change consistent with sensitive periods. The statistics of speech sound distributions is one source of input used to collapse non-native phonetic category boundaries, while sharpening native ones. Distributional learning can be a domain-general mechanism, yet given the timing of perceptual attunement, we hypothesized that this learning mechanism may be maturationally delimited in the content domain of phonetic categories.

Eco-Friendly Fiberboard Panels from Recycled Fibers Bonded with Calcium Lignosulfonate.

The potential of using residual softwood fibers from the pulp and paper industry for producing eco-friendly, zero-formaldehyde fiberboard panels, bonded with calcium lignosulfonate (CLS) as a lignin-based, formaldehyde free adhesive, was investigated in this work. Fiberboard panels were manufactured in the laboratory by applying CLS addition content ranging from 8% to 14% (on the dry fibers). The physical and mechanical properties of the developed composites, i.

Utilization of Birch Bark as an Eco-Friendly Filler in Urea-Formaldehyde Adhesives for Plywood Manufacturing.

The potential of using ground birch ( Ehrh.) bark as an eco-friendly additive in urea-formaldehyde (UF) adhesives for plywood manufacturing was investigated in this work. Five-ply plywood panels were fabricated in the laboratory from beech ( L.

Eco-Friendly, High-Density Fiberboards Bonded with Urea-Formaldehyde and Ammonium Lignosulfonate.

The potential of producing eco-friendly, formaldehyde-free, high-density fiberboard (HDF) panels from hardwood fibers bonded with urea-formaldehyde (UF) resin and a novel ammonium lignosulfonate (ALS) is investigated in this paper. HDF panels were fabricated in the laboratory by applying a very low UF gluing factor (3%) and ALS content varying from 6% to 10% (based on the dry fibers). The physical and mechanical properties of the fiberboards, such as water absorption (WA), thickness swelling (TS), modulus of elasticity (MOE), bending strength (MOR), internal bond strength (IB), as well as formaldehyde content, were determined in accordance with the corresponding European standards.

Warped rhythms: Epileptic activity during critical periods disrupts the development of neural networks for human communication.

It is well established that temporal lobe epilepsy-the most common and well-studied form of epilepsy-can impair communication by disrupting social-emotional and language functions. In pediatric epilepsy, where seizures co-occur with the development of critical brain networks, age of onset matters: The earlier in life seizures begin, the worse the disruption in network establishment, resulting in academic hardship and social isolation. Yet, little is known about the processes by which epileptic activity disrupts developing human brain networks.

Critical period regulation across multiple timescales.

Brain plasticity is dynamically regulated across the life span, peaking during windows of early life. Typically assessed in the physiological range of milliseconds (real time), these trajectories are also influenced on the longer timescales of developmental time (nurture) and evolutionary time (nature), which shape neural architectures that support plasticity. Properly sequenced critical periods of circuit refinement build up complex cognitive functions, such as language, from more primary modalities.

Sound-Absorption Coefficient of Bark-Based Insulation Panels.

The objective of this study was to investigate the sound absorption coefficient of bark-based insulation panels made of softwood barks Spruce ( (L.) H. Karst.

Occupational Exposure to Dust Produced when Milling Thermally Modified Wood.

During production, thermally modified wood is processed using the same machining operations as unmodified wood. Machining wood is always accompanied with the creation of dust particles. The smaller they become, the more hazardous they are.

Analysis of Larch-Bark Capacity for Formaldehyde Removal in Wood Adhesives.

Ecofriendly wood-based materials are required by consumers at present. Decorative panels are part of a large group of wood-composite materials, and their environmental properties must not be neglected. More environmentally friendly decorative panels can be achieved by various methods.

Can Monitoring Training Load Deter Performance Drop-off During Off-season Training in Division III American Football Players?

Kildow, AR, Wright, G, Reh, RM, Jaime, S, and Doberstein, S. Can monitoring training load deter performance drop-off during off-season training in Division III American football players? J Strength Cond Res 33(7): 1745-1754, 2019-The primary aim of this observational investigation was to monitor performance of Division III American football players during off-season training while the secondary aim was to investigate differences in training adaptations between linemen and nonline players. Twenty-three subjects from the university's football team were recruited from an Exercise Science 100 conditioning class to participate in a 15-week off-season training program.

Functionality of Beech Bark in Adhesive Mixtures Used in Plywood and Its Effect on the Stability Associated with Material Systems.

The results of research into utilizing grinded beech bark in order to substitute commonly used fillers in urea formaldehyde (UF) adhesive mixtures to bond plywood are presented in the present study. Four test groups of plywood with various adhesive mixtures were manufactured under laboratory conditions and used for experimentation. Plywood made using the same technology, with the common filler (technical flour), was used as a reference material.

Evaluation and application of organic micro-pollutants (OMPs) as indicators in karst system characterization.

This study presents chances and challenges associated with the application of organic micro-pollutants (OMPs) as indicators in karst system characterization. The methodology and options of possible indications were evaluated based on the interpretation of the spatial distribution of 54 compounds in groundwater in combination with a complex geological setting consisting of multiple aquifer horizons and tectonic faults. A high variety of OMPs are released mainly in an urban area leading to concentrations of several nanograms per liter up to micrograms per liter, which are detectable using a high-performance liquid chromatography with subsequent tandem mass spectrometry (HPLC-MS/MS) method.

Occurrence and spatial distribution of organic micro-pollutants in a complex hydrogeological karst system during low flow and high flow periods, results of a two-year study.

Fifty-four different organic micro-pollutants (OMPs) including pharmaceuticals, pesticides, corrosion inhibitors and other typical wastewater compounds such as caffeine are repeatedly analyzed in approximately fifty groundwater observation points in a complex faulted and fractured carbonate aquifer system consisting of three spring catchment areas. With the applied HPLC-MS/MS method, achieving method quantification limits (MQL) of 1.2-28 ng L(-1), forty-four of the OMPs are detected in groundwater.