Toxic inhalation of sodium metabisulphite by-products from a shipping container.

Logistics workers who handle cargo containers are at risk of toxic inhalation injuries, although prevalence and severities of these injuries are not well characterized. We report on a previously healthy 37-year-old supervisor who was acutely exposed to sodium metabisulphite and its thermal degradation by-products during a routine inspection of a shipping container. The employee developed chemical pneumonitis with acute non-cardiogenic pulmonary oedema and subsequent severe reactive airway dysfunction syndrome.

Wildfire, Smoke Exposure, Human Health, and Environmental Justice Need to be Integrated into Forest Restoration and Management.

Purpose Of Review: Increasing wildfire size and severity across the western United States has created an environmental and social crisis that must be approached from a transdisciplinary perspective. Climate change and more than a century of fire exclusion and wildfire suppression have led to contemporary wildfires with more severe environmental impacts and human smoke exposure. Wildfires increase smoke exposure for broad swaths of the US population, though outdoor workers and socially disadvantaged groups with limited adaptive capacity can be disproportionally exposed.

Surveillance of work-related asthma including the emergence of a cannabis-associated case series in Washington State.

Objective: We conducted surveillance for work-related asthma (WRA) in Washington State to identify the industry sectors and asthma exposures most commonly affecting injured workers and in need of prevention activities.

Methods: Using workers' compensation data as the primary data source, valid cases were classified as work-aggravated asthma (WAA) or new onset asthma that includes occupational asthma (OA) and reactive airways dysfunction syndrome (RADS). The source of exposure that caused the worker's asthma, their industry and occupation were determined.

Severe Silicosis in Engineered Stone Fabrication Workers - California, Colorado, Texas, and Washington, 2017-2019.

Silicosis is an incurable occupational lung disease caused by inhaling particles of respirable crystalline silica. These particles trigger inflammation and fibrosis in the lungs, leading to progressive, irreversible, and potentially disabling disease. Silica exposure is also associated with increased risk for lung infection (notably, tuberculosis), lung cancer, emphysema, autoimmune diseases, and kidney disease (1).

Work-related asthma surveillance in Washington State: time trends, industry rates, and workers' compensation costs, 2002-2016.

Washington State's work-related asthma (WRA) surveillance program utilizes workers' compensation (WC) data as its primary data source and has spanned a 15-year time period. This study analyses trends for WRA claim incidence rates compared to all WC claim incidence rates. WRA claim incidence rates and WC costs are analyzed by industry.

Isocyanate Exposure Below Analytical Detection When a Paint Brush and Roller Are Used to Apply Moisture-Cure Polyurethane Paint.

Isocyanate exposure is known to be hazardous when polyurethane paints are applied with a spray gun, but less is known of exposure when paint is applied with a paint brush and roller. Concentrations of 1,6-hexamethylene diisocyanate (HDI) monomer and three HDI polymers were assessed when two moisture-cure polyurethane paints containing 31-35% isocyanates were applied with a paint roller and brush. Short-term 15-min samples were taken during paint application in an indoor test environment with no ventilation (n= 12); in an outdoor test environment (n= 11); and in an outdoor in-situ assessment (n= 22).

Occupational Hydrofluoric Acid Injury from Car and Truck Washing--Washington State, 2001-2013.

Exposure to hydrofluoric acid (HF) causes corrosive chemical burns and potentially fatal systemic toxicity. Car and truck wash cleaning products, rust removers, and aluminum brighteners often contain HF because it is efficient in breaking down roadway matter. The death of a truck wash worker from ingestion of an HF-based wash product and 48 occupational HF burn cases associated with car and truck washing in Washington State during 2001-2013 are summarized in this report.

Protection efficacy of gloves against components of the solvent in a sprayed isocyanate coating utilizing a reciprocating permeation panel.

Objectives: Determine protection effectiveness of 5-mil natural rubber latex (0.13-mm), 5-mil nitrile rubber (0.13-mm), and 13-mil butyl rubber (0.

Respiratory disease associated with occupational inhalation to hop (Humulus lupulus) during harvest and processing.

Background: There is little published evidence for occupational respiratory disease caused by hop dust inhalation. In the United States, hops are commercially produced in the Pacific Northwest region.

Objective: To describe occupational respiratory disease in hop workers.

Distribution of asthma by occupation: Washington State behavioral risk factor surveillance system data, 2006-2009.

Objective: To estimate the prevalence of asthma in workers by occupation in Washington State.

Methods: Data from the 2006-2009 Behavioral Risk Factor Surveillance System (BRFSS) and the BRFSS Asthma Call-Back Survey (ACBS) in Washington State (WA) were analyzed. Using state-added and coded Industry and Occupation questions, we calculated prevalence ratios (PRs) for 19 occupational groups.

Testing of glove efficacy against sprayed isocyanate coatings utilizing a reciprocating permeation panel.

Objectives: Modify a permeation panel to evaluate dermal protective clothing for resistance to sprayed coatings with minimal variability in spray paint loading across the test panel. Determine isocyanate protection effectiveness of natural rubber latex (5 mil or 0.13mm), nitrile rubber (5 mil or 0.

Understanding factors that influence protective glove use among automotive spray painters.

Dermal contact with isocyanate-based coatings may lead to systemic respiratory sensitization. The most common isocyanates found in sprayed automotive coatings are monomeric and oligomeric 1,6-hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI). Most spray painters use thin (4-5 mil) latex gloves that are not effective at preventing dermal exposures when spraying isocyanate paints.

Prevention guidance for isocyanate-induced asthma using occupational surveillance data.

Data from Washington State's work-related asthma surveillance system were used to characterize isocyanate-induced asthma cases occurring from 1999 through 2010. Injured worker interviews and medical records were used to describe the industry, job title, work process, workers' compensation cost, and exposure trends associated with 27 cases of isocyanate-induced asthma. The majority (81%) of cases were classified within the surveillance system as new-onset asthma while 19% were classified as work-aggravated asthma.

Airborne isocyanate exposures in the collision repair industry and a comparison to occupational exposure limits.

Isocyanate exposure was evaluated in 33 spray painters from 25 Washington State autobody shops. Personal breathing zone samples (n = 228) were analyzed for isophorone diisocyanate (IPDI) monomer, 1,6-hexamethylene diisocyanate (HDI) monomer, IPDI polyisocyanate, and three polyisocyanate forms of HDI. The objective was to describe exposures to isocyanates while spray painting, compare them with short-term exposure limits (STELs), and describe the isocyanate composition in the samples.

Work-related asthma in Washington State.

Objective: Asthma is a common and costly public health problem. Occupational exposures contribute to the burden of asthma. Identifying workplace exposures and industries and occupations at risk can lead to more effective prevention measures.

Survey of dermal protection in Washington State collision repair industry.

Substantial exposure to isocyanates may occur during spray painting in autobody shops, yet information is lacking on the efficacy of the protective clothing used during spray painting. We investigated the personal and workplace factors associated with painters' dermal protection use during a large-scale exposure assessment study. Survey data indicated that 69% of painters always used gloves, with latex gloves (47%) and nitrile gloves (34%) used most frequently.

Field comparison of air sampling methods for monomeric and polymeric 1,6-hexamethylene diisocyanate.

This study was to critically compared 13 different air samplers for their ability to monitor air exposures to monomeric and polymeric 1,6-hexamethylene diisocyanate (HDI) in the automotive refinishing industry. Using both fast- and slow-drying clearcoat, we tested the following types of samplers: single- and dual-stage 37-mm polypropylene (PP) and polystyrene (PS) samplers (open- and closed-face), IOM (with plastic and stainless steel inserts), OSHA42, IsoChek, and WA-DOSH samplers. Midget impingers with frit were used as reference samplers.

Development of a permeation panel to test dermal protective clothing against sprayed coatings.

Objectives: Design, construct, and characterize an apparatus to evaluate dermal protective clothing for resistance to polymerizing materials. Specifically, we evaluated the permeation of the most common glove material used in automotive collision repair (0.10-0.

Occupational carbon monoxide poisoning in Washington State, 2000-2005.

Washington State workers' compensation data can be used to guide prevention efforts focused on occupational carbon monoxide (CO) poisoning. Between 2000 and 2005, a total of 345 individual claims comprising 221 different exposure incidents were identified for the 6-year time period. The construction industry had 43 (20%) CO incidents, followed by wholesale trade with 32 (15%), and agriculture with 27 (12%) incidents.

Surveillance of Washington OSHA exposure data to identify uncharacterized or emerging occupational health hazards.

Chemical substance exposure data from the Washington State Occupational Safety and Health Administration (OSHA) program were reviewed to determine if inspections conducted as a result of a report of a hazard from a complainant or referent may alert the agency to uncharacterized or emerging health hazards. Exposure and other electronically stored data from 6890 health inspection reports conducted between April 2003 and August 2008 were extracted from agency records. A total of 515 (7%) inspections with one or more personal airborne chemical substance samples were identified for further study.

Characterizing the health and safety needs of the collision repair industry.

Production workers in the collision repair industry are potentially exposed to many harmful chemicals, including isocyanates. Of particular concern is the burden of work-related asthma in this industry that likely reflects exposures to the isocyanates in two-part paints. The main objectives of this study were to gather information about: (i) the collision repair industry business model, (ii) the number of collision repair production workers potentially exposed to isocyanates, (iii) additional chemical and physical exposures of concern, (iv) current health and safety practices in the industry, (v) the health and safety perceptions and needs of business owners and managers, and (vi) strategies to reduce exposure and increase employer and worker awareness.

Accuracy of task recall for epidemiological exposure assessment to construction noise.

Aims: To validate the accuracy of construction worker recall of task and environment based information; and to evaluate the effect of task recall on estimates of noise exposure.

Methods: A cohort of 25 construction workers recorded tasks daily and had dosimetry measurements weekly for six weeks. Worker recall of tasks reported on the daily activity cards was validated with research observations and compared directly to task recall at a six month interview.

Reaching managers at an industry association conference: evaluation of ergonomics training.

Managers rarely receive targeted safety and health training, despite the belief that management support is important for a successful workplace safety and health program. A program evaluation was performed on an ergonomics workshop for managers attending an industry association conference. The goals were to determine whether the conference was an effective setting for the training, to assess whether the training led to an increase in participants' knowledge and ability, and to determine whether participants could use what was taught in an applied exercise.

The impact of reduced frequency of cage changes on the health of mice housed in ventilated cages.

Our purpose in this investigation was to determine if we could reduce cage changing frequency without adversely affecting the health of mice. We housed mice at three different cage changing frequencies: 7, 14, and 21 days, each at three different cage ventilation rates: 30, 60 and 100 air changes per hour (ACH), for a total of nine experimental conditions. For each condition, we evaluated the health of 12 breeding pairs and 12 breeding trios of C57BL/6J mice for 7 months.

Control strategies for aeroallergens in an animal facility.

Background: Prevalence of the occupational disease laboratory animal allergy could be reduced if aeroallergen reduction strategies are identified.

Objective: To reduce worker exposure to Mus m 1, an allergen from laboratory mice, the effect of filter cage tops, increased room ventilation, negatively pressurized ventilated cages, and ventilated cage-changing tables were evaluated.

Methods: Aeroallergen was collected in the ambient air and in the breathing zone and quantified by using a competitive immunoassay.