A Combined Experimental and Computational Exploration of Heteroleptic cis-PdLL' Coordination Cages through Geometric Complementarity.

Heteroleptic (mixed-ligand) coordination cages are of interest as host systems with more structurally and functionally complex cavities than homoleptic architectures. The design of heteroleptic cages, however, is far from trivial. In this work, we experimentally probed the self-assembly of Pd(II) ions with binary ligand combinations in a combinatorial fashion to search for new cis-PdLL' heteroleptic cages.

Photoresponsive Organic Cages─Computationally Inspired Discovery of Azobenzene-Derived Organic Cages.

The incorporation of photoresponsive groups into porous materials is attractive as it offers potential advantages in controlling the pore size and selectivity to guest molecules. A combination of computational modeling and experiment resulted in the synthesis of two azobenzene-derived organic cages based on building blocks identified in a computational screen. Both cages incorporate three azobenzene moieties, and are therefore capable of 3-fold isomerization, using either ditopic or tetratopic aldehydes containing diazene functionality.

Dynamic and solid-state behaviour of bromoisotrianglimine.

Solid-state materials formed from discrete imine macrocycles have potential in industrial separations, but dynamic behaviour during both synthesis and crystallisation makes them challenging to exploit. Here, we explore opportunities for structural control by investigating the dynamic nature of a C-5 brominated isotrianglimine in solution and under crystallisation conditions. In solution, the equilibrium between the [3 + 3] and the less reported [2 + 2] macrocycle was investigated, and both macrocycles were fully characterised.

Gas Uptake and Thermodynamics in Porous Liquids Elucidated by Xe NMR.

We exploited Xe NMR to investigate xenon gas uptake and dynamics in a porous liquid formed by dissolving porous organic cages in a cavity-excluded solvent. Quantitative Xe NMR shows that when the amount of xenon added to the sample is lower than the amount of cages present (subsaturation), the porous liquid absorbs almost all xenon atoms from the gas phase, with 30% of the cages occupied with a Xe atom. A simple two-site exchange model enables an estimate of the chemical shift of Xe in the cages, which is in good agreement with the value provided by first-principles modeling.

Streamlining the automated discovery of porous organic cages.

Self-assembly through dynamic covalent chemistry (DCC) can yield a range of multi-component organic assemblies. The reversibility and dynamic nature of DCC has made prediction of reaction outcome particularly difficult and thus slows the discovery rate of new organic materials. In addition, traditional experimental processes are time-consuming and often rely on serendipity.

Incorporating Photoresponses into Porous Liquids.

Porous liquids combine the properties of a porous solid with those of a liquid, creating a porous flowable media. Since their discovery, these materials have gathered widespread interest within the scientific community, with substantial numbers of new systems being discovered, often with a focus on increasing the pore volume and gas capacity. Which begs the question, what does the future hold for porous liquids? Recently, the first examples of photoresponsive porous liquids have emerged, allowing changes in porosity to be observed under UV irradiation.

Liquids with Permanent Macroporosity.

Permanent macropores (>50 nm) had not been reported in the liquid state until a recent report by Tao Li and co-workers describing a synthetic strategy to form a porous liquid with dual micro-macroporosity. This is prepared by producing hierarchically porous particles that are surface coated and fluidised by dispersion. Surface micropores enable permanent porosity by steric exclusion of the fluid phase.

Competitive aminal formation during the synthesis of a highly soluble, isopropyl-decorated imine porous organic cage.

The synthesis of a new porous organic cage decorated with isopropyl moieties (CC21) was achieved from the reaction of triformylbenzene and an isopropyl functionalised diamine. Unlike structurally analogous porous organic cages, its synthesis proved challenging due to competitive aminal formation, rationalised using control experiments and computational modelling. The use of an additional amine was found to increase conversion to the desired cage.

Photoresponsive Type III Porous Liquids.

Porous materials are the subject of extensive research because of potential applications in areas such as gas adsorption and molecular separations. Until recently, most porous materials were solids, but there is now an emerging class of materials known as porous liquids. The incorporation of intrinsic porosity or cavities in a liquid can result in free-flowing materials that are capable of gas uptakes that are significantly higher than conventional non-porous liquids.

Porous liquids - the future is looking emptier.

The development of microporosity in the liquid state is leading to an inherent change in the way we approach applications of functional porosity, potentially allowing access to new processes by exploiting the fluidity of these new materials. By engineering permanent porosity into a liquid, over the transient intermolecular porosity in all liquids, it is possible to design and form a porous liquid. Since the concept was proposed in 2007, and the first examples realised in 2015, the field has seen rapid advances among the types and numbers of porous liquids developed, our understanding of the structure and properties, as well as improvements in gas uptake and molecular separations.

Enabling Technology for Supramolecular Chemistry.

Supramolecular materials-materials that exploit non-covalent interactions-are increasing in structural complexity, selectivity, function, stability, and scalability, but their use in applications has been comparatively limited. In this Minireview, we summarize the opportunities presented by enabling technology-flow chemistry, high-throughput screening, and automation-to wield greater control over the processes in supramolecular chemistry and accelerate the discovery and use of self-assembled systems. Finally, we give an outlook for how these tools could transform the future of the field.

Materials Precursor Score: Modeling Chemists' Intuition for the Synthetic Accessibility of Porous Organic Cage Precursors.

Computation is increasingly being used to try to accelerate the discovery of new materials. One specific example of this is porous molecular materials, specifically porous organic cages, where the porosity of the materials predominantly comes from the internal cavities of the molecules themselves. The computational discovery of novel structures with useful properties is currently hindered by the difficulty in transitioning from a computational prediction to synthetic realization.

Integrating Computational and Experimental Workflows for Accelerated Organic Materials Discovery.

Organic materials find application in a range of areas, including optoelectronics, sensing, encapsulation, molecular separations, and photocatalysis. The discovery of materials is frustratingly slow however, particularly when contrasted to the vast chemical space of possibilities based on the near limitless options for organic molecular precursors. The difficulty in predicting the material assembly, and consequent properties, of any molecule is another significant roadblock to targeted materials design.

Continuous and scalable synthesis of a porous organic cage by twin screw extrusion (TSE).

The continuous and scalable synthesis of a porous organic cage (), obtained through a 10-component imine polycondensation between triformylbenzene and a vicinal diamine, was achieved using twin screw extrusion (TSE). Compared to both batch and flow syntheses, the use of TSE enabled the large scale synthesis of using minimal solvent and in short reaction times, with liquid-assisted grinding (LAG) also promoting window-to-window crystal packing to form a 3-D diamondoid pore network in the solid state. A new kinetically trapped [3+5] product was also observed alongside the formation of the targeted [4+6] cage species.

High-Throughput Approaches for the Discovery of Supramolecular Organic Cages.

The assembly of complex molecules, such as organic cages, can be achieved through supramolecular and dynamic covalent strategies. Their use in a range of applications has been demonstrated, including gas uptake, molecular separations, and in catalysis. However, the targeted design and synthesis of new species for particular applications is challenging, particularly as the systems become more complex.

Accelerated robotic discovery of type II porous liquids.

Porous liquids are an emerging class of materials and to date little is known about how to best design their properties. For example, bulky solvents are required that are size-excluded from the pores in the liquid, along with high concentrations of the porous component, but both of these factors may also contribute to higher viscosities, which are undesirable. Hence, the inherent multivariate nature of porous liquids makes them amenable to high-throughput optimisation strategies.

Organic Cage Dumbbells.

Molecular dumbbells with organic cage capping units were synthesised via a multi-component imine condensation between a tri-topic amine and di- and tetra-topic aldehydes. This is an example of self-sorting, which can be rationalised by computational modelling.

Controlling Gas Selectivity in Molecular Porous Liquids by Tuning the Cage Window Size.

Control of pore window size is the standard approach for tuning gas selectivity in porous solids. Here, we present the first example where this is translated into a molecular porous liquid formed from organic cage molecules. Reduction of the cage window size by chemical synthesis switches the selectivity from Xe-selective to CH -selective, which is understood using Xe, H, and pulsed-field gradient NMR spectroscopy.

Computational discovery of molecular C encapsulants with an evolutionary algorithm.

Computation is playing an increasing role in the discovery of materials, including supramolecular materials such as encapsulants. In this work, a function-led computational discovery using an evolutionary algorithm is used to find potential fullerene (C) encapsulants within the chemical space of porous organic cages. We find that the promising host cages for C evolve over the simulations towards systems that share features such as the correct cavity size to host C, planar tri-topic aldehyde building blocks with a small number of rotational bonds, di-topic amine linkers with functionality on adjacent carbon atoms, high structural symmetry, and strong complex binding affinity towards C.

From Concept to Crystals via Prediction: Multi-Component Organic Cage Pots by Social Self-Sorting.

We describe the a priori computational prediction and realization of multi-component cage pots, starting with molecular predictions based on candidate precursors through to crystal structure prediction and synthesis using robotic screening. The molecules were formed by the social self-sorting of a tri-topic aldehyde with both a tri-topic amine and di-topic amine, without using orthogonal reactivity or precursors of the same topicity. Crystal structure prediction suggested a rich polymorphic landscape, where there was an overall preference for chiral recognition to form heterochiral rather than homochiral packings, with heterochiral pairs being more likely to pack window-to-window to form two-component capsules.

Computationally-inspired discovery of an unsymmetrical porous organic cage.

A completely unsymmetrical porous organic cage was synthesised from a C symmetrical building block that was identified by a computational screen. The cage was formed through a 12-fold imine condensation of a tritopic C symmetric trialdehyde with a ditopic C symmetric diamine in a [4 + 6] reaction. The cage was rigid and microporous, as predicted by the simulations, with an apparent Brunauer-Emmett-Teller surface area of 578 m g.

Understanding gas capacity, guest selectivity, and diffusion in porous liquids.

Porous liquids are a new class of material that could have applications in areas such as gas separation and homogeneous catalysis. Here we use a combination of measurement techniques, molecular simulations, and control experiments to advance the quantitative understanding of these liquids. In particular, we show that the cage cavities remain unoccupied in the absence of a suitable guest, and that the liquids can adsorb large quantities of gas, with gas occupancy in the cages as high as 72% and 74% for Xe and SF, respectively.

Liquids with permanent porosity.

Porous solids such as zeolites and metal-organic frameworks are useful in molecular separation and in catalysis, but their solid nature can impose limitations. For example, liquid solvents, rather than porous solids, are the most mature technology for post-combustion capture of carbon dioxide because liquid circulation systems are more easily retrofitted to existing plants. Solid porous adsorbents offer major benefits, such as lower energy penalties in adsorption-desorption cycles, but they are difficult to implement in conventional flow processes.

Dynamic flow synthesis of porous organic cages.

The dynamic covalent synthesis of two imine-based porous organic cages was successfully transferred from batch to continuous flow. The same flow reactor was then used to scramble the constituents of these two cages in differing ratios to form cage mixtures. Preparative HPLC purification of one of these mixtures allowed rapid access to a desymmetrised cage molecule.