Silk Industry Waste Protein-Derived Sericin Hybrid Nanoflowers for Antibiotics Remediation via Circular Economy.

Hybrid protein-copper nanoflowers have emerged as promising materials with diverse applications in biocatalysis, biosensing, and bioremediation. Sericin, a waste biopolymer from the textile industry, has shown potential for fabricating such nanoflowers. However, the influence of the molecular weight of sericin on nanoflower morphology and peroxidase-like activity remains unexplored.

Unveiling the potential of cellulose nanofibre based nitrogen fertilizer and its transformative effect on (Mung Bean): nanofibre for sustainable agriculture.

Introduction: Fertilizer management is crucial to maintaining a balance between environmental health, plant health, and total crop yield. Farmers are overutilizing fertilizers with a mind set to enhance the productive capacity of the field, which adversely impacts soil fertility and causes serious environmental hazards. To mitigate the issues of over-utilization of fertilizers, controlled-release fertilizers were developed using nitrogen fertilizer (ammonium chloride) loaded on cellulose nanofibres (named CNF*N).

Banana fibre-chitosan-guar gum composite as an alternative wound healing material.

Bio-composites, which can be obtained from the renewable natural resources, are fascinating material for use as sustainable biomaterials with essential properties like biodegradable, bio-compatibility as well cyto-compatibility etc. These properties are useful for bio-medical including wound healing applications. In this study, fibre obtained banana pseudo stem of banana plant, which is otherwise wasted, was used as a material along with chitosan and guar gum to fabricate a banana fibre-biopolymer composite patch.

Rice straw-derived cellulose: a comparative study of various pre-treatment technologies and its conversion to nanofibres.

Rice straw is a waste product generated after the harvesting of rice crops and is commonly disposed of by burning it off in open fields. This study explored the potential for the extraction and conversion of cellulose to cellulose nanofibres (CNFs) to be used as smart delivery systems for fertilizers applications. In this study, alkali, steam explosion, and organosolv treatments were investigated for cellulose extraction efficiency.

Controlled release fertilizer delivery system derived from rice straw cellulose nanofibres: a circular economy based solution for sustainable development.

Recently, the development of sustainable and environmentally friendly biomaterials has gained the attention of researchers as potential alternatives to petroleum-based materials. Biomaterials are a promising candidate to mitigate sustainability issues due to their renewability, biodegradability, and cost-effectiveness. Thus, the purpose of this study is to explore a cost-effective biomaterial-based delivery system for delivering fertilizers to plants.

Methods for Silk Property Analyses across Structural Hierarchies and Scales.

Silk from silkworms and spiders is an exceptionally important natural material, inspiring a range of new products and applications due to its high strength, elasticity, and toughness at low density, as well as its unique conductive and optical properties. Transgenic and recombinant technologies offer great promise for the scaled-up production of new silkworm- and spider-silk-inspired fibres. However, despite considerable effort, producing an artificial silk that recaptures the physico-chemical properties of naturally spun silk has thus far proven elusive.

Novel hybrid biocomposites for tendon grafts: The addition of silk to polydioxanone and poly(lactide-co-caprolactone) enhances material properties, and biocompatibility.

Biopolymers play a critical role as scaffolds used in tendon and ligament (TL) regeneration. Although advanced biopolymer materials have been proposed with optimised mechanical properties, biocompatibility, degradation, and processability, it is still challenging to find the right balance between these properties. Here, we aim to develop novel hybrid biocomposites based on poly(-dioxanone) (PDO), poly(lactide-co-caprolactone) (LCL) and silk to produce high-performance grafts suitable for TL tissue repair.

Tuning the microstructure and mechanical properties of lyophilized silk scaffolds by pre-freezing treatment of silk hydrogel and silk solution.

This work aims to understand how pre-freezing treatments (-20 °C, -80 °C or -196 °C (liquid nitrogen)) affect the microstructure, mechanical properties and secondary structure of silk scaffolds prepared from lyophilization of silk hydrogels and silk solutions. It is found that in comparison with silk solutions, silk hydrogels at the same silk fibroin concentrations produce scaffolds with more nanofibrous structures when they are pre-frozen at the different temperatures. Although pre-freezing with liquid nitrogen can produce nanofibrous scaffolds from either a silk solution (low concentration of 2%) or silk hydrogel (produced from 2 to 6% silk fibroin solutions), aligned macro-channels can be produced only from silk hydrogels.

1000 spider silkomes: Linking sequences to silk physical properties.

Spider silks are among the toughest known materials and thus provide models for renewable, biodegradable, and sustainable biopolymers. However, the entirety of their diversity still remains elusive, and silks that exceed the performance limits of industrial fibers are constantly being found. We obtained transcriptome assemblies from 1098 species of spiders to comprehensively catalog silk gene sequences and measured the mechanical, thermal, structural, and hydration properties of the dragline silks of 446 species.

Enhanced formation of bioactive and strong silk-bioglass hybrid materials through organic-inorganic mutual molecular nucleation induction and templating.

Materials based on silk fibroin (SF) are important for many biomedical applications due to their excellent biocompatibility and tunable biodegradability. However, the insufficient mechanical strength and low bioactivity of these materials have limited their applications. For silk hydrogels, slow gelation is also a crucial problem.

A Substantial Role of Agro-Textiles in Agricultural Applications.

Agro-textiles have been used in the agriculture sector for thousands of years and are an attractive tool for the protection of crops during their entire lifecycle. Currently, the agro-textile market is dominated by polyolefins or petrochemical-based agro-textiles. However, climate change and an increase in greenhouse gas emissions have raised concern about the future oil-based economy, and petroleum-based agro-textiles have become expensive and less desirable in the modern world.

Nanovoid formation induces property variation within and across individual silkworm silk threads.

Silk is a unique fiber, having a strength and toughness that exceeds other natural fibers. While inroads have been made in our understanding of silkworm silk structure and function, few studies have measured structure and function at nanoscales. As a consequence, the sources of variation in mechanical properties along single silk fibers remain unresolved at multiple scales.

Toughening Wet-Spun Silk Fibers by Silk Nanofiber Templating.

Regenerated silk fibers typically fall short of silkworm cocoon fibers in mechanical properties due to reduced fiber crystal structure and alignment. One approach to address this has been to employ inorganic materials as reinforcing agents. The present study avoids the need for synthetic additives, demonstrating the first use of exfoliated silk nanofibers to control silk solution crystallization, resulting in all-silk pseudocomposite fibers with remarkable mechanical properties.

Mechanical, structural and biodegradation characteristics of fibrillated silk fibres and papers.

We characterised fibres and papers of microfibrillated silk from Bombyx mori produced by mechanical and enzymatic process. Milling increased the specific surface area of fibres from 1.5 to 8.

Improving the Tensile Properties of Wet Spun Silk Fibers Using Rapid Bayesian Algorithm.

Wet spinning of silkworm silk has the potential to overcome the limitations of the natural spinning process, producing fibers with exceptional mechanical properties. However, the complexity of the extraction and spinning processes have meant that this potential has so far not been realized. The choice of silk processing parameters, including fiber degumming, dissolving, and concentration, are critical in producing a sufficiently viscous dope, while avoiding silk's natural tendency to gel via self-assembly.

Enhancing Resistance of Silk Fibroin Material to Enzymatic Degradation by Cross-Linking Both Crystalline and Amorphous Domains.

Silk fibroin (SF) membranes are finding widespread use as biomaterial scaffolds in a range of tissue engineering applications. The control over SF scaffold degradation kinetics is usually driven by the proportion of SF crystalline domains in the formulation, but membranes with a high β-sheet content are brittle and still contain amorphous domains, which are highly susceptible to enzymatic degradation. In this work, photo-cross-linking of SF using a ruthenium-based method, and with the addition of glycerol, was used to generate robust and flexible SF membranes for long-term tissue engineering applications requiring slow degradation of the scaffolds.

Silk Protein Paper with In Situ Synthesized Silver Nanoparticles.

Silver nanoparticles (AgNPs) are in situ synthesized for the first time on microfibrillated silk (MFS) exfoliated from domesticated Philosamia cynthia ricini (eri) and Bombyx mori (mulberry) silkworm silk fibers. The process is rapid (hours time), does not rely on harmful chemicals, and produces robust and flexible AgNPs coated MFS (MFS-AgNPs) protein papers with excellent handling properties. None of these can be achieved by approaches used in the past to fabricate AgNPs silk systems.

Spinning Regenerated Silk Fibers with Improved Toughness by Plasticizing with Low Molecular Weight Silk.

Low-molecular weight (LMW) silk was utilized as a LMW silk plasticizer for regenerated silk, generating weak physical crosslinks between high-molecular weight (HMW) silk chains in the amorphous regions of a mixed solution of HMW/LMW silk. The plasticization effect of LMW silk was investigated using mechanical testing, Raman spectroscopy, and wide-angle X-ray scattering (WAXS). Small amounts (10%) of LMW silk resulted in a 19.

3D printing of silk microparticle reinforced polycaprolactone scaffolds for tissue engineering applications.

Polycaprolactone (PCL) scaffolds have been widely investigated for tissue engineering applications, however, they exhibit poor cell adhesion and mechanical properties. Subsequently, PCL composites have been produced to improve the material properties. This study utilises a natural material, Bombyx mori silk microparticles (SMP) prepared by milling silk fibre, to produce a composite to enhance the scaffolds properties.

Exfoliating B. mori silk into high aspect ratio nanofibrils facilitated by response surface methodology.

Silk fiber is formed by an assembly of fibrils. The fibrils can be isolated by a top-down mechanical process called microfibrillation and the fibrils are known as microfibrillated silk (MFS). The process involves chopping, milling, enzyme treatment and high-pressure homogenization.

Tunable Biodegradable Silk-Based Memory Foams with Controlled Release of Antibiotics.

Sustained, local delivery of the antibiotic ciprofloxacin under different formats from porous silk protein-based memory foam systems was studied. Similarly, protease XIV was incorporated during processing to provide control of the degradation kinetics of the silk materials. In vitro antibiotic release studies combined with degradation assessments were utilized to assess the mechanisms and kinetics of release from the silk materials.

Protein Paper from Exfoliated Eri Silk Nanofibers.

The exfoliation of silk fiber is an attractive method to produce silk micro- and nanofibers that retain the secondary structure of native silk. However, most fibrillation methods used to date require the use of toxic and/or expensive solvents and the use of high energy. This study describes a low cost, scalable method to produce microfibrillated silk nanofibers without the use of toxic chemicals by controlling the application of shear using commercially scalable milling and homogenization equipment.

Silk particles, microfibres and nanofibres: A comparative study of their functions in 3D printing hydrogel scaffolds.

Silk, with highly crystalline structure and well-documented biocompatibility, is promising to be used as reinforcing material and build functionalized composite scaffolds. In the present study, we developed chitosan/silk composite scaffolds using silk particles, silk microfibres and nanofibres via 3D printing method. The three forms of silk fillers with varied shapes and dimensions were obtained via different processing methods and evaluated of their morphology, crystalline structure and thermal property.

Facile and versatile solid state surface modification of silk fibroin membranes using click chemistry.

Reported is a fast and versatile protocol to surface modify pre-cast silk membranes targeting tyrosine residues. Enriched alkyne silk membranes were prepared using this method and azides possessing a range of functional groups were tethered to the membrane surface using click chemistry to give a range of water contact angles from 85 ± 3° to 34 ± 6°.