Investigation on Tattoo Ink (Hexadecachlorinate Copper Phthalocyanine) Removal: Novel Chemical and Biological Approach.

Tattoos have been a ubiquitous phenomenon throughout history. Now, the demand for tattoo removal for aesthetic or practical reasons is growing rapidly. This study outlines the results of field investigations into the chemical and biological removal of tattoo inks (Hexadecachlorinate copper phthalocyanine-CClCuN-CAS no° 1328-53-6).

Enhanced Photocatalytic Paracetamol Degradation by NiCu-Modified TiO Nanotubes: Mechanistic Insights and Performance Evaluation.

Anodic TiO nanotube arrays decorated with Ni, Cu, and NiCu alloy thin films were investigated for the first time for the photocatalytic degradation of paracetamol in water solution under UV irradiation. Metallic co-catalysts were deposited on TiO nanotubes using magnetron sputtering. The influence of the metal layer composition and thickness on the photocatalytic activity was systematically studied.

The Chemistry of Chelation for Built Heritage Cleaning: The Removal of Copper and Iron Stains.

Chelators are widely used in conservation treatments to remove metal stains from marble, travertine, and limestone surfaces. In the current review the chemical aspects underlying the use of chelators for the removal of copper and iron stains from built heritage are described and clear criteria for the selection of the most efficient stain removal treatment are given. The main chelator structural features are outlined and the operating conditions for effective metal stain removal (pH, time of application, etc.

Tackling the Challenging Determination of Trace Elements in Ultrapure Silicon Carbide by LA-ICP-MS.

The goal of accurately quantifying trace elements in ultrapure silicon carbide (SiC) with a purity target of 5N (99.999% purity) was addressed. The unsuitability of microwave-assisted acid digestion followed by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) analysis was proved to depend mainly on the contamination induced by memory effects of PTFE microwave vessels and by the purity levels of acids, even if highly pure ones were used in a clean environment.

Historical Silk: A Novel Method to Evaluate Degumming with Non-Invasive Infrared Spectroscopy and Spectral Deconvolution.

To correctly manage a collection of historical silks, it is important to detect if the yarn has been originally subjected to degumming. This process is generally applied to eliminate sericin; the obtained fiber is named soft silk, in contrast with hard silk which is unprocessed. The distinction between hard and soft silk gives both historical information and useful indications for informed conservation.

Biodeterioration of carbographic ribbon: Isolation, identification of causal agents and forensic implications.

Unlabelled: This study is part of a comprehensive investigation that was performed in regard to a case of alterations on a carbographic ribbon used in a typewriter that was found and seized by inner security operations of the Arma dei Carabinieri, Italy. Thirty-six coded scripts possessing potentially and criminally liable content were present on the tape; however, only the 6th and 7th scripts exhibited alterations of an uncertain nature. The study included sampling that was performed under sterile conditions of a large surface area of carbographic ribbons.

How to Clean and Safely Remove HF from Acid Digestion Solutions for Ultra-Trace Analysis: A Microwave-Assisted Vessel-Inside-Vessel Protocol.

The complete dissolution of silicate-containing materials, often necessary for elemental determination, is generally performed by microwave-assisted digestion involving the forced use of hydrofluoric acid (HF). Although highly efficient in dissolving silicates, this acid exhibits many detrimental effects (e.g.

Understanding the Microstructure of Mortars for Cultural Heritage Using X-ray CT and MIP.

In this study, the microstructure of mock-up mortar specimens for a historic environment, composed of different mixtures, was studied using mercury intrusion porosity (MIP) and microcomputed tomography (µCT), highlighting the advantages and drawbacks of both techniques. Porosity, sphericity, and pores size distribution were studied, evaluating changes according to mortar composition (aerial and hydraulic binders, quartz sand, and crushed limestone aggregate). The µCT results were rendered using 3D visualization software, which provides complementary information for the interpretation of the data obtained using 3D data-analysis software.

Optimization of Copper Stain Removal from Marble through the Formation of Cu(II) Complexes in Agar Gels.

Copper complexes with different ligands (ethylenediaminetetraacetic acid, EDTA, ammonium citrate tribasic, TAC, and alanine, ALA) were studied in aqueous solutions and hydrogels with the aim of setting the optimal conditions for copper stain removal from marble by agar gels, with damage minimization. The stoichiometry and stability of copper complexes were monitored by ultraviolet-visible (UV-Vis) spectroscopy and the symmetry of Cu(II) centers in the different gel formulations was studied by electron paramagnetic resonance (EPR) spectroscopy. Cleaning effectiveness in optimized conditions was verified on marble laboratory specimens through color variations and by determining copper on gels by inductively coupled plasma-mass spectrometry (ICP-MS).

Dry biocleaning of artwork: an innovative methodology for Cultural Heritage recovery?

An innovative methodology is proposed, based on applied biotechnology to the recovery of altered stonework: the "", which envisages the use of dehydrated microbial cells without the use of free water or gel-based matrices. This methodology can be particularly useful for the recovery of highly-ornamented stoneworks, which cannot be treated using the conventional cleaning techniques. The experimental plan included initial laboratory tests on Carrara marble samples, inoculated with dehydrated Saccharomyces cerevisiae yeast cells, followed by on-site tests performed on "" (), a travertine monumental complex in Rome (Italy), on altered highly ornamented areas of about 1,000 cm.

One-minute highly selective Cr(VI) determination at ultra-trace levels: An ICP-MS method based on the on-line trapping of Cr(III).

An analytical method derived from the coupling of frontal chromatography (FC) with Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) is proposed for the fast determination of Cr(VI) ultra-traces. The insertion of a short, homemade column filled with a strong cationic exchange resin in the flow-path of a commercial ICP-MS allows on-line trapping of cationic Cr(III) and elution of anionic Cr(VI). As a result, only the Cr(VI) front reaches the detector.

Introducing Frontal Chromatography-Inductively Coupled Plasma-Mass Spectrometry as a Fast Method for Speciation Analysis: The Case of Inorganic Arsenic.

A frontal chromatography-ICP-MS method (FC-ICP-MS) is proposed as an innovative approach for fast elemental speciation analysis: inorganic arsenic speciation was selected as the first case study to prove the feasibility of the technique and to explore its potentialities and limits. The principal benefits of the FC-ICP-MS approach are the short analysis time and the very simple instrumental setup. As(III) and As(V) front separation is performed over a strong anion exchanger at pH 7.

Onsite advanced biocleaning system for historical wall paintings using new agar-gauze bacteria gel.

Aims: This study reports the results of the application of a new agar-gauze biogel system activated with viable bacterial cells to altered wall paintings.

Methods And Results: Biocleaning using agar biogel and agar-gauze biogel systems was performed onsite by direct application to altered wall painting surfaces (25-1000 cm ). The treatments were performed for the restoration of two original Italian sites: (i) at the Vatican Museums, Cristo che salva Pietro dalle acque-La Navicella, a wall painting by Giovanni Lanfranco (1627-1628) and (ii) at Pisa Cathedral Cupola, Incarnato, a wall painting by Orazio Riminaldi (1593-1630) and his brother Girolamo Riminaldi.

Application of Different Fourier Transform Infrared (FT-IR) Methods in the Characterization of Lime-Based Mortars with Oxblood.

Organic compounds have frequently been added into lime mortars for property modifications, in order to satisfy various functional needs in building techniques. This study applies Fourier transform infrared (FT-IR) spectroscopy in transmission, reflection, and attenuated total reflection (ATR) modes to characterize lime-based mortar specimens containing oxblood, which has been used as additive as a common practice of long history in many parts of the world. The specimens were prepared basing upon a 19th-century Italian historic recipe, with the intention to have a better understanding on the possible characteristics of such mortars.

Hi-tech restoration by two-steps biocleaning process of Triumph of Death fresco at the Camposanto Monumental Cemetery (Pisa, Italy).

Aims: In this work, the 'hi-tech' complex biocleaning and restoration of the 14th-century fresco Triumph of Death (5·6 × 15·0 m) at the Camposanto Monumental Cemetery (Pisa, Italy) is reported. Since 2000, the restoration based on the biological cleaning of noble medieval frescoes, has been successfully utilized in this site.

Methods And Results: The novelty of this study is the two-steps biocleaning process using Pseudomonas stutzeri A29 viable cells, previously applied for recovering other valuable frescoes.

Monuments as sampling surfaces of recent traffic pollution.

Background, Aim And Scope: A new approach towards monuments, considering them as a passive sampler of pollution, is presented. Cultural Heritage objects suffer daily the damages of environmental pollution, especially in those areas interested by heavy traffic. Since monuments undergo only periodic conservation or maintenance works, surfaces are able to accumulate atmospheric deposit and to record changes in its composition.

Role of laser ablation-inductively coupled plasma-mass spectrometry in cultural heritage research: a review.

Cultural heritage represents a bridge between the contemporary society and the past populations, and a strong collaboration between archaeologists, art historians and analysts may lead to the decryption of the information hidden in an ancient object. Quantitative elemental compositional data play a key role in solving questions concerning dating, provenance, technology, use and the relationship of ancient cultures with the environment. Nevertheless, the scientific investigation of an artifact should be carried out complying with some important constraints: above all the analyses should be as little destructive as possible and performed directly on the object to preserve its integrity.

The stucco decorations from St. Lorenzo in Laino (Como, Italy): The materials and the techniques employed by the "Magistri Comacini".

The paper reports a cross-cutting and systematic approach to the analytical study of Baroque stucco decorations by Italian artists known as "Magistri Comacini". Samples from the Church of St. Lorenzo in Laino (Como, Italy) were analysed using chemical and mineralogical techniques and the results interpreted with the help of art historians in order to enlighten the artistic techniques.

Analytical investigation of calcium oxalate films on marble monuments.

This paper describes an analytical approach to investigate the origin of oxalate films on marble. Calcium oxalate films were collected on buildings of historical importance in Lucca and Pisa (Italy) and characterised by optical microscopy (OM), scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDX), Fourier transform infrared (FTIR) spectroscopy (equipped with diamond cell), and gas chromatography-mass spectrometry (GC-MS). The morphology of the films was investigated by optical and electronic microscopy.

Thin lead sheets in the decorative features in Pavia Charterhouse.

The facade of the church of the Pavia Charterhouse, built at the end of the 15th century, shows outstanding decorative features made of different stone materials, such as marbles, breccias and sandstones. Magnificent ornamental elements are made of thin lead sheets, and some marble slabs are inlaid with them. Metal elements are shaped in complex geometric and phytomorphic design, to form a Greek fret in black contrasting with the white Carrara marble.

Oxalate films and red stains on Carrara marble.

The analytical studies carried out during two different diagnostic surveys, respectively in 1983 and 2003, offered the opportunity to control decay phenomena development on stones facing Certosa of Pavia (Italy). Calcium oxalate films and red stains, present on Carrara marble surface, have been particularly focused; these are the only decay phenomena which apparently have remained unchanged during a period of twenty years. More sensitive and in-depth analytical studies (FTIR equipped with diamond cell, GC-MS, SEM-EDS and optical microscopy) achieved a better knowledge about their composition.