Evaluation of processing factors for selected organic contaminants during virgin olive oil production: Distribution of BTEXS during olives processing.

The presence of BTEXS (benzene, toluene, ethylbenzene, xylenes and styrene) in virgin olive oils can be attributed to environmental contamination, but also to biological processes during oil lipogenesis (styrene). In this work, the processing factor of BTEXS from olives to olive oil during its production was evaluated at lab-scale with an Abencor system. Benzene showed the lowest processing factor (15%), whereas toluene and xylenes showed an intermediate behavior (with 40-60% efficiency), and ethylbenzene and styrene were completely transferred (100%).

Generic sample treatment method for simultaneous determination of multiclass pesticides and mycotoxins in wines by liquid chromatography-mass spectrometry.

In this work, a generic sample treatment method for simultaneous determination of multiclass pesticides and mycotoxins in wines is presented. The proposed method is based on solid-phase extraction (SPE) using polymeric-type SPE cartridges. To evaluate the proposed sample treatment, a liquid chromatography electrospray time-of-flight mass spectrometry method was used for testing 60 selected representative multiclass pesticides and 9 mycotoxins.

Multi-residue determination of pesticides in fruit-based soft drinks by fast liquid chromatography time-of-flight mass spectrometry.

This work reports a rapid and reliable method for the determination of 33 multi-class pesticides in fruit-based soft drinks. The proposed method consists of a sample treatment step based on solid-phase extraction using hydrophilic-lipophilic balanced polymer-based reverse-phase SPE cartridges, followed by identification and quantitation of the target pesticides by rapid resolution liquid chromatography using a short C(18) column (4.6mm x 50mm) with 1.

A flow-through fluorimetric sensing device for determination of alpha- and beta-naphthol mixtures using a partial least-squares multivariate calibration approach.

A single flow-through optosensor spectrofluorimetric system is proposed for the resolution of mixtures of alpha- and beta-naphthol at mug l(-1) levels using a partial least-squares (PLS) calibration approach. The sensor was developed in conjunction with a monochannel flow-injection analysis system with fluorimetric detection using Sephadex QAE A-25 resin as an active sorbent substrate in the flow cell and the second derivative of the native synchronous fluorescence spectra of analytes as analytical signal. In the manifold, the solutions of naphthol (at pH 10.

Flow-injection solid surface lanthanide-sensitized luminescence sensor for determination of p-aminobenzoic acid.

A single optosensing device based on lanthanide-sensitized luminescence was developed for determination of p-aminobenzoic acid (PABA). The method is based on the formation of a complex between PABA and Tb(III) immobilized on the solid phase (QAE A-25 resin) placed inside the flow cell. NaCl (1 M) was used as carrier solution and HCl (0.

Analysis of pigments and coverings by X-ray diffraction (XRD) and micro Raman spectroscopy (MRS) in the cemetery of Tutugi (Galera, Granada, Spain) and the settlement convento 2 (Montemayor, Córdoba, Spain).

This paper focuses on the identification of the composition of the coverings and pigments of two archaeological sites. The sites researched here lie in Andalusia and show two contexts, which have a highly symbolic and ritual meaning. The first, Convento 2 (Montemayor, Córdoba), dates back to the period of formation of the Iberian Culture (VIIth century b.

Simultaneous multidetermination of residues of pesticides and polycyclic aromatic hydrocarbons in olive and olive-pomace oils by gas chromatography/tandem mass spectrometry.

A multiresidue method for determining major pesticides and polycyclic aromatic hydrocarbons (PAHs) in olive oils in a single injection by use of gas chromatography/tandem mass spectrometry (GC-MS/MS) is proposed. Samples are previously extracted with an acetonitrile/n-hexane mixture and cleaned up by gel permeation chromatography. Electron ionization and chemical ionization allow pesticides and PAHs to be determined in a single analysis.

Fast and single solid phase fluorescence spectroscopic batch procedure for (acetyl) salicylic acid determination in drug formulations.

A solid phase fluorescence spectroscopic batch procedure for (acetyl) salicylic acid in drug formulations have been developed. The procedure is based on the sorption of salicylic acid (SA) on Sephadex DEAE A-25 anion exchanger gel (100 mg) by equilibration from an aqueous solution (10 or 25 ml) for 5 min; the equilibrated gel is transferred into an 1 mm quartz cell and the native fluorescence of SA sorbed on it is directly measured (lambda(ex)=297 nm; lambda(em)=405 nm). Good linearity was found in the 10-200 and 5-100 microg l(-1) ranges (for 10 and 25 ml sample volume, respectively) with R.

Simultaneous determination of codeine and pyridoxine in pharmaceutical preparations by first-derivative spectrofluorimetry.

A method for the simultaneous determination of codeine and pyridoxine was developed, based on the measurement of their native fluorescence signals, by using first-derivative spectrofluorimetry to resolve the mixture. Codeine was measured at lambda(em) = 309 nm, and pyridoxine was measured at lambda(em) = 450 nm. Instrumental parameters were optimized, and the emission spectra were recorded between 275 and 475 nm, at lambda(ex) = 255 nm and excitation and emission slit widths of 2.

Application of liquid chromatography to the simultaneous determination of acetylsalicylic acid, caffeine, codeine, paracetamol, pyridoxine, and thiamine in pharmaceutical preparations.

This paper describes a rapid reversed-phase liquid chromatographic method, with UV detection, for the simultaneous determination of acetylsalicylic acid, caffeine, codeine, paracetamol, pyridoxine, and thiamine in pharmaceutical preparations. A reversed-phase C18 Nucleosil column is used. The mobile phase consists of 2 successive eluants: water (5 min) and acetonitrile-water (75 + 25, v/v; 9 min), both adjusted to pH 2.