Synthesis and Characterization of Multilayered CrAlN/AlO Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature.

The effect of applying a negative bias during deposition of a previously designed multilayer solar selective absorber coating was studied on two types of substrates (316L stainless steel and Inconel 625). The solar selective coating is composed of different chromium aluminum nitride layers deposited using a combination of radiofrequency (RF), direct current (DC), and high-power impulse magnetron sputtering (HiPIMS) technologies. The chemical composition is varied to generate an infrared reflective/absorber layer (with low Al addition and N vacancies) and two CrAlN intermediate layers with medium and high aluminum content (Al/Cr = 0.

Synthesis and Characterisation of ASA-PEEK Composites for Fused Filament Fabrication.

In this paper, a series of polymer composites made from acrylonitrile-styrene-acrylate (ASA) and poly (ether ether ketone) (PEEK) were manufactured. ASA acts as a polymer matrix while PEEK is loaded in the form of micro-particles that act as a reinforcing filler. The composites were compounded by single screw extrusion and then, different specimens were manufactured either via injection moulding (IM) or fused filament fabrication (FFF).

Cluster Tool for In Situ Processing and Comprehensive Characterization of Thin Films at High Temperatures.

A new cluster tool for in situ real-time processing and depth-resolved compositional, structural and optical characterization of thin films at temperatures from -100 to 800 °C is described. The implemented techniques comprise magnetron sputtering, ion irradiation, Rutherford backscattering spectrometry, Raman spectroscopy, and spectroscopic ellipsometry. The capability of the cluster tool is demonstrated for a layer stack MgO/amorphous Si (∼60 nm)/Ag (∼30 nm), deposited at room temperature and crystallized with partial layer exchange by heating up to 650 °C.

Formation of antireflection Zn/ZnO core-shell nano-pyramidal arrays by O ion bombardment of Zn surfaces.

ZnO is probably one of the most studied oxides since ZnO nanostructures are a very rich family of nanomaterials with a broad variety of technological applications. Although several chemical techniques offer the possibility to obtain such ZnO nanostructures, here we show that the controlled modification of the zinc surface by low-energy O bombardment leads to the formation of core-shell Zn/ZnO nano-pyramidal arrays that suppress the reflection of light decreasing the reflectivity below 6% in the wavelength range of 300-900 nm. This controlled and scalable protocol opens the door to a broad range of possibilities for the use of ion bombardment to produce surface modifications for technological applications in the field of photoelectric devices and solar cells.

Towards nanometric resolution in multilayer depth profiling: a comparative study of RBS, SIMS, XPS and GDOES.

An increasing amount of effort is currently being directed towards the development of new functionalized nanostructured materials (i.e., multilayers and nanocomposites).