Dynamic CT features of scapholunate instability during the wrist extension to flexion-An in vivo study.

Purpose: This biomechanical study aimed to assess the change in the radioscaphoid and the radiolunate angles during wrist extension to flexion in scapholunate instability compared to the healthy wrist.

Methods: Dynamic CT scans of 19 participants with no history of wrist pathology and 19 patients with scapholunate instability without degenerative changes were selected. Motion sequence studied was wrist extension to flexion.

Functional preoperative assessment of coronal knee laxity better predicts postoperative patient outcomes than intraoperative surgeon-defined laxity in total knee arthroplasty.

Purpose: Intraoperative laxity assessments in total knee arthroplasty (TKA) are subjective, with few studies comparing against standardised preoperative and postoperative assessments. This study compares coronal knee laxity in TKA patients awake and anaesthetised, preprosthesis and postprosthesis implantation, evaluating relationships to patient-reported outcome measures.

Methods: A retrospective analysis of 49 TKA joints included preoperative and postoperative computed tomography scans, stress radiographs and knee injury and osteoarthritis outcome score (KOOS) questionnaire results preoperatively and 12 months postoperatively.

Radiocarpal and midcarpal kinematics in scapholunate instability: a four-dimensional CT study in vivo.

The distribution of motion between the radiocarpal and midcarpal joints in scapholunate instability is poorly understood. This has potential implications in predicting degenerative changes and in selecting salvage procedures. We studied 19 healthy wrists and 19 wrists with scapholunate instability using dynamic computed tomography during wrist extension to flexion and ulnar to radial deviation.

Development and validation of a biomechanically fidelic surgical training knee model.

Knee arthroplasty technique is constantly evolving and the opportunity for surgeons to practice new techniques is currently highly dependent on the availability of cadaveric specimens requiring certified facilities. The high cost, limited supply, and heterogeneity of cadaveric specimens has increased the demand for synthetic training models, which are currently limited by a lack of biomechanical fidelity. Here, we aimed to design, manufacture, and experimentally validate a synthetic knee surgical training model which reproduces the flexion dependent varus-valgus (VV) and anterior-posterior (AP) mechanics of cadaveric knees, while maintaining anatomic accuracy.

In vivo strain measurements in the human buttock during sitting using MR-based digital volume correlation.

Advancements in systems for prevention and management of pressure ulcers require a more detailed understanding of the complex response of soft tissues to compressive loads. This study aimed at quantifying the progressive deformation of the buttock based on 3D measurements of soft tissue displacements from MR scans of 10 healthy subjects in a semi-recumbent position. Measurements were obtained using digital volume correlation (DVC) and released as a public dataset.

Scaphoid kinematics in scapholunate instability: a dynamic CT study.

Objective: The scaphoid is proposed to be driven by the distal carpal row in scapholunate instability (SLI) as it is dissociated from the proximal row. The aim of this study was to describe the 6 degrees of freedom kinematics of the scaphoid using dynamic CT in the normal and SLI wrists. We hypothesised that the SLI scaphoid would demonstrate kinematic evidence conforming to distal row motion.

Determining the relationship between tibiofemoral geometry and passive motion with partial least squares regression.

Tibiofemoral geometry influences knee passive motion and understanding their relationship can provide insight into knee function and mechanisms of injury. However, the complexity of the geometric constraints has made characterizing the relationship challenging. The aim of this study was to determine the tibiofemoral bone geometries that explain the variation in passive motion using a partial least squares regression (PLSR) model.

Iliopsoas tendonitis after total hip arthroplasty : an improved detection method with applications to preoperative planning.

Aims: Iliopsoas impingement occurs in 4% to 30% of patients after undergoing total hip arthroplasty (THA). Despite a relatively high incidence, there are few attempts at modelling impingement between the iliopsoas and acetabular component, and no attempts at modelling this in a representative cohort of subjects. The purpose of this study was to develop a novel computational model for quantifying the impingement between the iliopsoas and acetabular component and validate its utility in a case-controlled investigation.

The influence of fracture location and comminution on acute scaphoid fracture displacement: three-dimensional CT analysis.

We aimed to assess the influence of fracture location and comminution on acute scaphoid fracture displacement using three-dimensional CT. CT scans of 51 adults with an acute scaphoid fracture were included. Three-dimensional CT was used to assess fracture location, comminution and displacement.

Posterior malleolar ankle fractures.

Aims: The primary aim of this study was to address the hypothesis that fracture morphology might be more important than posterior malleolar fragment size in rotational type posterior malleolar ankle fractures (PMAFs). The secondary aim was to identify clinically important predictors of outcome for each respective PMAF-type, to challenge the current dogma that surgical decision-making should be based on fragment size.

Methods: This observational prospective cohort study included 70 patients with operatively treated rotational type PMAFs, respectively: 23 Haraguchi Type I (large posterolateral-oblique), 22 Type II (two-part posterolateral and posteromedial), and 25 (avulsion-) Type III.

Computational efficient method for assessing the influence of surgical variability on primary stability of a contemporary femoral stem in a cohort of subjects.

Finite element (FE) modelling can provide detailed information on implant stability; however, its computational cost limits the possibility of completing large numerical analyses into the effect of surgical variability in a cohort of patients. The aim of this study was to develop an efficient surrogate model for a cohort of patients implanted using a common cementless hip stem. FE models of implanted femora were generated from computed tomography images for 20 femora (11 males, 9 females; 50-80 years; 52-116 kg).

Influence of stems and metaphyseal sleeve on primary stability of cementless revision tibial trays used to reconstruct AORI IIB defects.

Metaphyseal augments, such as sleeves, have been introduced to augment the fixation of revision total knee replacement (rTKR) components, and can be used with or without a stem. The effect of sleeve size in combination with stems on the primary stability and load transfer of a rTKR implant in AORI type IIB defects where the defect involves both condyles are poorly understood. The aim of this study was to examine the primary stability of revision tibial tray augmented with a sleeve in an AORI type IIB defect which involves both condyles with loss of cortical and cancellous bone.

Virtual trial to evaluate the robustness of cementless femoral stems to patient and surgical variation.

Primary stability is essential for the success of cementless femoral stems. In this study, patient specific finite element (FE) models were used to assess changes in primary stability due to variability in patient anatomy, bone properties and stem alignment for two commonly used cementless femoral stems, Corail® and Summit® (DePuy Synthes, Warsaw, USA). Computed-tomography images of the femur were obtained for 8 males and 8 females.

Evaluating the primary stability of standard vs lateralised cementless femoral stems - A finite element study using a diverse patient cohort.

Background: Restoring the original femoral offset is desirable for total hip replacements as it preserves the original muscle lever arm and soft tissue tensions. This can be achieved through lateralised stems, however, the effect of variation in the hip centre offset on the primary stability remains unclear.

Methods: Finite element analysis was used to compare the primary stability of lateralised and standard designs for a cementless femoral stem (Corail®) across a representative cohort of male and female femora (N = 31 femora; age from 50 to 80 years old).

Biomechanical Robustness of a Contemporary Cementless Stem to Surgical Variation in Stem Size and Position.

Successful designs of total hip replacement (THR) need to be robust to surgical variation in sizing and positioning of the femoral stem. This study presents an automated method for comprehensive evaluation of the potential impact of surgical variability in sizing and positioning on the primary stability of a contemporary cementless femoral stem (Corail®, DePuy Synthes). A patient-specific finite element (FE) model of a femur was generated from computed tomography (CT) images from a female donor.

Influence of varying stem and metaphyseal sleeve size on the primary stability of cementless revision tibial trays used to reconstruct AORI IIA defects. A simulation study.

Traditionally, diaphyseal stems have been utilized to augment the stability of revision total knee replacement (rTKR) implants. More recently metaphyseal augments, such as sleeves, have been introduced to further augment component fixation. The effect of augments such as stems and sleeves have on the primary stability of a rTKR implant is poorly understood, however it has important implications on the complexity, costs and survivorship of the procedure.

Quantifying the in vivo quasi-static response to loading of sub-dermal tissues in the human buttock using magnetic resonance imaging.

Background: The design of seating systems to improve comfort and reduce injury would benefit from improved understanding of the deformation and strain patterns in soft tissues, particularly in the gluteal region.

Methods: Ten healthy men were positioned in a semi-recumbent posture while their pelvic and thigh region was scanned using a wide-bore magnetic resonance imaging (MRI) scanner. Independent measurements of deformation for muscles and fat were taken for the transition from non-weight-bearing to weight-bearing loads in three stages.

Influence of collars on the primary stability of cementless femoral stems: A finite element study using a diverse patient cohort.

For cementless femoral stems, there is debate as to whether a collar enhances primary stability and load transfer compared to collarless designs. Finite Element (FE) analysis has the potential to compare stem designs within the same cohort, allowing for subtle performance differences to be identified, if present. Subject-specific FE models of intact and implanted femora were run for a diverse cohort (21 males, 20 females; BMI 16.

Primary stability of a cementless acetabular cup in a cohort of patient-specific finite element models.

The primary stability achieved during total hip arthroplasty determines the long-term success of cementless acetabular cups. Pre-clinical finite element testing of cups typically use a model of a single patient and assume the results can be extrapolated to the general population. This study explored the variability in predicted primary stability of a Pinnacle cementless acetabular cup in 103 patient-specific finite element models of the hemipelvis and examined the association between patient-related factors and the observed variability.

Development and Validation of a High Anatomical Fidelity FE Model for the Buttock and Thigh of a Seated Individual.

Current practices for designing new cushions for seats depend on superficial measurements, such as pressure mapping, which do not provide sufficient information about the condition of sub-dermal tissues. Finite element (FE) modelling offers a unique alternative to integrate assessment of sub-dermal tissue condition into seat/cushion design and development processes. However, the development and validation of such FE models for seated humans requires accurate representation of the anatomy and material properties, which remain challenges that are yet to be addressed.

Deformation of the gluteal soft tissues during sitting.

Background: Excessive deformation of soft tissues is considered to be one of the major contributing factors to discomfort and injury for individuals who sit for long periods of time. Soft tissue deformation in research has been measured under the assumption that tissues deform uniaxially below the ischium, with very small or negligible deformations taking place in other directions. Therefore, this study describes the deformation of the gluteus maximus muscle and surrounding fat tissues in the buttock region for seated subjects.