High light extraction performance using evanescent waves for top emission OLED applications with thin film encapsulation.

We report high light extraction from the top emission OLED (TEOLED) device structure by improving mainly the waveguide mode loss in the atomic layer deposition processed thin film encapsulation (TFE) layer. A novel structure incorporating the light extraction concept using evanescent waves and the hermetic encapsulation of a TEOLED device is presented here. When the TEOLED device is fabricated using the TFE layer, a substantial amount of generated light is trapped inside the device due to the difference in refractive index (RI) between the capping layer (CPL) and the aluminum oxide (AlO) layer.

Degradation of OLED performance by exposure to UV irradiation.

Organic light-emitting diode (OLED) displays are highly susceptible to the harsh environmental conditions found outdoors, like exposure to direct sunlight as well as UV radiation and storage temperature, resulting in a loss of luminance and lifespan, pixel shrinkage, and permanent damage and/or malfunction of the panel. Here, we fabricated top emission OLEDs (TEOLEDs) using Yb : LiF (1 : 1, 2 nm)/Ag : Mg (10 : 1, 16 nm) and Mg : LiF (1 : 1, 2 nm)/Ag : Mg (10 : 1, 16 nm) cathode units and the performances of the devices were investigated by subjecting them to UV radiation. A fabricated red TEOLED (control device), employing a standard Mg : LiF (1 : 1, 2 nm) electron injection layer (EIL) and an Ag : Mg (16 nm) cathode, showed a rapid decrease in luminance and a fast increase in driving voltage at 10 mA cm over time after UV irradiation for 300 h.

An accurate measurement of the dipole orientation in various organic semiconductor films using photoluminescence exciton decay analysis.

In this study, we report an accurate and more reliable approach to estimate the dipole orientation of emitters especially phosphorescence, fluorescence and even thermally activated delayed fluorescence. The dipole orientation measurements are performed by examining the variation of the photoluminescence (PL) exciton decay rate from time-resolved PL and optical analysis. Our anisotropic dipole orientation results are consistent with those of previous reports.

Next generation smart window display using transparent organic display and light blocking screen.

Transparent organic light emitting diodes (TOLED) have widespread applications in the next-generation display devices particularly in the large size transparent window and interactive displays. Herein, we report high performance and stable attractive smart window displays using facile process. Advanced smart window display is realized by integrating the high performance light blocking screen and highly transparent white OLED panel.

Efficient micro-cavity top emission OLED with optimized Mg:Ag ratio cathode.

Micro-cavity top-emitting organic light emitting diodes (TEOLEDs) are now receiving prominence as a technology for the active matrix display applications. The semi-transparent metal cathode plays the crucial role in realizing TEOLEDs structure. Here, we report the optimization results on Mg:Ag ratio as the semitransparent cathode deposited by vacuum thermal evaporation.

Study of nanoscale photopolymerized fullerene clusters in solution droplets using an ultrasonic nebulizer unit.

In a designed and developed ultrasonic nebulizer system for obtaining macroscopic-quantity photopolymerized fullerene (C60) clusters, a C60 solution was vaporized to several micro-sized droplets in vacuum, resulting in the formation of C60 aggregates by evaporating the solvent (toluene). The system was invented to produce nanoscale photopolymerized carbon clusters through the irradiation of ultraviolet (UV) light on the C60 aggregates in vacuum. The products, photopolymerized C60 clusters obtained from the system using UV-visible (UV-Vis) absorption and high-performance (or high-pressure) liquid chromatography (HPLC) spectra, were characterized.

Hydrophobic properties of polytetrafluoroethylene thin films fabricated at various catalyzer temperatures through catalytic chemical vapor deposition using a tungsten catalyzer.

Using the catalytic chemical vapor deposition (Cat-CVD) method, polytetrafluoroethylene (PTFE) thin films were fabricated on Si(100) substrates at various catalyzer temperatures, using a tungsten catalyzer, and Fourier transform infrared (FTIR) spectroscopy and X-ray photoemission spectroscopy (XPS) were used to confirm the fabrication of the films. An atomic-force microscope (AFM) and a scanning electron microscope (SEM) were employed to study the correlation between the wettability and surface morphology of the samples. It was found that the wettability of the PTFE thin films fabricated via Cat-CVD is strongly correlated with the sizes of the film surfaces' nanoprotrusions, and that superhydrophobic PTFE thin-film surfaces can be easily achieved by controlling the sizes of the nanoprotrusions through the catalyzer temperature.

Electrical characterization of N- and P-doped hole and electron only organic devices.

We have fabricated a series of hole only devices with tungsten oxide (WO3) and molybdenum oxide (MoO3) n-doping materials in N,N'-diphenyl-N,N'-bis(1,1'-biphenyl)-4,4'-diamine (NPB) hole transport layer, and electron only devices with CsF and Cs2CO3 p-doping materials in 4,7-diphenyl-1,10-phenanthroline (Bphen) electron transport layer. Current-voltage characteristics and conductivity of these devices are investigated. The optimal conditions for ohmic injection and low resistance properties, and process margins of each dopant are reported in this paper.