A 500 kV, 10 kA, 40 ns coaxial Marx generator pulser for cable fed flash x-ray system.

Flash x-ray (FXR) systems are used for dynamic radiography. Depending on the speed of the object, these systems typically require a very short pulse duration (∼25 ns) for image acquisition without motion blur. The conventional Marx generators with zigzag discharge paths result in higher inductance; hence, they do not meet the requirement of shorter pulse duration (30-40 ns) and low impedance (40-60 Ω) simultaneously.

Development of cable fed flash X-ray (FXR) system.

Flash X-ray sources driven by pulsed power find applications in industrial radiography, and a portable X-ray source is ideal where the radiography needs to be taken at the test site. A compact and portable flash X-ray (FXR) system based on a Marx generator has been developed with the high voltage fed to the FXR tube via a cable feed-through arrangement. Hard bremsstrahlung X-rays of few tens of nanosecond duration are generated by impinging intense electron beams on an anode target of high Z material.

High voltage pulse shaping of e-beam diode using perveance variation.

This paper presents a new high voltage pulse shaping methodology for pulsed power applications. The aim is to generate high voltage square pulse across anode cathode gap of e-beam diodes. The non-linear time varying perveance characteristics of e-beam diodes are used for shaping of output voltage pulse across it, generated directly from Marx generator.

Generation and dose distribution measurement of flash x-ray in KALI-5000 system.

Flash x-ray generation studies have been carried out in KALI-5000 Pulse power system. The intense relativistic electron beam has been bombarded on a tantalum target at anode to produce flash x-ray via bremsstrahlung conversion. The typical electron beam parameter was 360 kV, 18 kA, and 100 ns, with a few hundreds of A/cm(2) current density.