Surface Multifunctionalization of Inert Ceramic Implants by Calcium Phosphate Biomimetic Coating Doped with Nanoparticles Encapsulating Antibiotics.

Aseptic loosening and periprosthetic infections are complications that can occur at the interface between inert ceramic implants and natural body tissues. Therefore, the need for novel materials with antibacterial properties to prevent implant-related infection is evident. This study proposes multifunctionalizing the inert ceramic implant surface by biomimetic calcium phosphate (CaP) coating decorated with antibiotic-loaded nanoparticles for bioactivity enhancement and antibacterial effect.

Measurements of Density of Liquid Oxides with an Aero-Acoustic Levitator.

Densities of liquid oxide melts with melting temperatures above 2000 °C are required to establish mixing models in the liquid state for thermodynamic modeling and advanced additive manufacturing and laser welding of ceramics. Accurate measurements of molten rare earth oxide density were recently reported from experiments with an electrostatic levitator on board the International Space Station. In this work, we present an approach to terrestrial measurements of density and thermal expansion of liquid oxides from high-speed videography using an aero-acoustic levitator with laser heating and machine vision algorithms.

Toward Innovative Hemocompatible Surfaces: Crystallographic Plane Impact on Platelet Activation.

The anticoagulation treatment of cardiovascular patients, which is mandatory after implantation of heart valves or stents, has significantly adverse effects on life quality. This treatment can be reduced or even circumvented by developing novel antithrombogenic surfaces of blood-contacting implants. Thus, we aim to discover materials exhibiting outstanding hemocompatibility compared to other available synthetic materials.

Biomimetic in situ precipitation of calcium phosphate containing silver nanoparticles on zirconia ceramic materials for surface functionalization in terms of antimicrobial and osteoconductive properties.

Objective: Zirconia is commonly used for manufacturing of dental implants thanks to its excellent mechanical, biological and aesthetic properties. However, its bioinertness inhibits bonding with the surrounding hard tissue and other surface interactions. In our study, we present a method for multifunctionalization of zirconia surface to improve its osseointegration and to minimize the infection risks.

Inkjet printed periodical micropatterns made of inert alumina ceramics induce contact guidance and stimulate osteogenic differentiation of mesenchymal stromal cells.

Bioinert high performance ceramics exhibit detrimental features for implant components with direct bone contact because of their low osseointegrating capability. We hypothesized that periodical microstructures made of inert alumina ceramics can influence the osteogenic differentiation of human mesenchymal stromal cells (hMSC). In this study, we manufactured pillared arrays made of alumina ceramics with periodicities as low as 100μm and pillar heights of 40μm employing direct inkjet printing (DIP) technique.

Calcium phosphate based three-dimensional cold plotted bone scaffolds for critical size bone defects.

Bone substitutes, like calcium phosphate, are implemented more frequently in orthopaedic surgery to reconstruct critical size defects, since autograft often results in donor site morbidity and allograft can transmit diseases. A novel bone cement, based on β-tricalcium phosphate, polyethylene glycol, and trisodium citrate, was developed to allow the rapid manufacturing of scaffolds, by extrusion freeform fabrication, at room temperature. The cement composition exhibits good resorption properties and serves as a basis for customised (e.

Calcium phosphate scaffolds mimicking the gradient architecture of native long bones.

The synthesis of beta-tricalcium phosphate (β-TCP) scaffolds offering both the macroporous inner structure required for proper in vivo degradation and a non-macroporous outer structure for the enhancement of mechanical properties continues to be a challenge. The hypothesis of this study was to realize biomimetic β-TCP scaffolds with a macroporous inner structure and a compact outer structure using a lost wax casting technique. The porosity, macropore size, interconnectivity of the inner porous structure, and diameter of the outer compact structure were adjusted to specific values using a three-dimensional wax printer to manufacture the wax molds for the casting process.

A levitation instrument for containerless study of molten materials.

A new aero-acoustic levitation instrument (AAL) has been installed at the Institute for Mineral Engineering at RWTH University in Aachen, Germany. The AAL employs acoustically stabilized gas jet levitation with laser-beam heating and melting to create a contact-free containerless environment for high temperature materials research. Contamination-free study of liquids is possible at temperatures in excess of 3000 °C and of undercooled liquids at temperatures far below the melting point.

Manufacturing of individual biodegradable bone substitute implants using selective laser melting technique.

The additive manufacturing technique selective laser melting (SLM) has been successfully proved to be suitable for applications in implant manufacturing. SLM is well known for metal parts and offers direct manufacturing of three-dimensional (3D) parts with high bulk density on the base of individual 3D data, including computer tomography models of anatomical structures. Furthermore, an interconnecting porous structure with defined and reproducible pore size can be integrated during the design of the 3D virtual model of the implant.

Synthesis of novel tricalcium phosphate-bioactive glass composite and functionalization with rhBMP-2.

A functionalization is required for calcium phosphate-based bone substitute materials to achieve an entire bone remodeling. In this study it was hypothesized that a tailored composite of tricalcium phosphate and a bioactive glass can be loaded sufficiently with rhBMP-2 for functionalization. A composite of 40 wt% tricalcium phosphate and 60 wt% bioactive glass resulted in two crystalline phases, wollastonite and rhenanite after sintering.

Subcritical crack growth behavior of dispersion oxide ceramics.

Zirconia (Y-TZP) is used as material for components of implants and prostheses because of its high short-term strength. The mechanical long-term reliability, however, is limited for Y-TZP because of hydrothermal aging effects and a pronounced tendency for subcritical crack growth. The hypothesis of this study was that a substantial amount of alumina in a zirconia matrix can help to significantly suppress subcritical crack growth and thereby improve the mechanical long-term reliability.

Cytocompatibility of high strength non-oxide ceramics.

Oxide ceramic materials like alumina (Al(2)O(3)) and zirconia (ZrO(2)) are frequently used for medical applications like implants and prostheses because of their excellent biocompatibility and high wear resistance. Unfortunately, oxide ceramics cannot be used for minimal invasive thin-walled implants like resurfacing hip prostheses because of their limited strength. The hypothesis of this study is that non-oxide ceramics like silicon nitride (Si(3)N(4)) and silicon carbide (SiC)-not previously used in the medical field-are not only high strength and mechanically reliable ceramic materials due to their high amount of covalent bonds, but also exhibit a suitable biocompatibility for use as medical implants and prostheses.

Chemical strengthening of a dental lithium disilicate glass-ceramic material.

Chemical strengthening of dental ceramics by ion exchange has hitherto only been confirmed for feldspathic porcelains. The objective of this study was to examine whether the strength of lithium disilicate glass-ceramics can be increased by ion exchange as well. A lithium disilicate glass-ceramic material was treated in different molten salts.

Hemocompatibility of high strength oxide ceramic materials: an in vitro study.

High strength oxide ceramic materials like alumina and zirconia are frequently used for artificial joints because of their biocompatibility and high wear resistance. Their suitability as materials for implants and biomedical devices with direct blood contact, such as cardiovascular implants or components for blood pumps and dialyzers, has not been confirmed to date. The objective of this study was to investigate whether oxide ceramics show sufficient hemocompatibility.

Bioactivation of inert alumina ceramics by hydroxylation.

Alumina ceramics (Al(2)O(3)) are frequently used for medical implants and prostheses because of the excellent biocompatibility, and the high mechanical reliability of the material. Inauspiciously alumina is not suitable for implant components with bone contact, because the material is bioinert and thereby no bony ongrowth, and subsequently loosening of the implant occurs. Here, we present a new method to bioactivate the surface of the material.