Scalable Non-Halogenated Co-solvent System for Large-Area, Four-Layer Slot-Die-Coated Organic Photovoltaics.

Sustainable processing solvents, photoactive materials, and scalable manufacturing will play a key role in commercializing printed organic photovoltaics (OPVs). The record-breaking pioneering OPV reports have done an outstanding job in accelerating the discovery of champion photoactive materials and device engineering practices; however, these works predominantly involve health-hazardous halogenated processing solvents/additives and non-scalable thin-film coating methods. Herein, large-area slot-die-manufactured OPV cells from eco-friendly halogen-free solvents and synthetically scalable materials are showcased.

Processing of Lead Halide Perovskite Thin Films Studied with In-Situ Real-Time X-ray Scattering.

Lead halide perovskites have been of paramount interest for solution-processable solar cells, reaching power conversion efficiencies larger than 25%. In this spotlight, we will provide a systematic overview of the influence of different solution-based processing routes of lead halide perovskites on their phase transformation and conversion as revealed through in-situ X-ray-scattering experiments. These experiments were performed in conditions closely mimicking thin film processing methods and conditions used for thin film solar cell device fabrication and therefore provide critical information about the mechanism of the phase transformation, its onset, the kinetics, as well as the emergence and disappearance of various (meso)phases along the way.

Zinc Oxide-Perylene Diimide Hybrid Electron Transport Layers for Air-Processed Inverted Organic Photovoltaic Devices.

In this work, we report the formation of perylene diimide films, from green solvents, for use as electron transporting layers, when combined with ZnO, in inverted-type organic photovoltaics. A modified N-annulated PDI was functionalized with a -butyloxycarbonyl protecting group to solubilize the material, enabling solution processing from green solvents. Post-deposition treatment of films thermal annealing cleaves the protecting group yielding the known PDIN-H material, rendering films solvent-resistant.

Implication of polymeric template agent on the formation process of hybrid halide perovskite films.

The use of polymeric additives supporting the growth of hybrid halide perovskites has proven to be a successful approach aiming at high quality active layers targeting optoelectronic exploitation. A detailed description of the complex process involving the self-assembly of the precursors into the perovskite crystallites in presence of the polymer is, however, still missing. Here we take starch:CHNHPbI (MAPbI) as example of highly performing composite, both in solar cells and light emitting diodes, and study the film formation process through differential scanning calorimetry and in situ time-resolved grazing incidence wide-angle x-ray scattering, performed during spin coating.

Compositional and Interfacial Engineering Yield High-Performance and Stable p-i-n Perovskite Solar Cells and Mini-Modules.

Through the optimization of the perovskite precursor composition and interfaces to selective contacts, we achieved a p-i-n-type perovskite solar cell (PSC) with a 22.3% power conversion efficiency (PCE). This is a new performance record for a PSC with an absorber bandgap of 1.

Facile and noninvasive passivation, doping and chemical tuning of macroscopic hybrid perovskite crystals.

Halide vacancies and associated metallic lead (Pb°) observed at the surface and deep inside macroscopic organolead trihalide perovskite crystals is removed through a facile and noninvasive treatment. Indeed, Br2 vapor is shown to passivate Br-vacancies and associated Pb° in the bulk of macroscopic crystals. Controlling the exposure time can markedly improve the overall stoichiometry for moderate exposures or introduce excessive bromide for long exposures, resulting in p-doping of the crystals.

Kinetic Stabilization of the Sol-Gel State in Perovskites Enables Facile Processing of High-Efficiency Solar Cells.

Perovskite solar cells increasingly feature mixed-halide mixed-cation compounds (FA MA Cs PbI Br ) as photovoltaic absorbers, as they enable easier processing and improved stability. Here, the underlying reasons for ease of processing are revealed. It is found that halide and cation engineering leads to a systematic widening of the anti-solvent processing window for the fabrication of high-quality films and efficient solar cells.

Lattice anchoring stabilizes solution-processed semiconductors.

The stability of solution-processed semiconductors remains an important area for improvement on their path to wider deployment. Inorganic caesium lead halide perovskites have a bandgap well suited to tandem solar cells but suffer from an undesired phase transition near room temperature. Colloidal quantum dots (CQDs) are structurally robust materials prized for their size-tunable bandgap; however, they also require further advances in stability because they are prone to aggregation and surface oxidization at high temperatures as a consequence of incomplete surface passivation.

Conducting and Stretchable PEDOT:PSS Electrodes: Role of Additives on Self-Assembly, Morphology, and Transport.

The addition of dimethylsulfoxide and Zonyl into poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) can be combined to achieve excellent electrical, optical, and mechanical properties. We demonstrate that it is possible to produce highly transparent conducting electrodes (FoM > 35) with low Young's modulus and high carrier density. We investigated the relationship between the transport properties of PEDOT:PSS and the morphology and microstructure of these films by performing Hall effect measurement, atomic force microscopy, and grazing incidence wide-angle X-ray scattering (GIWAXS).

Multi-inch single-crystalline perovskite membrane for high-detectivity flexible photosensors.

Single crystalline perovskites exhibit high optical absorption, long carrier lifetime, large carrier mobility, low trap-state-density and high defect tolerance. Unfortunately, all single crystalline perovskites attained so far are limited to bulk single crystals and small area wafers. As such, it is impossible to design highly demanded flexible single-crystalline electronics and wearable devices including displays, touch sensing devices, transistors, etc.

Compositional and orientational control in metal halide perovskites of reduced dimensionality.

Reduced-dimensional metal halide perovskites (RDPs) have attracted significant attention in recent years due to their promising light harvesting and emissive properties. We sought to increase the systematic understanding of how RDPs are formed. Here we report that layered intermediate complexes formed with the solvent provide a scaffold that facilitates the nucleation and growth of RDPs during annealing, as observed via in situ X-ray scattering.

2D matrix engineering for homogeneous quantum dot coupling in photovoltaic solids.

Colloidal quantum dots (CQDs) are promising photovoltaic (PV) materials because of their widely tunable absorption spectrum controlled by nanocrystal size. Their bandgap tunability allows not only the optimization of single-junction cells, but also the fabrication of multijunction cells that complement perovskites and silicon . Advances in surface passivation, combined with advances in device structures , have contributed to certified power conversion efficiencies (PCEs) that rose to 11% in 2016 .

Phase Transition Control for High Performance Ruddlesden-Popper Perovskite Solar Cells.

Ruddlesden-Popper reduced-dimensional hybrid perovskite (RDP) semiconductors have attracted significant attention recently due to their promising stability and excellent optoelectronic properties. Here, the RDP crystallization mechanism in real time from liquid precursors to the solid film is investigated, and how the phase transition kinetics influences phase purity, quantum well orientation, and photovoltaic performance is revealed. An important template-induced nucleation and growth of the desired (BA) (MA) Pb I phase, which is achieved only via direct crystallization without formation of intermediate phases, is observed.

Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation.

The trap states at grain boundaries (GBs) within polycrystalline perovskite films deteriorate their optoelectronic properties, making GB engineering particularly important for stable high-performance optoelectronic devices. It is demonstrated that trap states within bulk films can be effectively passivated by semiconducting molecules with Lewis acid or base functional groups. The perovskite crystallization kinetics are studied using in situ synchrotron-based grazing-incidence X-ray scattering to explore the film formation mechanism.

Enhanced Electrical Conductivity of Molecularly p-Doped Poly(3-hexylthiophene) through Understanding the Correlation with Solid-State Order.

Molecular p-doping of the conjugated polymer poly(3-hexylthiophene) (P3HT) with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is a widely studied model system. Underlying structure-property relationships are poorly understood because processing and doping are often carried out simultaneously. Here, we exploit doping from the vapor phase, which allows us to disentangle the influence of processing and doping.

Effects of High Temperature and Thermal Cycling on the Performance of Perovskite Solar Cells: Acceleration of Charge Recombination and Deterioration of Charge Extraction.

In this work, we investigated the effects of high operating temperature and thermal cycling on the photovoltaic (PV) performance of perovskite solar cells (PSCs) with a typical mesostructured (m)-TiO-CHNHPbICl-spiro-OMeTAD architecture. After temperature-dependent grazing-incidence wide-angle X-ray scattering, in situ X-ray diffraction, and optical absorption experiments were carried out, the thermal durability of PSCs was tested by subjecting the devices to repetitive heating to 70 °C and cooling to room temperature (20 °C). An unexpected regenerative effect was observed after the first thermal cycle; the average power conversion efficiency (PCE) increased by approximately 10% in reference to the as-prepared device.

Programmable and coherent crystallization of semiconductors.

The functional properties and technological utility of polycrystalline materials are largely determined by the structure, geometry, and spatial distribution of their multitude of crystals. However, crystallization is seeded through stochastic and incoherent nucleation events, limiting the ability to control or pattern the microstructure, texture, and functional properties of polycrystalline materials. We present a universal approach that can program the microstructure of materials through the coherent seeding of otherwise stochastic homogeneous nucleation events.

Hybrid Perovskite Thin-Film Photovoltaics: In Situ Diagnostics and Importance of the Precursor Solvate Phases.

Solution-processed hybrid perovskite semiconductors attract a great deal of attention, but little is known about their formation process. The one-step spin-coating process of perovskites is investigated in situ, revealing that thin-film formation is mediated by solid-state precursor solvates and their nature. The stability of these intermediate phases directly impacts the quality and reproducibility of thermally converted perovskite films and their photovoltaic performance.

Hybrid organic-inorganic inks flatten the energy landscape in colloidal quantum dot solids.

Bandtail states in disordered semiconductor materials result in losses in open-circuit voltage (V) and inhibit carrier transport in photovoltaics. For colloidal quantum dot (CQD) films that promise low-cost, large-area, air-stable photovoltaics, bandtails are determined by CQD synthetic polydispersity and inhomogeneous aggregation during the ligand-exchange process. Here we introduce a new method for the synthesis of solution-phase ligand-exchanged CQD inks that enable a flat energy landscape and an advantageously high packing density.

Analysis of the mouse 129-strain Nkrp1-Clr gene cluster reveals conservation of genomic organization and functional receptor-ligand interactions despite significant allelic polymorphism.

The Nkrp1 (Klrb) family of NK cell receptors and their genetically linked Clr (Clec2) ligands are conserved between rodents and humans. Nonetheless, certain mouse and rat Nkrp1 genes exhibit significant allelic polymorphism between inbred strains. We previously demonstrated that the Nkrp1-Clr recognition system is genetically and functionally conserved between the B6 and BALB/c strains, with focused sequence divergence evident in certain genes (e.