Thermomechanical and Structural Analysis of Manufactured Composite Based on Polyamide and Aluminum Recycled Material.

The paper presents an analysis of the filler's effect on the machining process and on changes in the thermomechanical properties of polymer composites based on aluminum chips. Composite research samples with a polymer matrix in the form of polyamide 6 were made by the pressing method. Comparative studies were carried out on the changes in thermomechanical properties and structure of the obtained molders with different filler contents and different fractions after the machining process.

Technological Aspects of Manufacturing and Control of Gears-Review.

Gear drives are widely used in various fields and applications due to their properties and capacity. Their versatility, durability, and ability to transmit high torques as well as precision and reliability make them extremely useful in many fields of technology. They are widely used in industrial and energy machinery, vehicle drive systems, aerospace, medical devices, and many other areas.

Analysis of the Impact of Changes in Thermomechanical Properties of Annealed Semi-Crystalline Plastics on the Surface Condition after the Machining Process.

In this paper, the authors present a comparative analysis of the thermomechanical properties of plastics intended for machining before and after the annealing process. The research included the dynamic properties, thermal analysis and a study of the surface after machining. The dynamic properties were tested using the DMTA method.

Research into Specific Mechanical Properties of Composites Produced by 3D-Printing Additive Continuous-Fiber Fabrication Technology.

This paper introduces novel research into specific mechanical properties of composites produced by 3D printing using Continuous-Fiber Fabrication (CFF). Nylon (Onyx) was used as the composite base material, while carbon constituted the reinforcement element. The carbon fiber embedment was varied in selected components taking values of 0°, 45°, 90°, and 135° for parts undergoing tensile testing, while one specific part type was produced combining all angles.

Technology of Manufacturing of ZC Cylindrical Worm.

Cylindrical worms are generally machined by the hobbing method using rotary tools, and they are formed in the finishing pass at the full profile height. In this case, the profile of the tool-action surface determines the profile of the machined surface, and for technological reasons, a rectilinear (less frequently circular) axial profile of the tool-action surface is generally assumed. In the currently known technology, machining takes place on special machine tools, and on tools that are specially prepared for a specific outline.

Analysis of Thermomechanical Properties and the Influence of Machining Process on the Surface Structure of Composites Manufactured from Metal Chips with a Polymer Matrix.

Nowadays, the dynamic development of the entire market of composite materials is noticeable, which is very often associated with the need to use waste or recycled materials in their production. In the process of producing composites themselves, the easy possibility of shaping their mechanical and thermomechanical properties becomes apparent, which can be a big problem for materials with a homogeneous structure. For the tests, samples made of a combination of acrylic-phenolic resin with fine aluminum and brass chips were used.

Experimental Method of Machining Gears with an Involute Profile Using CNC Lathe with Driven Tools.

There are many ways of machining gears; the world's manufacturers of machine tools have patented many methods that allow for the production of gears in an accurate and efficient way. In general, the patented methods require the use of kinematically complex and expensive CNC machine tools. These tools, moreover, the production of the technology itself, including the machining code, require the use of dedicated software.

Study of Machining of Gears with Regular and Modified Outline Using CNC Machine Tools.

Classic methods of machining cylindrical gears, such as hobbing or circumferential chiseling, require the use of expensive special machine tools and dedicated tools, which makes production unprofitable, especially in small and medium series. Today, special attention is paid to the technology of making gears using universal CNC (computer numerical control) machine tools with standard cheap tools. On the basis of the presented mathematical model, a software was developed to generate a code that controls a machine tool for machining cylindrical gears with straight and modified tooth line using the multipass method.

Analysis of the Impact of Changes in Thermomechanical Properties of Polymer Materials on the Machining Process of Gears.

This paper presents an analysis of the impact of modification of thermomechanical properties of polymer materials on the process of gear wheel machining on a CNC machine tool. Polymer materials Tecaflon (PVDA) and polyethylene (PE) were used for processing. The materials underwent thermal modification i.