Graphite-Phosphate Composites: Structure and Voltammetric Investigations.

The utilization of lithium-ion batteries (LIBs) is increasing sharply with the increasing use of mobile phones, laptops, tablets, and electric vehicles worldwide. Technologies are required for the recycling and recovery of spent LIBs. In the context of the circular economy, it is urgent to search for new methods to recycle waste graphite that comes from the retired electrode of LIBs.

The Effect of Calcium and Iron (III) Oxides on Lead Spent Plates: Spectroscopic, Voltametric, and EIS Investigations.

In this study, xCaO‧5FeO‧(95-x)Pb glasses and vitroceramics containing various concentrations of calcium ions (from 0 to 50 mol% CaO) were prepared using the spent anodic plate of a car battery. X-ray diffraction analysis revealed changes in the network structure as a function of CaO content. The intensities of the IR bands due to the sulfate and sulfite units were lowered, indicating a decrease in the sulfurization degree within the lead network.

Circular Economy of Construction and Demolition Waste for Nanocomposite Cement: XRD, NMR, Vickers, Voltammetric and EIS Characterization.

In this paper, we present the structural, mechanical and electrical properties of composite cement materials that can be widely used as substituent for cement. We start with the characterization of a composite cement sample using an analysis of X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) spectra. The measurements of the Vickers hardness, cyclic and sweep linear voltammetry and electrochemical impedance spectroscopy (EIS) of composite cement materials were also recorded.

Nanocomposites Derived from Construction and Demolition Waste for Cement: X-ray Diffraction, Spectroscopic and Mechanical Investigations.

In the production of cement, raw materials can be partially substituted by regenerable waste provided from glasses, construction and demolition waste in order to reduce the environmental problem and burden of landfills. In this study, limestone-silicate composites were synthesized using starting materials such as glass waste and lime, brick, autoclaved aerated concrete (ACC), mortar or plaster waste. The structure and mechanical properties of the nano-composite materials have been studied.

Physico-chemical characterization and possible uses of sludge processed from an urban sewage treatment plant.

Nowadays, the challenge is to transform dehydrated sewage sludge resulting from wastewater treatment plants from waste into resource. Following this objective, the sludge was further dried and submitted to X-ray diffraction (XRD) and FTIR analysis. The sludge was first dried in ventilated and unventilated spaces at 50 C and 100 C, for 60 and 100 minutes (min) in each case.

Development of Iron-Silicate Composites by Waste Glass and Iron or Steel Powders.

There is growing interest in the opportunities regarding construction and demolition wastes, such as glass and metal powders, for developing a circular economy and their transformation into new materials. This management and recycling of construction and demolition waste offers environmental benefits and conservation of natural resources. In this paper, new magnetic composite materials were prepared by wet chemical synthesis methods using crushed glasses and iron and steel waste powders as raw materials.

Recycled and Nickel- or Cobalt-Doped Lead Materials from Lead Acid Battery: Voltammetric and Spectroscopic Studies.

The active mass of the plates of aspent car battery with higher wear after an efficient desulfatization can be used as sources of a new electrode. This paper proposes the recycling of spent electrodes from a lead acid battery and the incorporation of NiO or CoO contents by the melt-quenching method in order to enrich the electrochemical properties. The analysis of X-ray diffractograms indicates the gradual decrease in the sulfated crystalline phases, respectively, 4PbO·PbSO and PbO·PbSO phases, until their disappearance for higher dopant concentrations.

Nanocomposites as Substituent of Cement: Structure and Mechanical Properties.

To date, the scientific research in the field of recycling of construction and demolition wastes was focused on the production of concrete, cements, and bricks. The attainment of these products was limited to the addition of suitable binder contents, such as lime or cement, compaction, and possibly heat treatment, without a concrete recycling method. In this paper, new cement materials consisting of 2.

Natrium Diacid Phosphate-Manganese-Lead Vitroceramics Obtained from Spent Electrodes.

NaHPO-MnO-PbO-Pb vitroceramics were studied usinginfrared (IR), ultraviolet-visible (UV-Vis) and electron paramagnetic resonance (EPR) spectroscopies to understand the structural modifications as potential candidates for electrode materials. The electrochemical performances of the NaHPO-MnO-PbO-Pb materials were investigated through measurements of cyclic voltammetry. Analysis of the results indicates that doping with a suitable content of MnO and NaHPO removes hydrogen evolution reactions and produces a partial desulphatization of the anodic and cathodic plates of the spent lead acid battery.

Structural, Optical, and Magnetic Studies of the Metallic Lead Effect on MnO-Pb-PbO Vitroceramics.

MnO-lead materials have attracted attention in their applications as electrodes. This work reports a detailed spectroscopic study of the compositional variation of MnO-xLead vitroceramic materials with varied Pb contents. The concentration variation of lead and manganese ions issystematically characterized throughthe analysis of X-ray diffraction (XRD), Fourier transform infrared (FTIR), ultraviolet-visible (UV-Vis), and electron paramagnetic resonance (EPR) spectroscopy.

XANES, EXAFS, Voltammetric, and Microhardness Studies of Manganese Dioxide-Lead-Lead Dioxide Vitroceramics.

In this work we investigated the electrochemical performances and mechanical behavior of the manganese dioxide-lead dioxide-lead vitreous system. The structural and electrochemical properties of vitroceramics were investigated by the analysis of X-ray diffraction (XRD) spectra, X-ray absorption spectroscopy (XAS), and measurements of cyclic voltammetry and linear sweep voltammetry. The mechanical properties of the studied samples were determined by Vickers hardness values using the indentation method.

Advanced zirconia ceramics stabilized with yttria and magnesia: Structure and Vickers microhardness.

The samples 8YSZ containing 70, 75, 80 mol% ZrO and other oxides were prepared by. a high temperature solid state reaction process. Using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and spectroscopic methods were evaluated the effect of oxide addition on the properties of yttria-doped zirconia.

Stabilized zirconia ceramics for dental applications.

The research is aiming to obtain at room temperature a new ceramic material containing partially stabilized zirconia with different oxides after sintering used for dental and other technological purposes. Our research proposes a new method based on the use of stabilized zirconia with other oxides to obtain optimized dental material with a lower cost price and / or improved properties to allow wider use of these products to an increased number of patients in dental offices. X-ray diffraction, SEM analysis.

Characteristics and local structure of hafnia-silicate-zirconate ceramic nanomixtures.

Zirconate systems having the composition 3HfO·15SiO·xYO·(82 - x)ZrO, where x = 2, 7 and 12 mol% YO, were synthesized by a sol-gel method. The analysis of X-ray diffraction data showed the presence of the t-ZrO, m-ZrO, m-HfO, YSiO and YSiO crystalline phases in a ceramic nanomixture. Spectroscopic data show that the increase of the YO content of samples determines the increase of the t-ZrO, m-HfO and silicate crystalline phases.

Night shift work surrounding pregnancy and offspring risk of atopic disease.

Background: Night shift work surrounding pregnancy may contribute to the risk of developing atopic diseases in offspring due to alterations in the prenatal environment, from stress.

Objective: To examine the association of maternal night shift work surrounding pregnancy and offspring risk of developing atopic diseases from childhood to adolescence.

Methods: We examined the association between night shift work before and during pregnancy among 4,044 mothers in the Nurses' Health Study II (NHSII) and atopic dermatitis, asthma and hay fever risk in 4,813 of their offspring enrolled in the Growing Up Today Study (GUTS).

Species-specific habitat preferences do not shape the structure of a crested newt hybrid zone ( x ).

Reproductive isolation barriers maintain the integrity of species by preventing interspecific gene flow. They involve temporal, habitat or behavioral isolation acting before fertilization, and postzygotic isolation manifested as hybrid mortality or sterility. One of the approaches of how to study reproductive isolation barriers is through the analysis of hybrid zones.

Concordance of three alternative gestational age assessments for pregnant women from four African countries: A secondary analysis of the MIPPAD trial.

Background: At times, ultrasound is not readily available in low resource countries in Africa for accurate determination of gestational age, so using alternative methods is pivotal during pregnancy. These assessments are used to aid the risk analysis for an infant and management strategies for premature delivery, if necessary. Currently, date of last menstrual period, fundal height measurements, and the New Ballard Score are commonly used in resource-limited settings.

The network modifier and former role of the bismuth ions in the bismuth-lead-germanate glasses.

The present work is focused on the enhancement of network former environment in lead-germanate glasses by bismuth ions doping. A series of bismuth-lead-germanate glasses with the xBi2O3·(100-x)[7GeO2·3PbO] composition glass where 0≤x≤30 mol% Bi2O3 were synthesized by melt-quenching method. The FTIR, UV-VIS spectroscopy and cyclic voltammetry were conducted on these samples to evaluate the doping effect of structure of the host matrix network.

Effect of aluminum oxide codoping on copper-lead-germanate glasses.

Glasses from xCuO⋅(100-x)[7GeO(2)⋅3PbO(2)⋅0.05Al(2)O(3)] system where x=0, 1, 5, 10, 20 and 30 mol% CuO were studied by FT-IR, UV-VIS and ESR spectroscopy in order to obtain information about the structural correlations and the relationship between structure and optical properties in these materials. The analyses of these IR spectra reveal that the accommodation of the network with the excess of oxygen ions is possible by the depolymerization of the germanate network in shorter chains, especially ortho- and/or pyrogermanate structural units.

Structural study of ternary iron-lead-germanate glass ceramics.

Glass ceramics with the composition xFe(2)O(3)·(100-x)[7GeO(2)·3PbO(2)] where 0≤x≤60 mol% were obtained and studied using XRD, FTIR and UV-vis spectroscopy investigations. Heat treatment of glass samples at 400°C for 8 h led to the formation of α, γ-PbGe(4)O(9), Pb(3)Fe(2)Ge(4)O(14) and PbO(1.44) crystalline phases.

Dinuclear manganese centers in the manganese-lead-tellurate glasses.

FTIR, UV-VIS and EPR spectra of manganese doped lead-tellurate glasses with composition xMnO·(100-x)[4TeO2·PbO2] where x=0, 1, 5, 10, 20, 30, 40mol% have been studied. The FTIR spectra show the formation of the Mn-O-Pb and Mn-O-Te bridging bonds by increasing of MnO concentration. The UV-VIS spectra show the Mn(+3) species exhibit pronounced absorption, which masks the Mn(+2) spin-forbidden absorption bands when Mn(+2) ions are in high concentrations in these glasses.

FTIR, Raman, and UV-Vis spectroscopic and DFT investigations of the structure of iron-lead-tellurate glasses.

In this work, the effects of iron ion intercalations on lead-tellurate glasses were investigated via FTIR, Raman and UV-Vis spectroscopies. This homogeneous glass system has compositions xFe(2)O(3)·(100-x)[4TeO(2)·PbO(2)], where x = 0-60 mol%. The presented observations in these mechanisms show that the lead ions have a pronounced affinity towards [TeO(3)] structural units, resulting in the deformation of the Te-O-Te linkages, and leading to the intercalation of [PbO( n )] (n = 3, 4) and [FeO( n )] (n = 4, 6) entities in the [TeO(4)] chain network.

Structural properties of molybdenum-lead-borate glasses.

Glasses and glass ceramics in the system xMoO₃·(100 - x)[3B₂O₃·PbO] with 0 ≤ x ≤ 30 mol% have been prepared from melt quenching method and characterized by means of X-ray diffraction, FTIR, UV-VIS and EPR spectroscopy. We have examined and analyzed the effects of systematic molybdenum ions intercalation on lead-borate glasses and glass ceramics with interesting results. The observations present in these mechanisms show the lead ions bonded ionic have a strong affinity towards [BO₃] units containing non-bridging oxygens and [MoO₄]²⁻ molybdate units.

Experimental and theoretical investigations on the structure-properties interrelationship of the gadolinium-vanadate-germanate glasses.

Glasses in the system xGd₂O₃·(100-x)[GeO₂·V₂O₅] with 0 ≤ x ≤ 20 mol% have been prepared from the melt quenching method. In this paper, we investigated changes in germanium coordination number in gadolinium-vanadate-germanate glasses through molar volume analysis, measurements of densities, investigations of FTIR and UV-VIS spectroscopy, calculations of density functional theory (DFT). Analyzing the structural changes resulted from the IR spectra we found that the gadolinium ions have a pronounced affinity toward [VO₄] structural units which contain non-bridging oxygens necessary for the charge compensation.

Experimental and theoretical studies of the structure of tellurate-borate glasses network.

The structural properties of the xTeO(2) x (1-x)B(2)O(3) glasses (x = 0.6; 0.7) were investigated by FT-IR spectroscopy.