Microbubble-enhanced dielectric barrier discharge pretreatment of microcrystalline cellulose.

Cellulose recalcitrance is one of the major barriers in converting renewable biomass to biofuels or useful chemicals. A pretreatment reactor that forms a dielectric barrier discharge plasma at the gas-liquid interface of the microbubbles has been developed and tested to pretreat α-cellulose. Modulation of the plasma discharge provided control over the mixture of species generated, and the reactive oxygen species (mainly ozone) were found to be more effective in breaking-up the cellulose structure compared to that of the reactive nitrogen species.

Preparation of Microcrystals of Piroxicam Monohydrate by Antisolvent Precipitation via Microfabricated Metallic Membranes with Ordered Pore Arrays.

Microcrystals of piroxicam (PRX) monohydrate with a narrow size distribution were prepared from acetone/PRX solutions by antisolvent crystallization via metallic membranes with ordered pore arrays. Crystallization was achieved by controlled addition of the feed solution through the membrane pores into a well-stirred antisolvent. A complete transformation of an anhydrous form I into a monohydrate form of PRX was confirmed by Raman spectroscopy and differential scanning calorimetry.

Encapsulation and Controlled Release of Rapamycin from Polycaprolactone Nanoparticles Prepared by Membrane Micromixing Combined with Antisolvent Precipitation.

Rapamycin-loaded polycaprolactone nanoparticles (RAPA-PCL NPs) with a polydispersity index of 0.006-0.073 were fabricated by antisolvent precipitation combined with micromixing using a ringed stainless steel membrane with 10 μm diameter laser-drilled pores.

Polycaprolactone multicore-matrix particle for the simultaneous encapsulation of hydrophilic and hydrophobic compounds produced by membrane emulsification and solvent diffusion processes.

Co-encapsulation of drugs in the same carrier, as well as the development of microencapsulation processes for biomolecules using mild operating conditions, and the production of particles with tailored size and uniformity are major challenges for encapsulation technologies. In the present work, a suitable method consisting of the combination of membrane emulsification with solvent diffusion is reported for the production of multi-core matrix particles with tailored size and potential application in multi-therapies. In the emulsification step, the production of a W/O/W emulsion was carried out using a batch Dispersion Cell for formulation testing and subsequently a continuous azimuthally oscillating membrane emulsification system for the scaling-up of the process to higher capacities.

Hydrothermal carbonisation of sewage sludge: effect of process conditions on product characteristics and methane production.

Hydrothermal carbonisation of primary sewage sludge was carried out using a batch reactor. The effect of temperature and reaction time on the characteristics of solid (hydrochar), liquid and gas products, and the conditions leading to optimal hydrochar characteristics were investigated. The amount of carbon retained in hydrochars decreased as temperature and time increased with carbon retentions of 64-77% at 140 and 160°C, and 50-62% at 180 and 200°C.