Non-Destructive Characterization of Industrial Membrane Cartridges by Using Liquid-Liquid Displacement Porosimetry (LLDP).

This works aims to propose and demonstrate the accuracy of a novel method of characterization aimed for non-destructive analysis of microfiltration (MF) membrane cartridges. The method adapts conventional liquid-liquid displacement porosimetry (LLDP) for performing an in-line porosimetric analysis of the membrane cartridges, getting their pore size distributions (PSDs) and mean pore diameters (). Six commercial filtration cartridges featuring polyethersulfone (PES) pleated membranes were analyzed using a newly designed filtration rig, based on the liquid-liquid displacement porometer, developed at the Institut de la Filtration et des Techniques Séparatives (IFTS) and operated at constant flow.

Critical flux and chemical cleaning-in-place during the long-term operation of a pilot-scale submerged membrane bioreactor for municipal wastewater treatment.

The critical flux and chemical cleaning-in-place (CIP) in a long-term operation of a pilot-scale submerged membrane bioreactor for municipal wastewater treatment were investigated. Steady filtration under high flux (30 L/(m(2) h)) was successfully achieved due to effective membrane fouling control by sub-critical flux operation and chemical CIP with sodium hypochlorite (NaClO) in both trans-membrane pressure (TMP) controlling mode (cleaning with high concentration NaClO of 2000-3000 mg/L in terms of effective chorine was performed when TMP rose to 15 kPa) and time controlling mode (cleanings were performed weekly and monthly respectively with low concentration NaClO (500-1000 mg/L) and high concentration NaClO (3000 mg/L)). Microscopic analysis on membrane fibers before and after high concentration NaClO was also conducted.

Better understanding of the filtration characteristics in the flexible fibre filter module (3FM).

This study is about the particle retention and filtration characteristics of fibre filter. Four laboratory scale fibre filters with different heights were used in parallel at various packing densities and filtration velocities. Of all of the operating parameters studied, filtration velocity had the most influence.

Enhancing flexible fiber filter (3FM) performance using in-line coagulation.

A new packing for deep bed filtration using Flexible Fibers has been proposed and developed on a very large scale for tertiary treatment of wastewater. The purpose of this study is to check the possibility of using this technology for the production of drinking water from surface water. In this study, the feasibility of the fiber filter application on water treatment was examined and the removal efficiency of fiber filter was improved using an in-line coagulant injection method.

Application of an automation system and a supervisory control and data acquisition (SCADA) system for the optimal operation of a membrane adsorption hybrid system.

The application of automation and supervisory control and data acquisition (SCADA) systems to municipal water and wastewater treatment plants is rapidly increasing. However, the application of these systems is less frequent in the research and development phases of emerging treatment technologies used in these industries. This study involved the implementation of automation and a SCADA system to the submerged membrane adsorption hybrid system for use in a semi-pilot scale research project.