Synthesis of Nano Sulfur/Chitosan-Copper Complex and Its Nematicidal Effect against Meloidogyne incognita In Vitro and on Coffee Pots.

Sulfur is one of the inorganic elements used by plants to develop and produce phytoalexin to resist certain diseases. This study reported a method for preparing a material for plant disease resistance. Sulfur nanoparticles (SNPs) stabilized in the chitosan-Cu2+ (CS-Cu2+) complex were synthesized by hydrolysis of Na2S2O3 in an acidic medium.

Oral hygiene status and oral care motivation in children aged 7-9 years in a Vietnam primary school: A cross-sectional study.

Introduction: Oral hygiene is a crucial factor in oral health, especially in children. To increase the awareness of oral care behaviour among children, oral care motivation plays a critical role in daily dental practices. Therefore, this cross-sectional study was conducted to investigate the current oral hygiene status and evaluate the association between oral care motivation and oral hygiene index in 7-9-year-old children at Primary School in Hanoi, Vietnam.

Structural and functional features of asthma participants with fixed airway obstruction using CT imaging and 1D computational fluid dynamics: A feasibility study.

Asthma with fixed airway obstruction (FAO) is associated with significant morbidity and rapid decline in lung function, making its treatment challenging. Quantitative computed tomography (QCT) along with data postprocessing is a useful tool to obtain detailed information on airway structure, parenchymal function, and computational flow features. In this study, we aim to identify the structural and functional differences between asthma with and without FAO.

Antibacterial Activity against and Cytotoxicity of Maillard Reaction Product of Chitosan and Glucosamine Prepared by Gamma Co-60 Ray Irradiation.

In this study, the gamma ray-induced Maillard reaction method was carried out for chitosan (CTS) and glucosamine (GA) to improve the water solubility and antibacterial activity. The mixture solution of CTS and GA was exposed to gamma rays at a dose of 25 kGy and freeze-dried to obtain a Maillard reaction product (MRP) powder. The physicochemical and biological properties of the CTS-GA MRP powder were investigated.

A high-performance method for quantitation of aflatoxins B1, B2, G1, G2: Full validation for raisin, peanut matrices, and survey of related products at Ho Chi Minh City.

Optimization and validation for simultaneous quantitation of four aflatoxins B1, B2, G1, and G2 in peanuts and raisins were performed on ultra-performance liquid chromatography in a combination of fluorescence detector, without derivatization. The advantages were short analysis time, simple sample handling, and reduced solvent consumption. Instrument detection limits of AFB1, AFB2, AFG1, and AFG2 were 0.

Preparation of water-soluble chitosan oligosaccharides by oxidative hydrolysis of chitosan powder with hydrogen peroxide.

Chitosan (CS) is only soluble in weak acid medium, thereby limiting its wide utilisation in the field of biomedicine, food, and agriculture. In this report, we present a method for preparing water-soluble CS oligosaccharides (COSs) at high concentration (∼10%, w/v) via the oxidative hydrolysis of CS powder with molecular weight (Mw) ∼90,000 g/mol) in 2% HO solution at ambient temperature by a two-step process, namely, the heterogeneous hydrolysis step and homogeneous hydrolysis step. The resultant COSs were characterised by gel permeation chromatography (GPC), fourier transforms infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-Vis), proton nuclear magnetic resonance spectroscopy (H NMR) and X-ray diffraction (XRD) spectroscopy.

Analytical techniques for determination of heavy metal migration from different types of locally made plastic food packaging materials using ICP-MS.

Plastic food packaging is an essential element for customer convenience and the preservation of food quality. Nonetheless, heavy metals in the packaging materials, either intentionally or nonintentionally added, can be transferred to the food. Therefore, determining heavy metal contents in these packaging materials is essential.

Highly Sensitive Molecularly Imprinted Polymer-Based Electrochemical Sensors Enhanced by Gold Nanoparticles for Norfloxacin Detection in Aquaculture Water.

The overuse of antibiotics in aquaculture and pharmaceuticals and their subsequent leaking into the environment have been demonstrated to be a potential route for creating antibiotic resistance in bacteria. In order to assess the impact of this problem and take regulatory measures, it is necessary to develop tools that allow for the detection of antibiotics in environmental samples in a routine, low-cost manner. In this study, we integrated gold nanoparticles (AuNPs) into a molecularly imprinted polymer (MIP) membrane to fabricate a new sensor for the detection of norfloxacin in pharmaceuticals and aquaculture samples.

Plastic waste as a valuable resource: strategy to remove heavy metals from wastewater in bench scale application.

Single-use plastic waste is gradually considered a potential material for circular economy. Ion exchange resin obtained from polystyrene waste by sulfonating with HSO was used for heavy metal removal from electroplating wastewater. Batch mode experiments of Cu, Zn, and Cd were carried out to determine effect of pH, initial concentration, equilibrium time, and the isotherm and kinetic parameters; the stability of the resin in continuous operation was then evaluated.

Principles of Small-Molecule Transport through Synthetic Nanopores.

Synthetic nanopores made from DNA replicate the key biological processes of transporting molecular cargo across lipid bilayers. Understanding transport across the confined lumen of the nanopores is of fundamental interest and of relevance to their rational design for biotechnological applications. Here we reveal the transport principles of organic molecules through DNA nanopores by synergistically combining experiments and computer simulations.

Chemical composition and antibacterial activities of essential oils from rhizomes and aerial parts of (Araceae).

In this study, the phytochemical composition and antibacterial activity of the essential oils isolated from the rhizomes and the aerial parts of were analysed for the first time using gas chromatography-mass spectrometry (GC-MS) and disk diffusion method. Consequently, 36 constituents were reported from rhizomes, including linalool (57.4%), terpinen-4-ol (10.

Metal-Organic Frameworks Reinforce the Carbon Nanotube Sponge-Derived Robust Three-Dimensional Sulfur Host for Lithium-Sulfur Batteries.

Sulfur is a prospective material for next-generation batteries with high theoretical capacity, but its drawbacks hinder its commercialization. To overcome the low conductivity of natural sulfur and the shuttle effect of lithium polysulfide, the study proposes a novel sulfur film coated with three-dimensional nitrogen and cobalt-codoped polyhedral carbon wrapped on a multiwalled carbon nanotube sponge (3D-S@NCoCPC sponge) composite as a high-performance cathode material for rechargeable lithium-sulfur batteries. The interconnected conductive carbon network with abundant pores provides more room for the homogeneous distribution of sulfur within the composite and creates a favorable pathway for electrolyte permeability and lithium-ion diffusion.

LiLaZrO Garnet Solid Polymer Electrolyte for Highly Stable All-Solid-State Batteries.

All-solid-state batteries have gained significant attention as promising candidates to replace liquid electrolytes in lithium-ion batteries for high safety, energy storage performance, and stability under elevated temperature conditions. However, the low ionic conductivity and unsuitability of lithium metal in solid polymer electrolytes is a critical problem. To resolve this, we used a cubic garnet oxide electrolyte (LiLaZrO - LLZO) and ionic liquid in combination with a polymer electrolyte to produce a composite electrolyte membrane.

Baseline assessment of microplastic concentrations in marine and freshwater environments of a developing Southeast Asian country, Viet Nam.

In aquatic environments, assessment of microplastic concentrations is increasing worldwide but environments from developing countries remain under-evaluated. Due to disparities of facilities, financial resources and human resources between countries, protocols of sampling, analysis and observations used in developed countries cannot be fully adapted in developing ones, and required specific adaptations. In Viet Nam, an adapted methodology was developed and commonly adopted by local researchers to implement a microplastic monitoring in sediments and surface waters of 21 environments (rivers, lakes, bays, beaches) of eight cities or provinces.

Enhanced Lithium Ion Storage by Titanium Dioxide Addition to Zinc Telluride-Based Alloy Composites.

A nanostructured ZnTe-TiO₂-C composite is synthesized, via a two-step high-energy mechanical milling process, for use as a new promising anode material in Li-ion batteries (LIBs). X-ray diffraction and X-ray photoelectron spectroscopy results confirm the successful formation of ZnTe alloy and rutile TiO₂ phases in the composites using ZnO, Te, Ti, and C as the starting materials. Scanning electron microscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy mapping measurements further reveal that ZnTe and TiO₂ nanocrystals are uniformly dispersed in an amorphous carbon matrix.

Enhanced Cycle Stability of Zinc Sulfide Anode for High-Performance Lithium-Ion Storage: Effect of Conductive Hybrid Matrix on Active ZnS.

Zinc sulfide (ZnS) nanocrystallites embedded in a conductive hybrid matrix of titanium carbide and carbon, are successfully fabricated via a facile high-energy ball-milling (HEBM) process. The structural and morphological analyses of the ZnS-TiC-C nanocomposites reveal that ZnS and TiC nanocrystallites are homogeneously distributed in an amorphous carbon matrix. Compared with ZnS-C and ZnS composites, the ZnS-TiC-C nanocomposite exhibits significantly improved electrochemical performance, delivering a highly reversible specific capacity (613 mA h g over 600 cycles at 0.

High Lithium Ion Transport Through rGO-Wrapped LiNiCoMnO Cathode Material for High-Rate Capable Lithium Ion Batteries.

In this work, we show an effective ultrasonication-assisted self-assembly method under surfactant solution for a high-rate capable rGO-wrapped LiNiCoMnO (Ni-rich cathode material) composite. Ultrasonication indicates the pulverization of the aggregated bulk material into primary nanoparticles, which is effectively beneficial for synthesizing a homogeneous wrapped composite with rGO. The cathode composite demonstrates a high initial capacity of 196.

Functional Nanostructured Oligochitosan⁻Silica/ Carboxymethyl Cellulose Hybrid Materials: Synthesis and Investigation of Their Antifungal Abilities.

Functional hybrid materials were successfully synthesized from low-cost waste products, such as oligochitosan (OCS) obtained from chitosan (one of the main components in crab shells) and nanosilica (nSiO₂) obtained from rice husk, in a 1:1 ratio (/), and their dispersion in the presence of carboxymethyl cellulose at pH 7 was stable for over one month without aggregation. The molecular weights, chemical structures, morphologies, and crystallinities of the obtained materials were characterized by GPC, FTIR, TEM, and XRD, respectively. The antifungal effects of OCS, nSiO₂, and the OCS/nSiO hybrid materials were investigated via a disk-diffusion method.

MoS₂-TiC-C Nanocomposites as New Anode Materials for High-Performance Lithium-Ion Batteries.

The MoS₂-TiC-C nanocomposite was prepared by high-energy ball milling (HEBM) for application as a new anode material for lithium-ion batteries. Pure molybdenum disulfide (MoS₂), Ti, and carbon black (C) were used as the starting materials for the synthesis process. Various analyses including X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) revealed that the nanosized MoS₂ active materials were uniformly dispersed in a TiC-C matrix formed via the HEBM process.

Transparent Nanopore Cavity Arrays Enable Highly Parallelized Optical Studies of Single Membrane Proteins on Chip.

Membrane proteins involved in transport processes are key targets for pharmaceutical research and industry. Despite continuous improvements and new developments in the field of electrical readouts for the analysis of transport kinetics, a well-suited methodology for high-throughput characterization of single transporters with nonionic substrates and slow turnover rates is still lacking. Here, we report on a novel architecture of silicon chips with embedded nanopore microcavities, based on a silicon-on-insulator technology for high-throughput optical readouts.

Effect of oligochitosan and oligo-β-glucan supplementation on growth, innate immunity, and disease resistance of striped catfish (Pangasianodon hypophthalmus).

Oligochitosan (COS) and oligo-β-glucan (βOG) were prepared by gamma Co-60 irradiation of chitosan/H O and β-glucan/H O solutions. The striped catfish (Pangasianodon hypophthalmus) was fed diets containing 0-200 mg COS, βOG, and a mixture of COS/βOG per kg feed for 45 days, and then challenged with Edwardsiella ictaluri bacterium. The effects of supplemented COS, βOG, and a mixture of COS/βOG on immune stimulation and growth performance in striped catfish were investigated.

Transport properties of track-etched membranes having variable effective pore-lengths.

The transport rate of molecules through polymeric membranes is normally limited because of their micrometer-scale thickness which restricts their suitability for more practical application. To study the effect of effective pore length on the transport behavior, polymer membranes containing cylindrical and asymmetric-shaped nanopores were prepared through a two-step ion track-etching technique. Permeation experiments were performed separately to investigate the transport properties (molecular flux and selectivity) of these track-etched membranes.

Measurement of MMP-9 and -12 degraded elastin (ELM) provides unique information on lung tissue degradation.

Background: Elastin is an essential component of selected connective tissues that provides a unique physiological elasticity. Elastin may be considered a signature protein of lungs where matrix metalloprotease (MMP) -9-and -12, may be considered the signature proteases of the macrophages, which in part are responsible for tissue damage during disease progression. Thus, we hypothesized that a MMP-9/-12 generated fragment of elastin may be a relevant biochemical maker for lung diseases.

MMP mediated degradation of type VI collagen is highly associated with liver fibrosis--identification and validation of a novel biochemical marker assay.

Background And Aims: During fibrogenesis, in which excessive remodeling of the extracellular matrix occurs, both the quantity of type VI collagen and levels of matrix metalloproteinases, including MMP-2 and MMP-9, increase significantly. Proteolytic degradation of type VI collagen into small fragments, so-called neo-epitopes, may be specific biochemical marker of liver fibrosis. The aim of this study was to develop an ELISA detecting a fragment of type VI collagen generated by MMP-2 and MMP-9, and evaluate this assay in two preclinical models of liver fibrosis.

Metal ion affinity-based biomolecular recognition and conjugation inside synthetic polymer nanopores modified with iron-terpyridine complexes.

Here we demonstrate a novel biosensing platform for the detection of lactoferrin (LFN) via metal-organic frameworks, in which the metal ions have accessible free coordination sites for binding, inside the single conical nanopores fabricated in polymeric membrane. First, monolayer of amine-terminated terpyridine (metal-chelating ligand) is covalently immobilized on the inner walls of the nanopore via carbodiimide coupling chemistry. Second, iron-terpyridine (iron-terPy) complexes are obtained by treating the terpyridine modified-nanopores with ferrous sulfate solution.