Cross-Linked Gel Electrolytes with Self-Healing Functionalities for Smart Lithium Batteries.

Next-generation Li-ion batteries must guarantee improved durability, quality, reliability, and safety to satisfy the stringent technical requirements of crucial sectors such as e-mobility. One breakthrough strategy to overcome the degradation phenomena affecting the battery performance is the development of advanced materials integrating smart functionalities, such as self-healing units. Herein, we propose a gel electrolyte based on a uniform and highly cross-linked network, hosting a high amount of liquid electrolyte, with multiple advantages: (i) autonomous, fast self-healing, and a promising PF-scavenging role; (ii) solid-like mechanical stability despite the large fraction of entrapped liquid; and (iii) good Li transport.

The Electrical Response of Real Dielectrics: Using the Voltage Ramp Method as a Straightforward Diagnostic Tool for Polymeric Composites.

An experimental method exploiting the capacitive response of most materials is here revised. The procedure called the "Voltage Ramp Method" (VRM) is based on applying proper voltage ramp cycles over time and measuring electrical current intensity flowing through the material sample. In the case of an ideal capacitor, a current plateau should be easily measured, and the capacitance value precisely determined.

Cathode Active Material Recycling from Spent Lithium Batteries: A Green (Circular) Approach Based on Deep Eutectic Solvents.

The transition to a circular economy vision must handle the increasing request of metals required to satisfy the battery industry; this can be obtained by recycling and feeding back secondary raw materials recovered through proper waste management. Here, a novel and green proof-of-concept was developed, based on deep eutectic solvents (DESs) to fully and easily recover valuable metals from various cathode active materials, including LiMn O , LiNi Mn O , and LiNi Co O . DES composed of choline chloride and lactic acid could leach Li, Mn, Co, and Ni, achieving efficiency of 100 % under much milder conditions with respect to the previous literature.

Li Dynamics of Liquid Electrolytes Nanoconfined in Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) are excellent platforms to design hybrid electrolytes for Li batteries with liquid-like transport and stability against lithium dendrites. We report on Li dynamics in quasi-solid electrolytes consisting in Mg-MOF-74 soaked with LiClO-propylene carbonate (PC) and LiClO-ethylene carbonate (EC)/dimethyl carbonate (DMC) solutions by combining studies of ion conductivity, nuclear magnetic resonance (NMR) characterization, and spin relaxometry. We investigate nanoconfinement of liquid inside MOFs to characterize the adsorption/solvation mechanism at the basis of Li migration in these materials.

Autonomous Self-Healing Strategy for Stable Sodium-Ion Battery: A Case Study of Black Phosphorus Anodes.

Autonomic self-healing (SH), namely, the ability to repair damages from mechanical stress spontaneously, is polarizing attention in the field of new-generation electrochemical devices. This property is highly attractive to enhance the durability of rechargeable Li-ion batteries (LIBs) or Na-ion batteries (SIBs), where high-performing anode active materials (silicon, phosphorus, ) are strongly affected by volume expansion and phase changes upon ion insertion. Here, we applied a SH strategy, based on the dynamic quadruple hydrogen bonding, to nanosized black phosphorus (BP) anodes for Na-ion cells.

Lithiation Mechanism in High-Entropy Oxides as Anode Materials for Li-Ion Batteries: An Operando XAS Study.

High-entropy oxides based on transition metals, such as MgCoNiCuZnO (TM-HEO), have recently drawn special attention as potential anodes in lithium-ion batteries due to high specific capacity and cycling reversibility. However, the lithiation/delithiation mechanism of such systems is still controversial and not clearly addressed. Here, we report on an operando XAS investigation into TM-HEO-based anodes for lithium-ion cells during the first lithiation/delithiation cycle.

Is It Possible to Obtain Solvent-Free, Li -Conducting Solid Electrolytes Based on Pure PVdF? Comment on "Self-Suppression of Lithium Dendrite in All-Solid-State Lithium Metal Batteries with Poly(vinylidene difluoride)-Based Solid Electrolytes".

Is It Possible to Obtain Solvent-Free, Li -Conducting Solid Electrolytes Based on Pure PVdF? Comment on "Self-Suppression of Lithium Dendrite in All-Solid-State Lithium Metal Batteries with Poly(vinylidene difluoride)-Based Solid Electrolytes".

Photosynthetic microbial fuel cell with polybenzimidazole membrane: synergy between bacteria and algae for wastewater removal and biorefinery.

Here, we demonstrate a very efficient simultaneous approach of bioenergy generation from wastewater and added-value compounds production by using a photosynthetic microalgae microbial fuel cells (PMFC), based on polybenzimidazole (PBI) composite membrane as separator. The use of PBI was proved to be very promising, even more convenient than Nafion™ in terms of energy performances as well as cost and sustainability. This polymer is also easily autoclavable, so allowing a re-use of the separator with a consequent beneficial cost effect.

Aqueous Processing of NaMnO Cathode Material for the Development of Greener Na-Ion Batteries.

The implementation of aqueous electrode processing of cathode materials is a key for the development of greener Na-ion batteries. Herein, the development and optimization of the aqueous electrode processing for the ecofriendly NaMnO (NMO) cathode material, employing carboxymethyl cellulose (CMC) as binder, are reported for the first time. The characterization of such an electrode reveals that the performances are strongly affected by the employed electrolyte solution, especially, the sodium salt and the use of electrolyte's additives.

Polymer and Composite Membranes for Proton-Conducting, High-Temperature Fuel Cells: A Critical Review.

Polymer fuel cells operating above 100 °C (High Temperature Polymer Electrolyte Membrane Fuel Cells, HT-PEMFCs) have gained large interest for their application to automobiles. The HT-PEMFC devices are typically made of membranes with poly(benzimidazoles), although other polymers, such as sulphonated poly(ether ether ketones) and pyridine-based materials have been reported. In this critical review, we address the state-of-the-art of membrane fabrication and their properties.

Correlation between Deposition Parameters and Hydrogen Production in CuO Nanostructured Thin Films.

In this article, we report a systematic investigation of the role of (i) substrate temperature, (ii) oxygen partial pressure, and (iii) radio frequency (rf) power on the crystal structure and morphology of CuO nanostructured thin films prepared by means of rf-magnetron sputtering starting from a Cu metal target. On selected films, photocatalytic tests have been carried out in order to correlate the structural and morphological properties of the thin films prepared under different conditions with the photocatalytic properties and to find out the key parameters to optimize the CuO nanostructured films. All of the synthesized films were single-phase CuO nanorods of variable diameter between 80 and 200 nm.

Nanoscale stabilization of the scheelite-type structure in La(0.99)Ca(0.01)NbO4 thin films.

In this paper we report on the deposition of La0.99Ca0.01NbO4 thin films with scheelite-type crystal structure.

Facile and green assembly of nanocomposite membranes for fuel cells.

We report on a facile spray deposition method, which allows obtaining nanocomposite membranes for high-temperature polymer fuel cells characterized by high homogeneity and excellent proton conductivity. The proposed method is also green, as it requires much smaller amounts of solvents with respect to standard casting.

Increasing the antibacterial effect of lysozyme by immobilization on multi-walled carbon nanotubes.

We report a facile strategy to obtain multiwalled carbon nanotubes (MWCNTs) functionalized with covalently bonded lysozyme. The functionalization procedure has been investigated by means of several techniques, including thermogravimetry, Raman spectroscopy, transmission electron microscopy, and cyclic voltammetry. A functionalization of about 1 lysozyme molecule every 4000 carbon atoms is obtained.

Structure-property interplay of proton conducting membranes based on PBI5N, SiO2-Im and H3PO4 for high temperature fuel cells.

Polybenzimidazoles (PBIs) are among the polymers of choice to prepare membranes for high temperature polymer fuel cells. Poly-2,2'(2,6-pyridine)-5,5'-bibenzimidazole (PBI5N), doped with H(3)PO(4), and acid-doped PBI5N containing 10 wt% of imidazole-functionalized silica membranes were studied with thermogravimetric analysis, differential scanning calorimetry, dynamic-mechanical analysis, infrared spectroscopy, and broadband electric spectroscopy to examine the structure-property relationships. Key results show that: (1) doped PBI5N membranes show thermal decomposition starting at 120 °C, while pristine PBI5N is stable up to 300 °C; (2) the presence of filler increases the acid uptake and decreases the crystallinity of PBI5N; (3) the addition of phosphoric acid reduces the mechanical properties of the membrane, while the addition of filler has the opposite effect; (4) acid-doped membranes have conductivity values on the order of 10(-2)-10(-3) S cm(-1); and (5) membranes exhibit a Vogel-Tamman-Fulcher (VTF) type proton conduction mechanism, where proton hopping is coupled with the segmental motion of the polymer chain.

Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives.

This critical review presents an overview of the various classes of Li(+) conductors for use as electrolytes in lithium polymer batteries and all-solid state microbatteries. Initially, we recall the main models for ion transport and the structure-transport relationships at the basis of the observed conductivity behaviours. Emphasis is then placed on the physico-chemical and functional parameters relevant for optimal electrolytes preparation, as well as on the techniques of choice for their evaluation.

In vitro calcified matrix deposition by human osteoblasts onto a zinc-containing bioactive glass.

Bioactive glasses synthesized by the sol-gel technique possess many of the qualities associated with an ideal scaffold material for a bone graft substitute. In view of the potential clinical applications, we performed a detailed in vitro study of the biological reactivity of synthesized 58S bioactive glass containing-zinc, in terms of osteoblast morphology, proliferation, and deposition of a mineralized extracellular matrix (ECM). Human Sarcoma Osteoblast (SAOS-2) cells were used to i) assess cytotoxicity by lactate dehydrogenase (LDH) release and ii) evaluate the deposition of a calcified extracellular matrix by ELISA assay and quantitative RT-PCR (qRT-PCR).

Multi-walled carbon nanotubes as the gas chromatographic stationary phase: role of their functionalization in the analysis of aliphatic alcohols and esters.

Presented hereafter is the novel application of differently functionalized multi-walled carbon nanotubes (f-MWCNTs) as stationary phases for the GC separation of C(1)-C(5) alcohols and esters. Low-cost packed columns, easily prepared in laboratory, were used with satisfactory results. Depending on the functional groups introduced on the pristine MWCNTs, remarkably different behaviours have been observed, thus indicating that derivatization is a key factor to achieve optimal resolution.

Separation of alkanes and aromatic compounds by packed column gas chromatography using functionalized multi-walled carbon nanotubes as stationary phases.

In the present work, we show a novel application of pristine and functionalized Multi-Walled Carbon Nanotubes (MWCNTs) as stationary phase in low-cost packed columns for the gas chromatographic separation of alkanes and aromatic hydrocarbons. The MWCNTs were deeply investigated by means of physical and chemical methods, like thermal analysis, IR and atomic force microscopy, and Inverse Gas Chromatography (IGC) in order to correlate the adsorption process and surface properties with the material purity level and functionalization degree. The derivatization process of the pristine nanotubes was a key factor to achieve a successful separation of both the light n-alkanes (C3-C5) and the related isomers (C4-C5 branched alkanes).

Effects of water-soluble functionalized multi-walled carbon nanotubes examined by different cytotoxicity methods in human astrocyte D384 and lung A549 cells.

The widespread projected use of functionalized carbon nanotubes (CNTs) makes it important to understand their potential harmful effects. Two cell culture systems, human A549 pneumocytes and D384 astrocytoma cells, were used to assess cytotoxicity of multi-walled CNTs (MWCNTs) with varying degrees of functionalization. Laboratory-made highly functionalized hf-MW-NH(2) and less functionalized CNTs (MW-COOH and MW-NH(2)) were tested in comparison with pristine MWCNTs, carbon black (CB) and silica (SiO(2)) by MTT assay and calcein/propidium iodide (PI) staining.

In vitro enhancement of SAOS-2 cell calcified matrix deposition onto radio frequency magnetron sputtered bioglass-coated titanium scaffolds.

In bone tissue engineering, bioglass coating of titanium (Ti) scaffolds has drawn attention as a method to improve osteointegration and implant fixation. In this in vitro study, bioactive glass layers with an approximate thickness of 1 microm were deposited at 200 degrees C onto a three-dimensional Ti-6Al-4V scaffold using a radio frequency (r.f.

Evaluation of circulating endothelial cells, VEGF and VEGFR2 serum levels in patients with chronic myeloproliferative diseases.

Authors evaluated some markers of angiogenetic activity in patients with chronic myeloproliferative diseases (CMDs). In this study by using a cytofluorimetric analysis we evaluated circulating endothelial progenitor cells (EPCs) in patients with chronic myeloproliferative disease. Moreover, in the same group of subjects, we evaluated serum levels of vascular endothelial growth factor (VEGF) and vascular endothelial growth factor receptor-2 (VEGFR2).

A photocatalytic water splitting device for separate hydrogen and oxygen evolution.

A two-compartment Plexiglas cell has been set up and tested for separate hydrogen and oxygen production from photocatalytic water splitting on a thin TiO2 layer deposited by magnetron sputtering on a flat Ti electrode inserted between the two cell compartments.