Vascular stent with immobilized anti-inflammatory chemerin 15 peptides mitigates neointimal hyperplasia and accelerates vascular healing.

Endovascular stenting is a safer alternative to open surgery for use in treating cerebral arterial stenosis and significantly reduces the recurrence of ischemic stroke, but the widely used bare-metal stents (BMSs) often result in in-stent restenosis (ISR). Although evidence suggests that drug-eluting stents are superior to BMSs in the short term, their long-term performances remain unknown. Herein, we propose a potential vascular stent modified by immobilizing clickable chemerin 15 (C15) peptides on the stent surface to suppress coagulation and restenosis.

A "built-up" composite film with synergistic functionalities on Mg-2Zn-1Mn bioresorbable stents improves corrosion control effects and biocompatibility.

Control of premature corrosion of magnesium (Mg) alloy bioresorbable stents (BRS) is frequently achieved by the addition of rare earth elements. However, limited long-term experience with these elements causes concerns for clinical application and alternative methods of corrosion control are sought after. Herein, we report a "built-up" composite film consisting of a bottom layer of MgF conversion coating, a sandwich layer of a poly (1, 3-trimethylene carbonate) (PTMC) and 3-aminopropyl triethoxysilane (APTES) co-spray coating (PA) and on top a layer of poly (lactic-co-glycolic acid) (PLGA) ultrasonic spray coating to decorate the rare earth element-free Mg-2Zn-1Mn (ZM21) BRS for tailoring both corrosion resistance and biological functions.

A tough nitric oxide-eluting hydrogel coating suppresses neointimal hyperplasia on vascular stent.

Vascular stent is viewed as one of the greatest advancements in interventional cardiology. However, current approved stents suffer from in-stent restenosis associated with neointimal hyperplasia or stent thrombosis. Herein, we develop a nitric oxide-eluting (NOE) hydrogel coating for vascular stents inspired by the biological functions of nitric oxide for cardiovascular system.

Corrigendum to "A Versatile Surface Bioengineering Strategy Based on Mussel-Inspired and Bioclickable Peptide Mimic".

[This corrects the article DOI: 10.34133/2020/7236946.].

Durable endothelium-mimicking coating for surface bioengineering cardiovascular stents.

Mimicking the nitric oxide (NO)-release and glycocalyx functions of native vascular endothelium on cardiovascular stent surfaces has been demonstrated to reduce in-stent restenosis (ISR) effectively. However, the practical performance of such an endothelium-mimicking surfaces is strictly limited by the durability of both NO release and bioactivity of the glycocalyx component. Herein, we present a mussel-inspired amine-bearing adhesive coating able to firmly tether the NO-generating species (e.

Endothelium-Mimicking Surface Combats Thrombosis and Biofouling via Synergistic Long- and Short-Distance Defense Strategy.

Thrombosis and infections are the main causes of implant failures (e.g., extracorporeal circuits and indwelling medical devices), which induce significant morbidity and mortality.

The protective effect of hydrogen-rich water on rats with type 2 diabetes mellitus.

The hydrogen-rich water (HW) has been reported to possess a beneficial role in patients with diabetes. However, a systemic evaluation with an appropriate animal model is necessary to reveal its mechanisms and efficacy. Herein, the protective effects of drinking HW on lipid and glucose metabolism, oxidative stress, and inflammation in type 2 diabetes mellitus (T2DM) rats were investigated.

Phenolic-amine chemistry mediated synergistic modification with polyphenols and thrombin inhibitor for combating the thrombosis and inflammation of cardiovascular stents.

Antithrombogenicity, anti-inflammation, and rapid re-endothelialization are central requirements for the long-term success of cardiovascular stents. In this work, a plant-inspired phenolic-amine chemistry strategy was developed to combine the biological functions of a plant polyphenol, tannic acid (TA), and the thrombin inhibitor bivalirudin (BVLD) for tailoring the desired multiple surface functionalities of cardiovascular stents. To realize the synergistic modification of TA and BVLD on a stent surface, an amine-bearing coating of plasma polymerized allylamine was firstly prepared on the stent surface, followed by the sequential conjugation of TA and BVLD in alkaline solution based on phenolic-amine chemistry (i.

New Approaches for Hydrogen Therapy of Various Diseases.

Hydrogen therapy has recently received increasing attention as an emerging and promising therapeutic technology due to its selective antioxidant property and cell energy regulatory capability in vivo. To solve the low solubility issue of hydrogen, a variety of nanomaterials and devices for hydrogen supply have recently been developed, aiming to increase the concentration of hydrogen in the specific disease site and realize controlled hydrogen release and combined treatment. In this review, we mainly focus on the latest advances in using hydrogen-generating devices and nanomaterials for hydrogen therapy.

Nitric oxide-generating compound and bio-clickable peptide mimic for synergistically tailoring surface anti-thrombogenic and anti-microbial dual-functions.

Application of extracorporeal circuits and indwelling medical devices has saved many lives. However, it is accompanied with two major complications: thrombosis and infection. To address this issue, we apply therapeutic nitric oxide gas (NO) and antibacterial peptide for synergistically tailoring such devices for surface anti-thrombogenic and antifouling dual functions.

Mimicking the Nitric Oxide-Releasing and Glycocalyx Functions of Endothelium on Vascular Stent Surfaces.

Endothelium can secrete vasoactive mediators and produce specific extracellular matrix, which contribute jointly to the thromboresistance and regulation of vascular cell behaviors. From a bionic point of view, introducing endothelium-like functions onto cardiovascular stents represents the most effective means to improve hemocompatibility and reduce late stent restenosis. However, current surface strategies for vascular stents still have limitations, like the lack of multifunctionality, especially the monotony in endothelial-mimic functions.

Poly-dopamine, poly-levodopa, and poly-norepinephrine coatings: Comparison of physico-chemical and biological properties with focus on the application for blood-contacting devices.

Thanks to its simplicity, versatility, and secondary reactivity, dopamine self-polymerized coatings (pDA) have been widely used in surface modification of biomaterials, but the limitation in secondary molecular grafting and the high roughness restrain their application in some special scenarios. Therefore, some other catecholamine coatings analog to pDA have attracted more and more attention, including the smoother poly-norepinephrine coating (pNE), and the poly-levodopa coating (pLD) containing additional carboxyl groups. However, the lack of a systematic comparison of the properties, especially the biological properties of the above three catecholamine coatings, makes it difficult to give a guiding opinion on the application scenarios of different coatings.

A Versatile Surface Bioengineering Strategy Based on Mussel-Inspired and Bioclickable Peptide Mimic.

In this work, we present a versatile surface engineering strategy by the combination of mussel adhesive peptide mimicking and bioorthogonal click chemistry. The main idea reflected in this work derived from a novel mussel-inspired peptide mimic with a bioclickable azide group (i.e.

Bioclickable and mussel adhesive peptide mimics for engineering vascular stent surfaces.

Thrombogenic reaction, aggressive smooth muscle cell (SMC) proliferation, and sluggish endothelial cell (EC) migration onto bioinert metal vascular stents make poststenting reendothelialization a dilemma. Here, we report an easy to perform, biomimetic surface engineering strategy for multiple functionalization of metal vascular stents. We first design and graft a clickable mussel-inspired peptide onto the stent surface via mussel-inspired adhesion.

Endothelium-Mimicking Multifunctional Coating Modified Cardiovascular Stents via a Stepwise Metal-Catechol-(Amine) Surface Engineering Strategy.

Stenting is currently the major therapeutic treatment for cardiovascular diseases. However, the nonbiogenic metal stents are inclined to trigger a cascade of cellular and molecular events including inflammatory response, thrombogenic reactions, smooth muscle cell hyperproliferation accompanied by the delayed arterial healing, and poor reendothelialization, thus leading to restenosis along with late stent thrombosis. To address prevalence critical problems, we present an endothelium-mimicking coating capable of rapid regeneration of a competently functioning new endothelial layer on stents through a stepwise metal (copper)-catechol-(amine) (MCA) surface chemistry strategy, leading to combinatorial endothelium-like functions with glutathione peroxidase-like catalytic activity and surface heparinization.

Metal-catechol-(amine) networks for surface synergistic catalytic modification: Therapeutic gas generation and biomolecule grafting.

Regarding the high requirement of cardiac and vascular implants in tissue engineering, a novel concept of surface chemistry strategy featuring multiple functions is proposed in this study, which provides glutathione peroxidase (GPx)-like catalytic activity and allows secondary reactions for grafting functional biomolecules. The suggested strategy is the fabrication of a metal-catechol-(amine) network (MCAN) containing copper ions with GPx-like activity, amine-bearing hexamethylenediamine (HD) and wet adhesive catechol dopamine (DA). With a simple one-step molecular/ion co-assembly, the developed copper-DA-HD (Cu-DA/HD) network can be used to catalyze the generation of therapeutic nitric oxide (NO) gas in a durable and dose-controllable manner.

Mussel-inspired "built-up" surface chemistry for combining nitric oxide catalytic and vascular cell selective properties.

Specific selectivity of vascular cells and antithrombogenicity are crucial factors for the long-term success of vascular implants. In this work, a novel concept of mussel-inspired "built-up" surface chemistry realized by sequential stacking of a copper-dopamine network basement, followed by a polydopamine layer is introduced to facilitate the combination of nitric oxide (NO) catalysis and vascular cell selectivity. The resultant "built-up" film allowed easy manipulation of the content of copper ions and the density of catechol/quinone groups, facilitating the multifunctional surface engineering of vascular devices.

From surface to bulk modification: Plasma polymerization of amine-bearing coating by synergic strategy of biomolecule grafting and nitric oxide loading.

Integration of two or more biomolecules with synergetic and complementary effects on a material surface can help to obtain multi-functions for various biomedical applications. However, the amounts of biomolecules integrated and their physiological functions are compromised due to the limited surface anchoring sites. Herein, we propose a novel concept of film engineering strategy "from surface to bulk synergetic modification".

Study of functional drug-eluting stent in promoting endothelialization and antiproliferation.

Drug-eluting stents have been widely used in the clinic because of their impressive ability to reduce restenosis. However, the conventional biodegradable polymers used for drug-loaded coatings undergo bulk erosion, which can induce internal catalysis, resulting in a high local acidity during the degradation process and unfavorable side-effects. Herein, poly(1,3-trimethylene carbonate), a surface eroding biodegradable polymer, was chosen as a drug-loaded coating for cardiovascular stents.

A facile dopamine-mediated metal-catecholamine coating for therapeutic nitric oxide gas interface-catalytic engineering of vascular devices.

Developing a facile and versatile strategy to endow blood-contacting devices with surface in situ nitric oxide (NO) generation properties by catalytically decomposing endogenously existing S-nitrosothiols (RSNO) from blood is of immense scientific and engineering interest. However, most available strategies involve drawbacks of low efficiency, complex processes, and toxic chemicals. In this work, we report a facile method to deposit a NO-generating coating on a 316L stainless steel (SS) substrate through dopamine-mediated one-step assembly of CuII-dopamine (CuII-DA) coordination complexes.

Photolithography-Mediated Area-Selective Immobilization of Biomolecules on Polydopamine Coating.

Functional microdomains consisting of multiple molecules have widespread applications. However, most of available methods reported so far have a common limitation for widespread practical use. Herein, we reported a facile method based on material-independent polydopamine surface chemistry to realize the area-selective immobilization of dual amine-/thiol-terminal bioactive molecules assisted by photolithography.

Surface-Degradable Drug-Eluting Stent with Anticoagulation, Antiproliferation, and Endothelialization Functions.

Drug-eluting stents (DES) have been widely applied for saving the life of patients with coronary artery diseases (CADs). However, conventional polymers such as polylactic acid (PLA) and poly (lactic-co-glycolic acid) (PLGA), which are widely applied for drug-eluting stents studies, have serious bulk erosion problems, like high local acidity and poor mechanical properties. Instead, we chose surface erosion polymer poly (1, 3-trimethylene carbonate) (PTMC) as a drug carrier in this study.

Development of nitric oxide catalytic coatings by conjugating 3,3-disulfodipropionic acid and 3,3-diselenodipropionic acid for improving hemocompatibility.

Nitric oxide (NO), discovered as an endothelium-derived relaxing factor, has been found to have multiple intracellular effects in vascular diseases including vasorelaxation regulation, endothelial regeneration, inhibition of leukocyte chemotaxis, and platelet activation. In the work described here, the authors have developed a NO-catalytic bioactive coating for improving hemocompatibility. The authors first prepared a dopamine and hexamethylendiamine (PDAM/HD) amine-rich adherent copolymer coating to introduce amine groups onto 316L stainless steel, followed by covalently conjugating 3,3-disulfodipropionic acid (S-S) and 3,3-diselenodipropionic acid (Se-Se), which mimic glutathione peroxidase-like catalytic production of NO.

Multifunctional Plasma-Polymerized Film: Toward Better Anticorrosion Property, Enhanced Cellular Growth Ability, and Attenuated Inflammatory and Histological Responses.

Over the past few decades, plasma surface modification technique has been widely used to selectively improve surface properties and biocompatibility of materials. In this paper, at first a simple and effective method for the deposition of plasma-polymerized allylamine films onto 316L stainless steel (SS) from an allylamine/nitrogen gas mixture was developed. These amine-rich films were characterized by grazing incidence attenuated total reflection Fourier transform infrared spectroscopy (GATR-FTIR) and X-ray photoelectron spectroscopy (XPS), and the anticorrosion properties were demonstrated by electrochemical analysis.