Cellulose / waste Cu-activated carbon composite: A sustainable and green material for boosting laccase activity and degradation of bisphenol A in wastewater.

Low enzyme activity is one of the disadvantages of immobilized laccase. In this study, waste Cu-loaded activated carbon (Cu-AC) was successfully used in preparing a novel composite support，cellulose / Cu-loaded activated carbon beads (C / Cu-AC)， and effectively boosted immobilized laccase activity. To achieve optimum conditions for immobilization of laccase, the immobilization time, pH and laccase concentration were examined.

Immobilization of multilayer sodium alginate/polysaccharide antibacterial material composite beads as glufosinate controlled release matrices.

To find a new way to slow down the release of glufosinate (GA) pesticide and to solve the susceptibility to decomposition by soil microorganisms, a series of novel antibacterial polysaccharide-based sustained release beads (PSRB) were prepared. The PSRB was prepared by immobilization of GA loaded polysaccharide-based chitosan quaternary ammonium salt (PS-HACC) microcapsules in the core and layers of the multilayer sodium alginate beads. The PSRB was characterized by FI-IR spectroscopy, XRD, SEM, and BET to reveal their composition and surface morphology.

A facile method to fabricate sustainable bamboo ethanol lignin/carboxymethylcellulose films with efficient anti-ultraviolet and insulation properties.

Given the environmental concerns related to the non-degradability of conventional petroleum-based polymer films, the synthesis of biodegradable films utilizing natural polymers derived from biomass has emerged as a promising alternative, garnering significant attention in recent research endeavors. This research introduced an environmentally friendly and efficient method, utilizing extract liquid from the green ethanol pulping process as the solvent to completely dissolve carboxymethylcellulose into the film-forming liquid, and employing the solution pouring technique to successfully fabricate bamboo ethanol lignin/carboxymethylcellulose films (LCF). The findings revealed that the lignin content significantly influenced the LCF, endowing them with tunable mechanical properties, effective UV-blocking, and thermal insulation capabilities.

Synthesis of lignin-based resin and fabrication of sustainable transparent wood based on bio-recycling concept.

Transparent wood (TW) has attracted much attention in the field of energy saving building structural materials because of its high light transmittance, good thermal insulation performance and good toughness. However, the polymeric resins used in the present study to impregnate lignin-based wood templates are usually derived from petroleum-based chemical resources, which pose a fatal threat to human beings both in terms of consuming large amounts of resources and causing environmental pollution problems. It is therefore important to develop alternatives to petroleum-derived chemicals in renewable natural resources.

Ball-milling as effective and economical process for biodiesel production under Kraft lignin activated carbon stabilized potassium carbonate.

Biodiesel is a typical renewable energy and the previous transesterification processes for biodiesel production mainly focus on thermocatalytic methods. In this paper, the ball-milling process was investigated into the biodiesel production under Kraft lignin activated carbon stabilized KCO. Biodiesel yield increased to 66 % after only 5 min and reached 100 % within 25 min under optimal ball-milling conditions (0.

Insecticidal characteristics and mechanism of a promising natural insecticide against saw-toothed grain beetle.

The prevention of grain storage pests is a universal concern all over the world. It is in high demand to explore novel, safe and green insecticidal techniques to address such concerns. In this work, both raw and calcined diatomite were used as a natural insecticide to remove common grain storage pests with improved lethal effect on the saw-toothed grain beetle.

Research on Resin Used for Impregnating Polyimide Fiber Paper-Based Composite Materials.

In this paper, a resin with high adhesion, easy curing, good flexibility, and high temperature resistance was prepared from polyimide fiber paper. First, in order to improve the toughness and curability of impregnating resin, epoxy resin was modified by addition of vinyl silicone resin. Subsequently, ternary resin with high temperature stability was obtained by polyimide resin addition.

Adsorption and Release Kinetics, Equilibrium, and Thermodynamic Studies of Hymexazol onto Diatomite.

Pesticide sustained-release agents have advantages of low toxicity, high efficiency, and long duration. However, the sustained-release effects were not ideal, such as short release time and low release rate. The physical and chemical properties of diatomite are high stability, high porosity, and good sustained-release and controlled-release abilities.

A rapid and quantitative method for assessing the whiteness of whitened lignin based on an in-depth analysis of reported methods.

The modification of lignin to a lighter color has been a concern in lignin valorization. In the previous reports on lignin color reduction, the methods of assessing the whiteness of lignin varied from each other, due to the absence of a universal method for characterizing the lightness/darkness of dark samples. In this paper, the reported methods for assessing the whiteness of lignin were analyzed, including "comparison of absorbance curve", "absorbance at specific wavelength", "ISO or TAPPI brightness" and "photograph observation".

Immobilizing Laccase on Modified Cellulose/CF Beads to Degrade Chlorinated Biphenyl in Wastewater.

Novel modified cellulose/cellulose fibril (CF) beads (MCCBs) loaded with laccase were prepared to degrade polychlorinated biphenyls (PCBs) in wastewater. The proper porous structure in MCCBs was achieved by introducing nano CaCO₃ (as a pore forming agent) in cellulose/CF (CCBs) beads during the preparation process. Cellulose/CF composite beads were modified by maleic anhydride to introduce carboxyl groups.

Investigation on the production of formic and acetic acids from lignin by ethanol organosolv treatment at mild conditions.

Cellulose and hemicellulose are usually considered the sources of formic and acetic acids that are obtained during ethanol pulping process, while our research reveals that lignin is another critical source of acids in the process. In this research, the sample lignin was purified and treated under ethanol pulping conditions and the factors that influence the yields of acids including: ethanol ratio (0-100%), residence time (30-210 min), reaction temperature (150-200 °C) and the effect of residual oxygen in the vessel, were tested separately. The yields of acids were identified using UPLC, the volatile products were characterized by GC-MS and the residual lignin was characterized by C NMR.

Immobilizing Laccase on Different Species Wood Biochar to Remove the Chlorinated Biphenyl in Wastewater.

Biochars produced from two different wood species over a microwave assisted pyrolysis process were used as novel and green-based supports for immobilizing enzyme, laccase in particular. The results obtained from FT-IR, SEM and BET measurements indicated that Maple biochar with honeycomb structure has higher surface area and pore volume than Spruce biochar; and there exist O-H, C-H, C=O and C=C groups in biochars for potential chemical modification. The best laccase immobilization conditions identified from an orthogonal experiment were pH = 3, laccase concentration 16 g/L and contact time 8 h.

Effect of Feedstock Concentration on Biogas Production by Inoculating Rumen Microorganisms in Biomass Solid Waste.

A methane production system with continuous stirred-tank reactor, rumen liquid as inoculate microorganisms, and paper mill excess sludge (PES) as feedstock was studied. The work mainly focused on revealing the effect of feedstock concentration on the biogas production, which was seldom reported previously for the current system. The optimal fermentation conditions were found as follows: pH = 7, T = 39 ± 1 °C, sludge retention time is 20 days, sludge with total solids (TS) are 1, 2, 3.

[Rapid Method for Determination of Furfural and 5-Hydroxymethyl Furfural of Ethanol-Water Hydrolysate of Biomass with UV Spectroscopy].

The soluble lignin and furan compounds in hydrolysate of lignocellulose biomass have absorbed peaks and inter-superimpose in UV spectroscopy. Therefore, this paper developed a method for the determination of furfural and 5-hydroxymethyl furfural in ethanol-water refining liquors of lignocellulose biomass based on UV spectroscopy. The study showed that there is a good and linear relationship between maximum absorption (λmax) and the concentration percent of 5-HMF (W(5-HMF)) of M, the regression coefficient up to 0.