Synthesis of Ru-W/CeZrO catalyst with superior NH-SCO performance: Synergy between Ru and W species.

Ammonia selective catalytic oxidation (NH-SCO) is an effective method for NH removal. However, it is still a great challenge to develop catalysts with a wide operating temperature window, high catalytic activity and N selectivity, particularly for the removal of high-concentration NH from NH-fueled engine exhaust gas. Herein, a small amount of Ru (0.

Thermo-mechanical coupling characteristics of the shearer's guiding shoe during the friction.

The reliability and longevity of the guiding shoe are crucial for the proper functioning of coal mining machines. The heavy wear of the sliding surface under thermal stress coupling is the primary factor influencing the service life of the guiding shoe. To reveal the heat flow distribution patterns and the thermo-stress coupling mechanisms of the guiding surface, a thermo-mechanical coupling model of the guiding shoe and the pin row is established.

Pt/AlO@Ce/ZrO-S bifunctional catalysts prepared by mechanically milling for selective catalytic oxidation of high-concentration ammonia.

The selective catalytic oxidation (SCO) is an effective method for removing slipped high-concentration ammonia from NH-fueled engine exhaust gas. Herein a novel bifunctional catalyst was synthesized by mechanically mixing sulfated Ce/ZrO (Ce/ZrO-S) with a small fraction of Pt/AlO (Pt 0.1 wt.

Treatment of bilateral Posterior Tibial Compartment Syndrome using a Novel Surgical Approach: A Case Report of the Posterior Approach.

Osteofascial compartment syndrome is a serious surgical emergency that requires prompt diagnosis and treatment. It presents a challenge for surgeons due to its high disability rate and difficult management. Early fasciotomy decompression is crucial in preventing severe complications.

Research on the hydraulic support face guard mechanism and coupling characteristic of rib spalling in large mining heights.

In view of the problem of poor coupling adaptability and easy rib spalling of coal wall in large mining height comprehensive mining, based on the effective inhibition effect of face guard mechanism on coal wall spalling, the structural characteristics and bearing capacity of different structural forms of the face guard mechanism are compared and analyzed. According to the surrounding rock adaptability of the face guard mechanism, established a numerical analysis model for rigid-flexible coupling of the face guard mechanism under different spalling forms. In order to accurately simulate the stress state of the protective mechanism, a variable stiffness spring damping system is used to replace the hydraulic cylinder.

Experimental study on shearer traction vibration considering attitude disturbances.

Due to the influence of structural clearances, the shearer's oscillates and jumps concerning the scraper are frequent, which induces the collision and vibration impact of the traction components and exacerbates the traction failure of the shearer. Therefore, to explore the correlation between attitude disturbance and traction vibration, an experiment on the traction vibration is carried out, the spatial swaying of the shearer and vibration differences between two traction components are obtained, the influence of the lifting angle of the rocker arm is discussed, and the influence mechanism of the shearer attitude disturbance on traction vibration is elucidated. The results indicate that the rolling swing intensity of the shearer is the highest while the yawing swing intensity is the lowest, and the pitch swing intensity increases with the increase of the lifting angle of the rocker arm.

Dynamic characteristics of scraper conveyor chain drive system under the impact condition of lump coal.

Scraper conveyor is the most important transportation equipment in the comprehensive mining equipment, and the chain drive system is its core subsystem, its dynamic characteristics will significantly affect the efficiency of coal transportation in the comprehensive mining face. In this paper, the dynamic characteristics of chain drive system when impacted by falling coal are investigated by means of test. The impact test bench of scraper conveyor was set up to analyze the effects of chain speed, impact height and impact load mass on the dynamic characteristics of the chain drive system of scraper conveyor under the working conditions of unloaded and loaded.

CL-K1 Promotes Complement Activation and Regulates Opsonophagocytosis of Macrophages with CD93 Interaction in a Primitive Vertebrate.

Collectin is a crucial component of the innate immune system and plays a vital role in the initial line of defense against pathogen infection. In mammals, collectin kidney 1 (CL-K1) is a soluble collectin that has recently been identified to have significant functions in host defense. However, the evolutionary origins of immune defense of CL-K1 and its mechanism in clearance of pathogenic microorganisms remain unclear, especially in early vertebrates.

The rock damage mechanism of combined rock breaking with saw blade and conical pick.

The combined rock breaking method with the saw blade and conical pick is proposed to improve the rock breaking efficiency. The numerical simulation of combined rock breaking with the saw blade and conical pick is established to investigate the rock damage mechanism. And verified and modified the numerical simulation model with the rock breaking comprehensive test bench, the quantitative analysis error is less than 0.

Long-chain pentraxin 3 possesses agglutination activity and plays a role in host defense against bacterial infection in Oreochromis niloticus.

Pentraxin 3 (PTX3) is a soluble pattern recognition molecule in the innate immune system that has multiple functions. It is involved in resisting pathogen infection. However, the functions of PTX3 in teleost fish are not well understood.

Vibration response difference of caving mechanism under coal rock impact based on mechanical-hydraulic coupling.

Top coal caving in fully mechanized caving mining will cause an irregular impact on the caving mechanism of hydraulic support. The vibration response of the caving mechanism varies under different forms of impact. This response difference is a prerequisite for new coal rock identification technology in intelligent mining.

Digital Control Method and Performance Analysis of the Double-Compound Axial Piston Pump.

The flow control range of the double-compound axial piston pump with the traditional mechanical-hydraulic feedback servo control is limited and the accuracy is poor. Accordingly, this paper proposes a digital control scheme and its control strategy using a linear stepper motor direct drive servo valve for the precise control and double pumps cooperation of the double-compound axial piston pump. A numerical model of the digital control double-compound axial piston pump is established, and the validity of the model is verified by experimental tests.

Research on Coal Gangue Recognition Based on Multi-source Time-Frequency Domain Feature Fusion.

The over-exploitation of resources caused by the increasing coal demand has resulted in a sharp increase in solid waste emissions mainly gangue, which has made the burden on the environment, economy, resources, and society of our country heavier. In order to achieve a balance between energy consumption and solid waste emission in the process of top coal caving, this study carried out coal gangue recognition research based on multi-source time-frequency domain feature fusion (MS-TFDF-F). First, the process of coal gangue symbiosis and the harm of gangue in top coal caving are analyzed, and the fundamental method of comprehensive treatment of gangue is put forward, which is the accurate recognition of the coal gangue interface.

A nomogram for predicting acute kidney injury following hepatectomy: A propensity score matching analysis.

Study Objective: The low central venous pressure (LCVP) technique is a key technique in hepatectomy, but its impact on acute kidney injury (AKI) is unclear. The purpose of this study was to explore risk factors (in particular LCVP time) for AKI following hepatectomy.

Design: A retrospective case-control study with propensity score matching.

Mannose-binding lectin suppresses macrophage proliferation through TGF-β1 signaling pathway in Nile tilapia.

Mannose-binding lectin (MBL) is a multifunctional pattern recognition molecule, which not only mediates the recognition of pathogenic microorganisms and their products, playing an important role in innate immune defense, but also participates in adaptive immune responses of mammalian. However, it's related immune mechanism remains limited, especially the regulation of cell proliferation in early vertebrates. In this study, OnMBL was found to bind to kidney macrophages (MФ) from Nile tilapia ().

Estimation of drinking water volume of laboratory animals based on image processing.

This paper describes an image processing-based technique used to measure the volume of residual water in the drinking water bottle for the laboratory mouse. This technique uses a camera to capture the bottle's image and then processes the image to calculate the volume of water in the bottle. Firstly, the Grabcut method separates the foreground and background to avoid the influence of background on image feature extraction.

C9 regulates the complement-mediated cell lysis in association with CD59 to resist bacterial infection in a primary animal.

Complement component 9 (C9), as an essential component of terminal membrane attack complex of complement system, plays an important role in innate immune defense. However, the function and regulatory mechanism of C9 in the antimicrobial immune response of teleost fish remain unclear. In this study, the open reading frame of Nile tilapia (Oreochromis niloticus) C9 (OnC9) gene was amplified.

Complement C3 Regulates Inflammatory Response and Monocyte/Macrophage Phagocytosis of in a Teleost Fish.

The complement system is composed of a complex protein network and is pivotal to innate immunity. Complement 3 (C3) is a critical protein in the complement cascade and participates in complement activation and immune defense. In this study, C3 from Nile tilapia () was cloned and its function in resisting pathogen infection was characterized.

Inverse Design of Energy-Absorbing Metamaterials by Topology Optimization.

Compared with the forward design method through the control of geometric parameters and material types, the inverse design method based on the target stress-strain curve is helpful for the discovery of new structures. This study proposes an optimization strategy for mechanical metamaterials based on a genetic algorithm and establishes a topology optimization method for energy-absorbing structures with the desired stress-strain curves. A series of structural mutation algorithms and design-domain-independent mesh generation method are developed to improve the efficiency of finite element analysis and optimization iteration.

Investigation of fragment separation during a circular saw blade cutting rock based on ANSYS/LS-DYNA.

Circular saw blades are widely used in stone processing. The circular saw blade cutting hard rock numerical simulation model based on ANSYS/LS-DYNA was established to investigate the complex dynamic problem in rock cutting. The failure mechanism of the rock and the influence of cutting parameters on the cutting force and rock fragments were studied by numerical simulation.

Functional Characterization of Serum Amyloid P Component (SAP) in Host Defense against Bacterial Infection in a Primary Vertebrate.

Serum amyloid P component (SAP), an ancient short pentraxin of the pentraxin family, plays an essential role in resistance to bacterial infection. In this study, the expression and functional characterization of SAP (OnSAP) in Nile tilapia (), a primary vertebrate, are investigated. The open reading frame of is 645 bp of a nucleotide sequence encoding a polypeptide of 214 amino acids.