Positively charged nanofiltration membranes have attracted much attention in the field of lithium extraction from salt lakes due to their excellent ability to separate mono- and multi-valent cations. However, the thicker selective layer and the lower affinity for Li result in lower separation efficiency of the membranes. Here, PEI-P membranes with highly efficient Li/Mg separation performance are prepared by introducing highly lithophilic 4,7,10-Trioxygen-1,13-tridecanediamine (DCA) on the surface of PEI-TMC membranes using a post-modification method.
View Article and Find Full Text PDFArtificial ion diodes, inspired by biological ion channels, have made significant contributions to the fields of physics, chemistry, and biology. However, constructing asymmetric sub-nanofluidic membranes that simultaneously meet the requirements of easy fabrication, high ion transport efficiency, and tunable ion transport remains a challenge. Here, a direct and flexible in situ staged host-guest self-assembly strategy is employed to fabricate ion diode membranes capable of achieving zonal regulation.
View Article and Find Full Text PDFTo elucidate the microstructure and charge transfer behavior at the interface of Pd/metal oxide semiconductor (MOS) catalysts and systematically explore the crucial role of the Mott-Schottky effect in the oxygen reduction reaction (ORR) electrocatalysis process, this study established a testing system for spatially identifying Mott-Schottky effects and electronic properties at Pd/MOS interfaces, leveraging highly sensitive Kelvin probe force microscopy (KPFM). This system enabled visualization and quantification of the surface potential difference and Mott-Schottky barrier height (Φ) at the Pd/MOS heterojunction interfaces. Furthermore, a series of Pd/MOS Mott-Schottky catalysts were constructed based on differences in work functions between Pd and n-type MOS.
View Article and Find Full Text PDFThe design and development of new and efficient catalyst binder materials are important for improving cell performance in high-temperature proton-exchange membrane fuel cells (HT-PEMFCs). In this study, a series of tetrafluorophenyl phosphonic acid-based binder materials (PF-y-P, y=1, 0.83, and 0.
View Article and Find Full Text PDFThe conventional inactivated tetanus toxin plays an instrumental role in preventing tetanus. Nevertheless, the challenges associated with its production process, the potential for adverse reactions, and reduced effectiveness in vulnerable populations such as neonates and the elderly rise the need for a novel tetanus toxin vaccine. Recombinant subunit vaccine offer a viable solution, and the tetanus toxin fragment C (TTFC) is emerging as a promising candidate.
View Article and Find Full Text PDFMetal-organic frameworks (MOFs) have been developed as an ideal platform for exploration of the relationship between intrinsic structure and catalytic activity, but the limited catalytic activity and stability has hampered their practical use in water splitting. Herein, we develop a bond length adjustment strategy for optimizing naphthalene-based MOFs that synthesized by acid etching Co-naphthalenedicarboxylic acid-based MOFs (donated as AE-CoNDA) to serve as efficient catalyst for water splitting. AE-CoNDA exhibits a low overpotential of 260 mV to reach 10 mA cm and a small Tafel slope of 62 mV dec with excellent stability over 100 h.
View Article and Find Full Text PDFAggregation-induced emission luminogens (AIEgens) in the second near-infrared region (NIR-II,1000-1700 nm) have shown tremendous potential as theragnostic probe for tumor multimodal diagnostic imaging and combined treatment owing to their programmable optical, structural and functional properties. Herein, we presented a radionuclide Lu-labeled AIEgen, Lu-2TT-oC6B dots, for NIR-II fluorescence and SPECT/CT imaging-guided tumor photothermal and radiopharmaceutical therapy. Intriguingly, Lu-2TT-oC6B self-assembled into 10 nm dots, exhibited high NIR-II fluorescence quantum yield (QY, 1.
View Article and Find Full Text PDFPromoting the catalyst performance for oxygen reduction reaction (ORR) in energy conversion devices through controlled manipulation of the structure of catalytic active sites has been a major challenge. In this work, we prepared Fe-N-C single-atom catalysts (SACs) with Fe-N active sites and found that the catalytic activity of the catalyst with shrinkable Fe-N-C sites for ORR was significantly improved compared with the catalyst bearing normal Fe-N-C sites. The catalyst C@PVI-(TPC)Fe-800, prepared by pyrolyzing an axial-imidazole-coordinated iron corrole precursor, exhibited positive shifted half-wave potential ( = 0.
View Article and Find Full Text PDFCancer immunotherapy is a favorable strategy for facilitating anti-tumor immunity, but it shows limited benefits in clinical practice owing to the immunosuppressive tumor microenvironment. Pyroptosis shows great immunostimulatory effect on tumor, whereas the lack of pyroptotic inducer with imaging property has restricted its progress in tumor theranostics. Herein, a mitochondria-targeted aggregation-induced emission (AIE) luminogen (TPA-2TIN) with NIR-II emission is designed for highly efficient induction of tumor cell pyroptosis.
View Article and Find Full Text PDFBreast cancer has become a huge burden with continued rise of incidence and death rate worldwide. Various methods for diagnosis and therapy of breast cancer have met the challenges of lack of complete information about the tumor location and limited therapy efficacy. Although aggregation-induced emission luminogens (AIEgens) have shown great promise for various cancer treatment applications, they may be incompetent for deep-seated tumor diagnosis due to the limited penetration depth.
View Article and Find Full Text PDFIn recent years, growing concerns regarding energy efficiency and heat mitigation, along with the critical goal of carbon neutrality, have drawn human attention to the zero-energy-consumption cooling technique. Passive daytime radiative cooling (PDRC) can be an invaluable tool for combating climate change by dispersing ambient heat directly into outer space instead of just transferring it across the surface. Although significant progress has been made in cooling mechanisms, materials design, and application exploration, PDRC faces challenges regarding functionality, durability, and commercialization.
View Article and Find Full Text PDFThe electrochemical conversion reaction, usually featured by multiple redox processes and high specific capacity, holds great promise in developing high-energy rechargeable battery technologies. However, the complete structural change accompanied by spontaneous atomic migration and volume variation during the charge/discharge cycle leads to electrode disintegration and performance degradation, therefore severely restricting the application of conventional conversion-type electrodes. Herein, latticed-confined conversion chemistry is proposed, where the "intercalation-like" redox behavior is realized on the electrode with a "conversion-like" high capacity.
View Article and Find Full Text PDFMicroarchitectures with complex interior structures are important for many applications. However, engineering complex interior structures within microarchitectures are challenging. This article reports the introduction of electrochemical sculpting processes to carve the microarchitectures during or after their electrochemical growing process to design the interior structure of the microarchitectures.
View Article and Find Full Text PDFIn order to accommodate the growing demand for positron emission tomography (PET), it will be necessary to create innovative radiochemical and engineering technologies to optimize the manufacture and development of PET probes. Microfluidic devices allow radiosynthesis to be performed in microscale amounts, significantly impacting PET tracer production. Compared to traditional methods, microfluidic devices can produce PET tracers in a shorter time, higher yields, with lower reagent consumption, higher molar activity, and faster purification.
View Article and Find Full Text PDFPurpose: Aggregation-induced emission (AIE) molecules have been widely utilized for fluorescence imaging in many biomedical applications, benefited from large Stokes shift, high quantum yield, good biocompatibility, and resistance to photobleaching. And visualization of mitochondria is almost investigated in vitro and ex vivo, but in vivo study of mitochondria is more essential for systematic biological research, especially during embryogenesis. Therefore, suitable and time-saving alternatives with simple operation based on AIE molecules are urgently needed compared with traditional transgenic approach.
View Article and Find Full Text PDFPhotodynamic therapy (PDT) is recognized to be a promising strategy for anticancer treatment. Considering the progressive application of PDT in clinical trials, highly efficient and photostable photosensitizers (PSs) are in strong demand. Aggregation-induced emission (AIE) based PSs are promising phototheranostic materials for tumor imaging and PDT due to their high fluorescence efficiency and photostability.
View Article and Find Full Text PDFThe demand for high rate energy storage systems is continuously increasing driven by portable electronics, hybrid/electric vehicles and the need for balancing the smart grid. Accordingly, NbO based materials have gained great attention because of their fast cation intercalation faradaic charge storage that endows them with high rate energy storage performance. In this review, we describe the crystalline features of the five main phases of NbO and analyze their specific electrochemical characteristics with an emphasis on the intrinsic ion intercalation pseudocapacitive behavior of T-NbO.
View Article and Find Full Text PDFA lack of efficient diagnostic tools for early and noninvasive diagnosis of breast cancer has restricted the clinical treatment effect. This problem might be addressed by the combination of aggregation-induced emission (AIE) fluorescence imaging and positron emission tomography (PET) with the dual advantages of high resolution and easy operation, and unlimited penetration and high sensitivity. Here, a mitochondria-targeted AIE luminogen (AIEgen) radiolabeled with F was developed through a two-step radiochemical reaction by virtue of a prosthetic group.
View Article and Find Full Text PDFFor bacterial adhesion and biofilm formation, a thorough understanding of the mechanism and effective modulating is lacking due to the complex extracellular electron transfer (EET) at bacteria-surface interfaces. Here, we explore the adhesion behavior of a model electroactive bacteria under various metabolic conditions by an integrated electrochemical single-cell force microscopy system. A nonlinear model between bacterial adhesion force and electric field intensity is established, which provides a theoretical foundation for precise tuning of bacterial adhesion strength by the surface potential and the direction and flux of electron flow.
View Article and Find Full Text PDFElectrochemical degradation of toxic sulfanilamide with inexpensive approach is in urgent demand due to the harmful effects of sulfanilamide for both humans and aquatic environments. Here, we reported an efficient mineralization of sulfanilamide by using NiFe-layered double hydroxide (NiFe-LDH) nanosheets array with abundant oxygen vacancies that was in situ grown on exfoliated graphene (EG) by a simple hydrothermal treatment at different temperatures. The hydrothermal temperature was carefully analyzed for control synthesis of oxygen vacancy-rich NiFe-LDH/EG nanosheets array (NiFe-LDH/EG-OVr) for sulfanilamide degradation.
View Article and Find Full Text PDFPurpose: To investigate the post-transplantation behaviour and therapeutic efficacy of human urinary-induced pluripotent stem cell-derived cardiomyocytes (hUiCMs) in infarcted heart.
Methods: We used clustered regularly interspaced short palindromic repeats/CRISPR-associated nuclease 9 (CRISPR/Cas9) technology to integrate a triple-fusion (TF) reporter gene into the AAVS1 locus in human urine-derived hiPSCs (hUiPSCs) to generate TF-hUiPSCs that stably expressed monomeric red fluorescent protein for fluorescence imaging, firefly luciferase for bioluminescence imaging (BLI) and herpes simplex virus thymidine kinase for positron emission tomography (PET) imaging.
Results: Transplanted cardiomyocytes derived from TF-hUiPSCs (TF-hUiCMs) engrafted and proliferated in the infarcted heart as monitored by both BLI and PET imaging and significantly improved cardiac function.
In anion exchange membrane fuel cells, catalytic reactions occur at a well-defined three-phase interface, wherein conventional heterogeneous catalyst layer structures exacerbate problems, such as low catalyst utilization and limited mass transfer. We developed a structural engineering strategy to immobilize a molecular catalyst tetrakis(4-methoxyphenyl)porphyrin cobalt(II) (TMPPCo) on the side chains of an ionomer (polyfluorene, PF) to obtain a composite material (PF-TMPPCo), thereby achieving a homogeneous catalysis environment inside ion-flow channels, with greatly improved mass transfer and turnover frequency as a result of 100 % utilization of the catalyst molecules. The unique structure of the homogeneous catalysis system comprising interconnected nanoreactors exhibits advantages of low overpotential and high fuel-cell power density.
View Article and Find Full Text PDFOccurrence and development of cancer are multifactorial and multistep processes which involve complicated cellular signaling pathways. Mitochondria, as the energy producer in cells, play key roles in tumor cell growth and division. Since mitochondria of tumor cells have a more negative membrane potential than those of normal cells, several fluorescent imaging probes have been developed for mitochondria-targeted imaging and photodynamic therapy.
View Article and Find Full Text PDFEmerging single-atom catalysts (SACs) hold great promise for CO electroreduction (CO ER) but the design of highly active and cost-efficient SACs is still challenging. Herein, a gas diffusion strategy, along with one-step thermal activation, for fabricating N-doped porous carbon polyhedrons with trace isolated Fe atoms (Fe NC) is developed. The optimized Fe NC/S -1000 with atomic Fe-N sites supported by N-doped graphitic carbons exhibits superior CO ER performance with the CO Faradaic efficiency up to 96% at -0.
View Article and Find Full Text PDF