Ambient health sensing on passive surfaces using metamaterials.

Ambient sensors can continuously and unobtrusively monitor a person's health and well-being in everyday settings. Among various sensing modalities, wireless radio-frequency sensors offer exceptional sensitivity, immunity to lighting conditions, and privacy advantages. However, existing wireless sensors are susceptible to environmental interference and unable to capture detailed information from multiple body sites.

Ambient Cardiovascular Monitoring with Metamaterial Textile Sensors.

Contactless sensors embedded in the ambient environment have broad applications in unobtrusive, long-term health monitoring for preventative and personalized healthcare. Microwave radar sensors are an attractive candidate for ambient sensing due to their high sensitivity to physiological motions, ability to penetrate through obstacles and privacy-preserving properties, but practical applications in complex real-world environments have been limited because of challenges associated with background clutter and interference. In this work, we propose a thin and soft textile sensor based on microwave metamaterials that can be easily integrated into ordinary furniture for contactless ambient monitoring of multiple cardiovascular signals in a localized manner.

Implant-to-implant wireless networking with metamaterial textiles.

Implanted bioelectronic devices can form distributed networks capable of sensing health conditions and delivering therapy throughout the body. Current clinically-used approaches for wireless communication, however, do not support direct networking between implants because of signal losses from absorption and reflection by the body. As a result, existing examples of such networks rely on an external relay device that needs to be periodically recharged and constitutes a single point of failure.

Stochastic Exceptional Points for Noise-Assisted Sensing.

Noise is a fundamental challenge for sensors deployed in daily environments for ambient sensing, health monitoring, and wireless networking. Current strategies for noise mitigation rely primarily on reducing or removing noise. Here, we introduce stochastic exceptional points and show the utility to reverse the detrimental effect of noise.

BMAL1 involved in autophagy and injury of thoracic aortic endothelial cells of rats induced by intermittent heat stress through the AMPK/mTOR/ULK1 pathway.

Physiological activities of the body exhibit an obvious biological rhythm. At the core of the circadian rhythm, BMAL1 is the only clock gene whose deletion leads to abnormal physiological functions. However, whether intermittent heat stress influences cardiovascular function by altering the circadian rhythm of clock genes has not been reported.

Key technologies disclosure for the high-g shock tester based on collision principle and experimental study.

The shock tester based on a three-body, single-level velocity amplifier is especially suitable for high-g shock tests of lightweight and compact pieces. This study focuses on disclosing some key technologies that affect whether the velocity amplifier could achieve a high-g level shock experimental environment. Equations describing the first collision are deduced and some key design criteria are proposed.

Theoretical and experimental study of the "superelastic collision effects" used to excite high-g shock environment.

The excitation technology for high-g-level shock environment experiments is currently a topic of interest, for which velocity amplification by collisions of vertically stacked bodies has been used to develop high-g shock tests with great success. This study investigated the superelastic collision effects generated during high-velocity one-dimensional three-body impacts. Theoretical formulae were derived in brief for an analytical investigation of the collisions.

Calcium release-mediated adsorption and lubrication of salivary proteins on resin-based dental composites.

The lack of wear resistance is always a challenge for clinical applications of resin-based dental composites (RBDCs). In this study, the role of the calcium release from RBDCs in the adsorption and lubrication of salivary proteins was investigated, aiming to provide useful insights concerning the development of high-performance RBDCs. Three experimental RBDCs with distinct calcium-releasing capabilities were prepared using calcium phosphate particles as inorganic fillers.

Effect of calcium ions on the adsorption and lubrication behavior of salivary proteins on human tooth enamel surface.

The aim of this study is to investigate the effect of calcium ions on the adsorption and lubrication behavior of salivary proteins on human tooth enamel. Human whole saliva was collected from healthy donors. Three testing groups were calcium ion-enhanced saliva samples with an increased ion concentration of 1 mmol/L, 5 mmol/L, and 10 mmol/L, respectively.

Superadsorbent hydrogel based on lignin and montmorillonite for Cu(II) ions removal from aqueous solution.

Superadsorbent hydrogel was prepared from lignin and montmorillonite for Cu(II) ions removal, and the chemical structure and morphology of the hydrogel were characterized by FT-IR, XRD, SEM and XPS. The swelling kinetics of the prepared hydrogel was investigated, and the result showed that the swelling process fit the Schott second-order dynamic equation. The influences of pH, contact time, Na concentration, and initial Cu(II) ion concentration on adsorption were studied, and the maximum adsorption value was 1.

Research of the role of microstructure in the wear mechanism of canine and bovine enamel.

The relationship between the microstructure and tribological behavior of mammalian tooth enamel has not been fully understood. In this paper, the microstructure, mechanical properties, and tribological behavior of canine (carnivore) and bovine (herbivore) enamel are studied using scanning electronic microscopy and nano-indentation/scratch technique, aiming to reveal the contribution of enamel microstructure to its mechanical and tribological properties. Canine enamel has a microstructure of hard keyhole-like rods embedded in soft inter-rod enamel, and its surface exhibits high resistance against both micro-crack initiation and crack-induced delamination during friction and wear process.

Effect of alcohol stimulation on salivary pellicle formation on human tooth enamel surface and its lubricating performance.

This study was to investigate the salivary pellicle formation on the surface of human tooth enamel and its lubricating behavior under alcohol stimulation. Normal saliva and alcohol-stimulated saliva were collected from a young male volunteer after rinsing mouth with deionized water and different-concentration alcohol aqueous solution, respectively. Saliva-adsorption treatment was conducted in vitro on enamel surface to obtain salivary pellicle.