Dissociation-Precipitation Chemistry of Lithium Polysulfides and Its Correlation to Dynamic Evolution of Cathode-Electrolyte Interphase in Highly Solvating Electrolyte.

Lithium-sulfur (Li-S) batteries has been regarded as one of the most promising next-generation energy storage systems due to their high theoretical energy density. However, the practical application of Li-S batteries is still hindered by the unstable cathode-electrolyte interphase and the early passivation of charge product (Li2S), leading to poor cycling stability and low S utilization. Herein, we propose an electrolyte engineering strategy using highly solvating hexamethylphosphoramide (HMPA) as a co-solvent to elucidate the dissociation-precipitation chemistry of lithium polysulfides (LiPSs).

Electrolyte Chemistry Towards Ultra-High Voltage (4.7 V) And Ultra-Wide Temperature (-30 to 70 °C) LiCoO Batteries.

LiCoO batteries for 3 C electronics demand high charging voltage and wide operating temperature range, which are virtually impossible for existing electrolytes due to aggravated interfacial parasitic reactions and sluggish kinetics. Herein, we report an electrolyte design strategy based on a partially fluorinated ester solvent (i.e.

An Amphiphilic Molecule-Regulated Core-Shell-Solvation Electrolyte for Li-Metal Batteries at Ultra-Low Temperature.

Lithium metal batteries hold great promise for promoting energy density and operating at low temperatures, yet they still suffer from insufficient Li compatibility and slow kinetic, especially at ultra-low temperatures. Herein, we rationally design and synthesize a new amphiphilic solvent, 1,1,2,2-tetrafluoro-3-methoxypropane, for use in battery electrolytes. The lithiophilic segment is readily to solvate Li to induce self-assembly of the electrolyte solution to form a peculiar core-shell-solvation structure.

Tuning the Solvent Alkyl Chain to Tailor Electrolyte Solvation for Stable Li-Metal Batteries.

1,2-Dimethoxyethane (DME) has been considered as the most promising electrolyte solvent for Li-metal batteries (LMBs). However, challenges arise from insufficient Li Coulombic efficiency (CE) and poor anodic stability associated with DME-based electrolytes. Here, we proposed a rational molecular design methodology to tailor electrolyte solvation for stable LMBs, where shortening the middle alkyl chain of the solvent could reduce the chelation ability, while increasing the terminal alkyl chain of the solvent could increase the steric hindrance, affording a diethoxymethane (DEM) solvent with ultra-weak solvation ability.

Tuning the Metal Ions of Prussian Blue Analogues in Separators to Enable High-Power Lithium Metal Batteries.

The Li dendrite issue is the major barrier that limits the implement of Li metal anode practically, especially at high current density. From the perspective of the nucleation and growth mechanism of the Li dendrite, we rationally develop a novel Prussian blue analogues (PBA)-derived separator, where tuning the metal ions bestows the PBAs with open metal site to confine anion movement and thereby afford a high Li transference number (0.78), and PBA with ordered micropores could act as an ionic sieve to selectively extract Li and thereby homogenize Li flux.

Electro-Enhanced Separation of Microsized Oil-in-Water Emulsions via Metallic Membranes: Performance and Mechanistic Insights.

Conventional separation membranes suffer from evitable fouling and flux decrease for water treatment applications. Herein, a novel protocol of electro-enhanced membrane separation is proposed for the efficient treatment of microsized emulsions (∼1 μm) by rationally designing robust electroresponsive copper metallic membranes, which could mitigate oil fouling and coenhance permeance (from ∼1026 to ∼2516 L·m·h·bar) and rejection (from ∼87 to ∼98%). High-flux Cu membranes exhibit superior ductility and electrical conductivity, enabling promising electroactivity.

Distribution, Biotransformation, Pharmacological Effects, Metabolic Mechanism and Safety Evaluation of Platycodin D: A Comprehensive Review.

Platycodonis Radix (Jiegeng), the dried root of Platycodon grandiflorum, is a traditional herb used as both medicine and food. Its clinical application for the treatment of cough, phlegm, sore throat, pulmonary and respiratory diseases has been thousands of years in China. Platycodin D is the main active ingredient in Platycodonis Radix, which belongs to the family of pentacyclic triterpenoid saponins because it contains an oleanolane type aglycone linked with double sugar chains.

Concentrated Electrolytes Widen the Operating Temperature Range of Lithium-Ion Batteries.

The operating temperatures of commercial lithium-ion batteries (LIBs) are generally restricted to a narrow range of -20 to 55 °C because the electrolyte is composed of highly volatile and flammable organic solvents and thermally unstable salts. Herein, the use of concentrated electrolytes is proposed to widen the operating temperature to -20 to 100 °C. It is demonstrated that a 4.

Three-Dimensional (3D) Nanostructured Skeleton Substrate Composed of Hollow Carbon Fiber/Carbon Nanosheet/ZnO for Stable Lithium Anode.

The practical applications of Li metal batteries (LMBs) have long been limited by the obstacles of low Coulombic efficiency (CE) and formation of dendrites on Li metal electrode. Herein, we demonstrated the synthesis of a novel three-dimensional (3D) nanostructured skeleton substrate composed of nitrogen-doped hollow carbon fiber/carbon nanosheets/ZnO (NHCF/CN/ZnO) using 2-methylimidazole (2-MIZ)-coated 3D cloth as a scaffold. The mechanism of formation of this novel hierarchical structure was investigated.

Sodium- and Potassium-Hydrate Melts Containing Asymmetric Imide Anions for High-Voltage Aqueous Batteries.

Aqueous Na- or K-ion batteries could virtually eliminate the safety and cost concerns raised from Li-ion batteries, but their widespread applications have generally suffered from narrow electrochemical potential window (ca. 1.23 V) of aqueous electrolytes that leads to low energy density.

3D Microstructured Scaffolds to Support Photoreceptor Polarization and Maturation.

Blinding disorders of the outer retina involve dysfunction and degeneration of photoreceptors. One potential approach to treat these forms of blindness is to repopulate the outer retina via a simple bolus injection of donor photoreceptors. However, this may not be ideal due to the highly polarized organization of photoreceptors that include apical light sensing photopigments and basal axon terminals.

Neuroendocrine Tumor-Targeted Upconversion Nanoparticle-Based Micelles for Simultaneous NIR-Controlled Combination Chemotherapy and Photodynamic Therapy, and Fluorescence Imaging.

Although neuroendocrine tumors (NETs) are slow growing, they are frequently metastatic at the time of discovery and no longer amenable to curative surgery, emphasizing the need for the development of other treatments. In this study, multifunctional upconversion nanoparticle (UCNP)-based theranostic micelles are developed for NET-targeted and near-infrared (NIR)-controlled combination chemotherapy and photodynamic therapy (PDT), and bioimaging. The theranostic micelle is formed by individual UCNP functionalized with light-sensitive amphiphilic block copolymers poly(4,5-dimethoxy-2-nitrobenzyl methacrylate)-polyethylene glycol (PNBMA-PEG) and Rose Bengal (RB) photosensitizers.

Synthesis of polyvinyl alcohol/cellulose nanofibril hybrid aerogel microspheres and their use as oil/solvent superabsorbents.

Superhydrophobic and crosslinked poly(vinyl alcohol) (PVA)/cellulose nanofibril (CNF) aerogel microspheres were prepared via a combination of the water-in-oil (W/O) emulsification process with the freeze-drying process, followed by thermal chemical vapor deposition of methyltrichlorosilane. The oil phase and the cooling agent were judiciously selected to ensure that the frozen ice microspheres can be easily separated from the emulsion system. The silanized microspheres were highly porous with a bulk density ranging from 4.

Flexible Infrared Responsive Multi-Walled Carbon Nanotube/Form-Stable Phase Change Material Nanocomposites.

Flexible infrared (IR)-responsive materials, such as polymer nanocomposites, that exhibit high levels of IR responses and short response times are highly desirable for various IR sensing applications. However, the IR-induced photoresponses of carbon nanotube (CNT)/polymer nanocomposites are typically limited to 25%. Herein, we report on a family of unique nanocomposite films consisting of multi-walled carbon nanotubes (MWCNTs) uniformly distributed in a form-stable phase change material (PCM) that exhibited rapid, dramatic, reversible, and cyclic IR-regulated responses in air.

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper.

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable.

Poly(vinyl alcohol)/cellulose nanofibril hybrid aerogels with an aligned microtubular porous structure and their composites with polydimethylsiloxane.

Superhydrophobic poly(vinyl alcohol) (PVA)/cellulose nanofibril (CNF) aerogels with a unidirectionally aligned microtubular porous structure were prepared using a unidirectional freeze-drying process, followed by the thermal chemical vapor deposition of methyltrichlorosilane. The silanized aerogels were characterized using various techniques including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, and contact angle measurements. The structure of the aerogels fully filled with polydimethylsiloxane (PDMS) was confirmed by SEM and optical microscopy.

Cellulose nanofibril/reduced graphene oxide/carbon nanotube hybrid aerogels for highly flexible and all-solid-state supercapacitors.

A novel type of highly flexible and all-solid-state supercapacitor that uses cellulose nanofibril (CNF)/reduced graphene oxide (RGO)/carbon nanotube (CNT) hybrid aerogels as electrodes and H2SO4/poly(vinyl alcohol) (PVA) gel as the electrolyte was developed and is reported here. These flexible solid-state supercapacitors were fabricated without any binders, current collectors, or electroactive additives. Because of the porous structure of the CNF/RGO/CNT aerogel electrodes and the excellent electrolyte absorption properties of the CNFs present in the aerogel electrodes, the resulting flexible supercapacitors exhibited a high specific capacitance (i.

Graphene/phase change material nanocomposites: light-driven, reversible electrical resistivity regulation via form-stable phase transitions.

Innovative photoresponsive materials are needed to address the complexity of optical control systems. Here, we report a new type of photoresponsive nanomaterial composed of graphene and a form-stable phase change material (PCM) that exhibited a 3 orders of magnitude change in electrical resistivity upon light illumination while retaining its overall original solid form at the macroscopic level. This dramatic change in electrical resistivity also occurred reversibly through the on/off control of light illumination.

Drug-loaded nanoparticles induce gene expression in human pluripotent stem cell derivatives.

Tissue engineering and advanced manufacturing of human stem cells requires a suite of tools to control gene expression spatiotemporally in culture. Inducible gene expression systems offer cell-extrinsic control, typically through addition of small molecules, but small molecule inducers typically contain few functional groups for further chemical modification. Doxycycline (DXC), a potent small molecule inducer of tetracycline (Tet) transgene systems, was conjugated to a hyperbranched dendritic polymer (Boltorn H40) and subsequently reacted with polyethylene glycol (PEG).

Image-guided and tumor-targeted drug delivery with radiolabeled unimolecular micelles.

Unimolecular micelles formed by dendritic amphiphilic block copolymers poly(amidoamine)-poly(L-lactide)-b-poly(ethylene glycol) conjugated with anti-CD105 monoclonal antibody (TRC105) and 1,4,7-triazacyclononane-N, N', N-triacetic acid (NOTA, a macrocyclic chelator for (64)Cu) (abbreviated as PAMAM-PLA-b-PEG-TRC105) were synthesized and characterized. Doxorubicin (DOX), a model anti-cancer drug, was loaded into the hydrophobic core of the unimolecular micelles formed by PAMAM and PLA via physical encapsulation. The unimolecular micelles exhibited a uniform size distribution and pH-sensitive drug release behavior.

Polyvinyl alcohol-cellulose nanofibrils-graphene oxide hybrid organic aerogels.

Hybrid organic aerogels consisting of polyvinyl alcohol (PVA), cellulose nanofibrils (CNFs), and graphene oxide nanosheets (GONSs) were prepared using an environmentally friendly freeze-drying process. The material properties of these fabricated aerogels were measured and analyzed using various characterization techniques including compression testing, scanning electron microscopy, thermogravimetric (TGA) analysis, Brunauer-Emmet-Teller (BET) surface area analysis, and contact angle measurements. These environmentally friendly, biobased hybrid organic aerogels exhibited a series of desirable properties including a high specific compressive strength and compressive failure strain, ultralow density and thermal conductivity, good thermal stability, and moisture resistance, making them potentially useful for a broad range of applications including thermal insulation.