Viable Escherichia coli enumeration on a polydimethylsiloxane (PDMS) chip with vertical channel-well configuration.

The culture-based methods for viable Escherichia coli (E. coli) detection suffer from long detection time and laborious procedures, whereas the molecule tests and immune recognition technologies lack live/dead E. coli differentiation.

Inoculum size-insensitive susceptibility determination of urine sample based on in-situ measurement of inducible enzyme activity after 20 min of antibiotic exposure.

Background: The empirical antibiotic therapies for bacterial infections cause the emergence and propagation of multi-drug resistant bacteria, which not only impair the effectiveness of existing antibiotics but also raise healthcare costs. To reduce the empirical treatments, rapid antimicrobial susceptibility testing (AST) of causative microorganisms in clinical samples should be conducted for prescribing evidence-based antibiotics. However, most of culture-based ASTs suffer from inoculum effect and lack differentiation of target pathogen and commensals, hampering their adoption for evidence-based antibiotic prescription.

Enzymatic Antimicrobial Susceptibility Testing with Bacteria Identification in 30 min.

Rapid antimicrobial susceptibility testing (AST) with the ability of bacterial identification is urgently needed for evidence-based antibiotic prescription. Herein, we propose an enzymatic AST (enzyAST) that employs β-d-glucuronidase as a biomarker to identify pathogens and profile phenotypic susceptibilities simultaneously. EnzyAST enables to offer binary AST results within 30 min, much faster than standard methods (>16 h).

An On-Chip Viscoelasticity Sensor for Biological Fluids.

There are so many non-Newtonian fluids in our daily life, such as milk, blood, cytoplasm, and mucus, most of which are viscoelastic heterogeneous liquid containing cells, inorganic ion, metabolites, and hormones. In microfluidic microparticle-manipulating applications, the target particles are practically distributed within the biological fluids like blood and urine. The viscoelasticity of biological fluid is constantly ignored for simplicity especially when the fluid is substantially diluted and contains rather complex components.

All-In-One Viability Assay for Multi-dimensional Detection of Uncomplicated Urinary Tract Infections.

The urinary tract infections by antibiotic-resistant bacteria have been a serious public health problem and increase the healthcare costs. The conventional technologies of diagnosis and antimicrobial susceptibility testing (AST) relying on multiple culture-based assays are time-consuming and labor-intensive and thus compel the empirical antimicrobial therapies to be prescribed, fueling the prevalence of antimicrobial resistance. Herein, we propose an all-in-one viability assay in an enclosed 3D microwell array chip, termed digital β-d-glucuronidase (GUS)-AST assay.

Investigation of particle manipulation mechanism and size sorting strategy in a double-layered microchannel.

Traditionally, comprehensive laboratorial experiments on newly proposed microfluidic devices are necessary for theoretical validation, technological design, methodological calibration and optimization. Multiple parameters and characteristics, such as the flow rate, particle size, microchannel dimensions, , should be studied by controlled trials, which could inevitably result in extensive experiments and a heavy burden on researchers. In this work, a novel numerical model was introduced to simulate particle migration within a complicated double-layered microchannel.

Mechanism and Effects of Cellular Creep in a Microfluidic Filter.

Biomicroparticles such as proteins, bacterium, and cells are known to be viscoelastic, which significantly affects their performance in microfluidic applications. However, the exact effects and the quantitative study of cellular viscoelastic creep within different applications remain unclear. In this study, the cellular-deforming evolution within a filter unit was studied using a multiphysics numerical model.

Sheathless Separation of Cyanobacterial by Shape Using Viscoelastic Microfluidics.

Cyanobacteria have a wide range of impact on natural ecosystems, and have been recognized as potentially rich sources of pharmacological and structurally interesting secondary metabolites. To better understand the basic molecular processes and mechanisms that influence and regulate the growth (like length) of cyanobacteria, or connections between environment, genotype, and phenotype, it would be essential to separate shape-synchronized cyanobacterial cell populations with relatively uniform length and size. This work proposes a novel and efficient method to separate cyanobacterial by shape (rod aspect ratio) using viscoelastic microfluidics in a straight channel with expansion-contraction cavity arrays (ECCA channel).

Mechanical Strain-Enabled Reconstitution of Dynamic Environment in Organ-on-a-Chip Platforms: A Review.

Organ-on-a-chip (OOC) uses the microfluidic 3D cell culture principle to reproduce organ- or tissue-level functionality at a small scale instead of replicating the entire human organ. This provides an alternative to animal models for drug development and environmental toxicology screening. In addition to the biomimetic 3D microarchitecture and cell-cell interactions, it has been demonstrated that mechanical stimuli such as shear stress and mechanical strain significantly influence cell behavior and their response to pharmaceuticals.

Modular and Self-Contained Microfluidic Analytical Platforms Enabled by Magnetorheological Elastomer Microactuators.

Portability and low-cost analytic ability are desirable for point-of-care (POC) diagnostics; however, current POC testing platforms often require time-consuming multiple microfabrication steps and rely on bulky and costly equipment. This hinders the capability of microfluidics to prove its power outside of laboratories and narrows the range of applications. This paper details a self-contained microfluidic device, which does not require any external connection or tubing to deliver insert-and-use image-based analysis.

On-Chip Optical Detection of Viruses: A Review.

The current outbreak of the coronavirus disease-19 (COVID-19) pandemic worldwide has caused millions of fatalities and imposed a severe impact on our daily lives. Thus, the global healthcare system urgently calls for rapid, affordable, and reliable detection toolkits. Although the gold-standard nucleic acid amplification tests have been widely accepted and utilized, they are time-consuming and labor-intensive, which exceedingly hinder the mass detection in low-income populations, especially in developing countries.

Correction: Modular off-chip emulsion generator enabled by a revolving needle.

Correction for 'Modular off-chip emulsion generator enabled by a revolving needle' by Yuxin Zhang et al., Lab Chip, 2020, 20, 4592-4599, DOI: 10.1039/D0LC00939C.

Modular off-chip emulsion generator enabled by a revolving needle.

Microfluidic chips have demonstrated unparalleled abilities in droplet generation, including precise control over droplet size and monodispersity. And yet, their rather complicated microfabrication process and operation can be a barrier for inexperienced researchers, which hinders microdroplets from unleashing their potential in broader fields of research. Here, we attempt to remove this barrier by developing an integrated and modular revolving needle emulsion generator (RNEG) to achieve high-throughput production of uniformly sized droplets in an off-chip manner.

A Review of Secondary Flow in Inertial Microfluidics.

Inertial microfluidic technology, which can manipulate the target particle entirely relying on the microchannel characteristic geometry and intrinsic hydrodynamic effect, has attracted great attention due to its fascinating advantages of high throughput, simplicity, high resolution and low cost. As a passive microfluidic technology, inertial microfluidics can precisely focus, separate, mix or trap target particles in a continuous and high-flow-speed manner without any extra external force field. Therefore, it is promising and has great potential for a wide range of industrial, biomedical and clinical applications.

Sheathless separation of microalgae from bacteria using a simple straight channel based on viscoelastic microfluidics.

Microalgae cells have been recognized as a promising sustainable resource to meet worldwide growing demands for renewable energy, food, livestock feed, water, cosmetics, pharmaceuticals, and materials. In order to ensure high-efficiency and high-quality production of biomass, biofuel, or bio-based products, purification procedures prior to the storage and cultivation of the microalgae from contaminated bacteria are of great importance. The present work proposed and developed a simple, sheathless, and efficient method to separate microalgae Chlorella from bacteria Bacillus Subtilis in a straight channel using the viscoelasticity of the medium.

Liquid metal-filled magnetorheological elastomer with positive piezoconductivity.

Conductive elastic composites have been used widely in soft electronics and soft robotics. These composites are typically a mixture of conductive fillers within elastomeric substrates. They can sense strain via changes in resistance resulting from separation of the fillers during elongation.

High-Throughput, Off-Chip Microdroplet Generator Enabled by a Spinning Conical Frustum.

Although droplet-based microfluidics has been broadly used as a versatile tool in biology, chemistry, and nanotechnology, its rather complicated microfabrication process and the requirement of specialized hardware and operating skills hinder researchers fully unleashing the potential of this powerful platform. Here, we develop an integrated microdroplet generator enabled by a spinning conical frustum for the versatile production of near-monodisperse microdroplets in a high-throughput and off-chip manner. The construction and operation of this generator are simple and straightforward without the need of microfabrication, and we demonstrate that the generator is able to passively and actively control the size of the produced microdroplets.

Fundamentals of Differential Particle Inertial Focusing in Symmetric Sinusoidal Microchannels.

Focusing and separation of particles such as cells at high throughput is extremely attractive for biomedical applications. Particle manipulation based on inertial effects requires a high flow speed and thus is well-suited to high-throughput applications. Recently, inertial focusing and separation using curvilinear microchannels has been attracting a great amount of interest because of the linear structure for parallelization, small device footprint, superior particle-focusing performance, and easy implementation of particle separation.

The Continuous Concentration of Particles and Cancer Cell Line Using Cell Margination in a Groove-Based Channel.

In the capillary venules, blood cells auto-separate with red blood cells aggregating near the centre of vessel and the nucleated cells marginating toward the wall of vessel. In this experiment, we used cell margination to help enrich the Jurkat cells via a groove-based channel which provides a vertical expansion-contraction structure, wherein the red blood cells invade the grooves and push the Jurkat cells to the bottom of the channel. The secondary flows induced by the anisotropic grooves bring the Jurkat cells to the right sidewall.

Microfluidic Mass Production of Stabilized and Stealthy Liquid Metal Nanoparticles.

Functional nanoparticles comprised of liquid metals, such as eutectic gallium indium (EGaIn) and Galinstan, present exciting opportunities in the fields of flexible electronics, sensors, catalysts, and drug delivery systems. Methods used currently for producing liquid metal nanoparticles have significant disadvantages as they rely on both bulky and expensive high-power sonication probe systems, and also generally require the use of small molecules bearing thiol groups to stabilize the nanoparticles. Herein, an innovative microfluidics-enabled platform is described as an inexpensive, easily accessible method for the on-chip mass production of EGaIn nanoparticles with tunable size distributions in an aqueous medium.

Simple, low-cost fabrication of semi-circular channel using the surface tension of solder paste and its application to microfluidic valves.

This work presents a simple, low-cost method to fabricate semi-circular channels using solder paste, which can amalgamate the cooper surface to form a half-cylinder mold using the surface tension of Sn-Pd alloy (the main component in solder paste). This technique enables semi-circular channels to be manufactured with different dimensions. These semi-circular channels will then be integrated with a polymethylmethacrylate frame and machine screws to create miniaturized, portable microfluidic valves for sequential liquid delivery and particle synthesis.

Enhanced particle self-ordering in a double-layer channel.

In this work, a novel double-layer microfluidic device for enhancing particle focusing was presented. The double-layer device consists of a channel with expansion-contraction array and periodical slanted grooves. The secondary flows induced by the grooves modulate the flow patterns in the expansion-contraction-array (ECA) channel, further affecting the particle migration.

Liquid metal-based amalgamation-assisted lithography for fabrication of complex channels with diverse structures and configurations.

Numerous lab-on-a-chip applications benefit from channels with complex structures and configurations in the areas of tissue engineering and clinical diagnostics. The current fabrication approaches require time-consuming, complicated processes and bulky, expensive facilities. In this work, we propose a novel method for the fabrication of complex channels with the assistance of amalgamation of liquid metal with copper tape.

Recent progress of particle migration in viscoelastic fluids.

Recently, research on particle migration in non-Newtonian viscoelastic fluids has gained considerable attention. In a viscoelastic fluid, three dimensional (3D) particle focusing can be easily realized in simple channels without the need for any external force fields or complex microchannel structures compared with that in a Newtonian fluid. Due to its promising properties for particle precise focusing and manipulation, this field has been developed rapidly, and research on the field has been shifted from fundamentals to applications.