Study of Time-Resolved Dynamics in Turbid Medium Using a Single-Cavity Dual-Comb Laser.

In measuring cerebral blood flow (CBF) noninvasively using optical techniques, diffusing-wave spectroscopy is often combined with near-infrared spectroscopy to obtain a reliable blood flow index. Measuring the blood flow index at a determined depth remains the ultimate goal. In this study, we present a simple approach using dual-comb lasers where we simultaneously measure the absorption coefficient (μ), the reduced scattering coefficient (μ ), and dynamic properties.

High-sensitivity dual-comb and cross-comb spectroscopy across the infrared using a widely tunable and free-running optical parametric oscillator.

Dual-comb spectroscopy (DCS) enables high-resolution measurements at high speeds without the trade-off between resolution and update rate inherent to mechanical delay scanning. However, high complexity and limited sensitivity remain significant challenges for DCS systems. We address these via a wavelength-tunable dual-comb optical parametric oscillator (OPO) combined with an up-conversion detection method.

THz-TDS with gigahertz Yb-based dual-comb lasers: noise analysis and mitigation strategies.

We investigate terahertz time-domain spectroscopy using a low-noise dual-frequency-comb laser based on a single spatially multiplexed laser cavity. The laser cavity includes a reflective biprism, which enables generation of a pair of modelocked output pulse trains with slightly different repetition rates and highly correlated noise characteristics. These two pulse trains are used to generate the THz waves and detect them by equivalent time sampling.

Scan-less 3D microscopy based on spatiotemporal encoding on a single-cavity dual-comb laser.

Dual-comb microscopy enables high-speed and high-precision optical sampling by simultaneously extracting both amplitude and phase information from the interference signals with frequency division multiplexing. In this Letter, we introduce a spatiotemporal encoding approach for dual-comb microscopy that overcomes previous limitations such as mechanical scanning, low sampling efficiency, and system complexity. By employing free-space angular-chirp-enhanced delay (FACED) and a low-noise single-cavity dual-comb laser, we achieve scan-less 3D imaging with nanometer precision and a 3D distance-imaging rate of 330 Hz, restricted only by the repetition rate difference of the dual-comb laser.

Coherently averaged dual-comb spectroscopy with a low-noise and high-power free-running gigahertz dual-comb laser: erratum.

This erratum corrects a typographical error in equation (8) of our published paper [Opt. Express31, 7103 (2023)10.1364/OE.

Coherently averaged dual-comb spectroscopy with a low-noise and high-power free-running gigahertz dual-comb laser.

We present a new type of dual optical frequency comb source capable of scaling applications to high measurement speeds while combining high average power, ultra-low noise operation, and a compact setup. Our approach is based on a diode-pumped solid-state laser cavity which includes an intracavity biprism operated at Brewster angle to generate two spatially-separated modes with highly correlated properties. The 15-cm-long cavity uses an Yb:CALGO crystal and a semiconductor saturable absorber mirror as an end mirror to generate more than 3 W average power per comb, below 80 fs pulse duration, a repetition rate of 1.

Free-running Yb:KYW dual-comb oscillator in a MOPA architecture.

Single-cavity dual-combs comprise a rapidly emerging technology platform suitable for a wide range of applications like optical ranging, equivalent time sampling, and spectroscopy. However, it remains a challenging task to develop a dual-comb system that exhibits low relative frequency fluctuations to allow for comb line resolved measurements, while simultaneously offering high average power and short pulse durations. Here we combine a passively cooled and compact dual-comb solid-state oscillator with a pair of core-pumped Yb-fiber-based amplifiers in a master-oscillator power-amplifier (MOPA) architecture.

Efficient pump-probe sampling with a single-cavity dual-comb laser: Application in ultrafast photoacoustics.

Ultrafast pump-probe measurements are used to characterize various samples, such as biological cells, bulk, and thin-film structures. However, typical implementations of the pump-probe apparatus are either slow or complex and costly hindering wide deployment. Here we combine a single-cavity dual-comb laser with a simple experimental setup to obtain pump-probe measurements with ultra-high sensitivity, fast acquisition, and high timing precision over long optical delay scan ranges of 12.

Dynamic and precise long-distance ranging using a free-running dual-comb laser.

Long-distance ranging is a crucial tool for both industrial and scientific applications. Laser-based distance metrology offers unprecedented precision making it the ideal approach for many deployments. In particular, dual-comb ranging is favorable due to its inherently high precision and sampling rate.

Dual-comb optical parametric oscillator in the mid-infrared based on a single free-running cavity.

We demonstrate a free-running single-cavity dual-comb optical parametric oscillator (OPO) pumped by a single-cavity dual-comb solid-state laser. The OPO ring cavity contains a single periodically-poled MgO-doped LiNbO (PPLN) crystal. Each idler beam has more than 245-mW average power at 3550 nm and 3579 nm center wavelengths (bandwidth 130 nm).

Timing jitter characterization of free-running dual-comb laser with sub-attosecond resolution using optical heterodyne detection.

Pulse trains emitted from dual-comb systems are designed to have low relative timing jitter, making them useful for many optical measurement techniques such as optical ranging and spectroscopy. However, the characterization of low-jitter dual-comb systems is challenging because it requires measurement techniques with high sensitivity. Motivated by this challenge, we developed a technique based on an optical heterodyne detection approach for measuring the relative timing jitter of two pulse trains.

Absolute SESAM characterization via polarization-resolved non-collinear equivalent time sampling.

Semiconductor saturable absorber mirrors (SESAMs) have enabled a wide variety of modelocked laser systems, which makes measuring their nonlinear properties an important step in laser design. Here, we demonstrate complete characterization of SESAMs using an equivalent time sampling apparatus. The light source is a free-running dual-comb laser, which produces a pair of sub-150-fs modelocked laser outputs at 1051 nm from a single cavity.

Water-window high harmonic generation with 0.8-µm and 2.2-µm OPCPAs at 100 kHz.

We compare the generation of high-order harmonics in the water window (283-543 eV) with 0.8-µm and 2.2-µm few-cycle lasers at a pulse repetition rate of 100 kHz.

Picosecond ultrasonics with a free-running dual-comb laser.

We present a free-running 80-MHz dual-comb polarization-multiplexed solid-state laser which delivers 1.8 W of average power with 110-fs pulse duration per comb. With a high-sensitivity pump-probe setup, we apply this free-running dual-comb laser to picosecond ultrasonic measurements.

High-power few-cycle near-infrared OPCPA for soft X-ray generation at 100 kHz.

We present a near-infrared optical parametric chirped-pulse amplifier (OPCPA) and soft X-ray (SXR) high-harmonic generation system. The OPCPA produces few-cycle pulses at a center wavelength of 800 nm and operates at a high repetition rate of 100 kHz. It is seeded by fully programmable amplitude and phase controlled ultra-broadband pulses from a Ti:sapphire oscillator.

Femtosecond dual-comb Yb:CaF laser from a single free-running polarization-multiplexed cavity for optical sampling applications.

Dual optical frequency combs are an appealing solution to many optical measurement techniques due to their high spectral and temporal resolution, high scanning speed, and lack of moving parts. However, industrial and field-deployable applications of such systems are limited due to a high-cost factor and intricacy in the experimental setups, which typically require a pair of locked femtosecond lasers. Here, we demonstrate a single oscillator which produces two mode-locked output beams with a stable repetition rate difference.

Reduction of laser-intensity-correlated noise in high-harmonic generation.

We present a scheme for correcting the spectral fluctuations of high-harmonic radiation. We show that the fluctuations of the extreme-ultraviolet (XUV) spectral power density can be predicted solely by monitoring the generating laser pulses; this method is in contrast with traditional balanced detection used in optical spectroscopy, where a replica of the signal is monitored. Such possibility emerges from a detailed investigation of high-harmonic generation (HHG) noise.

Programmable pulse shaping for time-gated amplifiers.

We experimentally demonstrate a novel use of a spatial light modulator (SLM) for shaping ultrashort pulses in time-gated amplification systems. We show that spectral aberrations because of the device's pixelated nature can be avoided by introducing a group delay offset to the pulse via the SLM, followed by a time-gated amplification. Because of phase wrapping, a large delay offset yields a nearly-periodic grating-like phase function (or a phase grating).

High-power OPCPA generating 1.7 cycle pulses at 2.5 µm.

We present a high-power mid-infrared (mid-IR) optical parametric chirped-pulse amplifier (OPCPA) generating 14.4 fs pulses centered at 2.5 µm with an average power of 12.

Decoupling phase-matching bandwidth and interaction geometry using non-collinear quasi-phase-matching gratings.

In optical parametric amplification (OPA) of broadband pulses, a non-collinear angle between the interacting waves is typically introduced in order to achieve broadband phase-matching. Consequently, bandwidth and beam geometry are closely linked. This coupling restricts the geometrical layout of an OPA system.