Survivorship of the Stryker Ascend Flex uncemented metaphyseal bearing stem at a minimum 2- and 5-year follow-up.

Introduction: The Ascend Flex short stem implant has been reported to have good early clinical outcomes and low revision rates. This retrospective study aimed to evaluate the early to mid-term radiographic and clinical outcomes of patients who underwent primary shoulder arthroplasty with this implant.

Methods: All consecutive patients who underwent primary shoulder arthroplasty with short uncemented Ascend Flex stems with a minimum of 24-month follow-up were included.

Superior functional outcome following reverse shoulder arthroplasty compared to hemiarthroplasty for displaced three- and four-part fractures in patients 65 and older: results from a prospective multicenter randomized controlled trial - The shoulder hemiarthroplasty or reverse polarity arthoplasty (SHeRPA) trial.

Background: Acute unreconstructible 3- or 4-part proximal humerus fractures can be treated with hemiarthroplasty or reverse polarity shoulder arthroplasty. Randomized trials using implants from multiple different companies or uncemented implants have found superior results with reverse polarity arthroplasty.

Hypothesis: We tested the hypothesis that cemented reverse polarity arthroplasty produces a superior outcome compared to cemented hemiarthroplasty using one implant system in patients aged 65 years and over at 12 months follow-up as measured with the Constant Score.

Clinical outcome of wedged glenoid reconstruction in anatomic total shoulder arthroplasty for osteoarthritic retroverted glenoid: a minimum 2-year follow-up.

Background: Glenoid retroversion and humeral head subluxation is a progressive disorder due to abnormal force coupling and increased contact force. In situ placement of anatomic total shoulder arthroplasty (TSA) components in this scenario results in edge loading, progressive subluxation, and early failure. Wedged glenoid components have been demonstrated to improve glenohumeral alignment, but have not been correlated with mid-term clinical outcomes.

Can Shoulder Impairments Be Classified From 3-Dimensional Kinematics Using Inertial Sensors?

Inertial sensors may help clinicians to assess patients' movement and potentially support clinical decision making. Our aim was to determine whether shoulder range of motion during movement tasks measured using inertial sensors is capable of accurately discriminating between patients with different shoulder problems. Inertial sensors were used to measure 3-dimensional shoulder motion during 6 tasks of 37 patients on the waiting list for shoulder surgery.

Clinical and radiologic outcomes of Lima ProMade custom 3D-printed glenoid components in primary and revision reverse total shoulder arthroplasty with severe glenoid bone loss: a minimum 2-year follow-up.

Background: The purpose of this study is to report the clinical and radiologic outcomes of patients undergoing primary or revision reverse total shoulder arthroplasty using custom 3D-printed components to manage severe glenoid bone loss with a minimum of 2-year follow-up.

Methods: Following ethical approval, patients were identified and invited to participate. Inclusion criteria were (1) severe glenoid bone loss necessitating the need for custom implants and (2) patients with definitive glenoid and humeral components implanted more than 2 years prior.

Survivorship of Allologous Structural Bone Graft at a Minimum of 2 Years When Used to Address Significant Glenoid Bone Loss in Revision Shoulder Arthroplasty: A Computed Tomographic and Clinical Review.

Background: This study assesses outcomes in revision shoulder replacements where the glenoid bone loss was managed using a structural allograft (donated femoral head) in combination with a trabecular titanium (TT) implant.

Methods: We contacted patients who had undergone revision shoulder arthroplasty using the Lima Axioma TT metal-backed glenoid with an allologous bone graft as a composite who were over 2 years since surgery. Patients underwent computerd tomography evaluation, clinical review, and scoring preoperatively, at 6 months and the latest follow-up.

The Shoulder Lever Test - Technical Tip for Instability Assessment in Large Shoulders.

Introduction: The classical shoulder tests for instability of the glenohumeral joint are the load and shift and drawer tests. Here, the humeral head is gripped between fingers and thumb to assess translation. This can be challenging to perform accurately in obese individuals and muscular athletes.

Assessing the required glenoid peg penetration in native scapula when bone graft is used during primary and revision shoulder arthroplasty.

Aims: Achieving purchase in native glenoid bone is essential for the stability of the glenoid baseplate when bone graft is used to address bone loss in both primary and revision shoulder arthroplasty procedures. The aim of this study is to assess the required depth of the baseplate peg in native bone when bone graft is used to result in satisfactory integration.

Patients And Methods: The CT scans of patients who underwent either primary or revision arthroplasty procedures with bone graft using the SMR Axioma Trabecular Titanium (TT) Metal Backed glenoid system were assessed.

The role of biodegradable spacer implantation under local anesthesia for patients with massive rotator cuff tears and significant medical comorbidities.

Background: Massive rotator cuff tears are common, and the incidence increases with age. They are a challenging problem to deal with as many are irreparable. While there are a host of surgical options available, these can be prolonged procedures requiring general anesthesia and thus not suitable for elderly patients or those with significant medical comorbidities.

Shoulder hydrodilatation for primary, post-traumatic and post-operative adhesive capsulitis.

Background: Adhesive capsulitis (frozen shoulder) is characterised by pain and loss of range of motion of the glenohumeral joint. It can be present as primary (idiopathic) or secondary to surgery, trauma or other conditions that restrict the use of the shoulder joint. Various treatment options have been adopted including physiotherapy, manipulation under anaesthetic, hydrodilatation and arthroscopic or open capsular release but the optimal form of management remains uncertain.

Measuring outcomes in rotator cuff disorders.

Measuring the outcome of treatment for rotator cuff disorders has evolved over the last three decades. Objective surgeon-derived outcomes such as clinical examination findings and imaging of the rotator cuff have the limitation of marginalising the patients perception of their condition. Patient reported outcome measures (PROMs) have evolved and become popular in an attempt to demonstrate meaningful outcome data.

Superior capsular reconstruction for irreparable rotator cuff tears: A literature review and specialist practice report.

Background: Recent evidence continues to confirm the effectiveness of arthroscopic superior capsular reconstruction (SCR) in relieving pain and improving function in an irreparable cuff deficient shoulder. This paper presents an up-to-date literature review on SCRand a tertiary referral unit experience in the United Kingdom.

Methods: Data was prospectively collected on patients undergoing SCR for irreparable rotator cuff tears using a dermal allograft.

The biomechanics of the rotator cuff in health and disease - A narrative review.

The rotator cuff has an important role in the stability and function of the glenohumeral joint. It is a complex anatomic structure commonly affected by injury such as tendinopathy and cuff tears. The rotator cuff helps to provide a stabilising effect to the shoulder joint by compressing the humeral head against the glenoid cavity via the concavity compression mechanism.

Trends in rotator cuff surgery: Research through the decades.

Introduction: The aim of this study is to analyse the most cited articles in rotator cuff surgery and identify trends in topics by decade to see which areas may still need further investigation.

Methods: Journal Citation Index was searched to find articles using the search terms pertaining to "rotator cuff repair". All articles were ranked according to most cited, and then further analysed to find most cited articles in each decade.

Management of rotator cuff tears - Key historical landmarks.

The management of rotator cuff pathology has developed over hundreds of years. In this article, we take a journey from the early days, in order to understand how we have reached our modern-day practice. Initially our understanding of rotator cuff pathology was based on cadaveric anatomical findings and this has enhanced over the years by the development of radiological and surgical techniques.

The Effect of Type of Femoral Component Fixation on Mortality and Morbidity after Hip Hemiarthroplasty: A Systematic Review and Meta-Analysis.

Background: Hip hemiarthroplasty is a well-established treatment of displaced femoral neck fracture, although debate exists over whether cemented or uncemented fixation is superior. Uncemented prostheses have typically been used in younger, healthier patients and cemented prostheses in older patients with less-stable bone. Also, earlier research has suggested that bone cement has cytotoxic effects and may trigger cardiovascular and respiratory adverse events.

An OrthoRadiological review of superior capsularreconstruction in the shoulder.

Superior capsular reconstruction (SCR) is an emerging surgical technique used to treat patients with irreparable rotator cuff tears. In this procedure, a graft is attached between the superior glenoid and the greater tuberosity, with the aim of optimising glenohumeral joint function and stability. Pre-operative radiological evaluation of patients having such cuff tears is crucial for appropriate patient selection.

Survivorship of autologous structural bone graft at a minimum of 2 years when used to address significant glenoid bone loss in primary and revision shoulder arthroplasty: a computed tomographic and clinical review.

Background: Severe glenoid bone loss remains a challenge in patients requiring shoulder arthroplasty and often requires autogenous bone grafting. The purpose of this study was to assess the integrity of the bone graft at 2 years in a series of primary and revision shoulder replacements where glenoid bone loss was managed using a structural autograft (humeral head or iliac crest bone graft) in combination with a trabecular titanium (TT) implant.

Methods: Ethical approval was sought, and the study has a portfolio study status by the NIHR (17/YH/0318).

The unicortical sternoclavicular joint reconstruction using synthetic graft.

Sternoclavicular joint injuries represent 5% of all injuries to the shoulder complex. We report a safe and reproducible technique for reconstruction of anterior sternoclavicular joint dislocations, employing a synthetic graft using a unicortical technique with minimal dissection anterior to the joint.

Working through the COVID-19 outbreak: Rapid review and recommendations for MSK and allied heath personnel.

The coronavirus (COVID-19) pandemic has caused the world to undergo unprecedented change in a short space of time. This disease has devastated the economy, infringed personal freedom, and has taken a toll on healthcare systems worldwide. This review aims to highlight aspects of this pandemic with a specific emphasis on musculoskeletal work within the secondary care setting.

Does posterior half-wedge augmented glenoid restore version and alignment in total shoulder arthroplasty for the B2 glenoid?

Introduction: Walch type B2 has biconcave glenoid with posterior erosion, bone loss and humeral head subluxation. This leads to decreased glenohumeral contact area and increased contact pressure. During total shoulder arthroplasty(TSA), uncorrected retroversion causes eccentric loading and failure of glenoid component.

The Ellipse modification of the Friedman method for measuring glenoid version.

Aims: Accurate measurement of the glenoid version is important in performing total shoulder arthroplasty (TSA). Our aim was to evaluate the Ellipse method, which involves formally defining the vertical mid-point of the glenoid prior to measuring the glenoid version and comparing it with the 'classic' Friedman method.

Methods: This was a retrospective study which evaluated 100 CT scans for patients who underwent a primary TSA.

The Incidence of Traumatic Posterior and Combined Labral Tears in Patients Undergoing Arthroscopic Shoulder Stabilization.

Background: Posterior and combined shoulder instabilities have been reported as accounting for only 2% to 5% of cases. More recently, an increased incidence of posterior capsulolabral tear has been reported.

Purpose: To assess the incidence of posterior and combined labral tears in a large cohort of patients with surgically treated shoulder labral tears.