Biomechanical Behavior of Dynamic vs. Static Distal Locking Intramedullary Nails in Subtrochanteric Femur Fractures.

Objective: Hip fractures are one of the most frequent fractures presenting to the emergency department and orthopedic trauma teams. The aim of this study was to determine the best indication and therapeutic technique for subtrochanteric fractures and unifying criteria when choosing the most suitable type of nail.

Materials And Methods: To analyze the influence of the material and the type of distal locking of intramedullary nails (static or dynamic), a femur model with a fracture in the subtrochanteric region stabilized with a long Gamma intramedullary nail was applied using finite element method (FEM) simulation.

Three-Dimensional Computational Model Simulating the Initial Callus Growth during Fracture Healing in Long Bones: Application to Different Fracture Types.

Bone fractures are among the most common and potentially serious injuries to the skeleton, femoral shaft fractures being especially severe. Thanks to recent advances in the area of in silico analysis, several approximations of the bone healing process have been achieved. In this context, the objective of this work was to simulate the initial phase of callus formation in long bones, without a pre-meshed domain in the 3D space.

A new approach for initial callus growth during fracture healing in long bones.

The incidence of bone fracture has become a major clinical problem on a worldwide scale. In the past two decades there has been an increase in the use of computational tools to analyse the bone fracture problem. In several works, various study cases have been analysed to compare human and animal bone fracture healing.

Comparative analysis of the biomechanical behavior of anterograde/retrograde nailing in supracondylar femoral fractures.

Supracondylar femoral fractures account for a noticeable percentage of the femoral shaft fractures, affecting two etiological groups: high energy trauma in young men, with good bone quality, and older women with osteoporotic femur. Surgical treatment of those kind of fractures remains controversial, with different surgical options such as plate and sliding barrel locking condylar plate, less invasive stabilization system (LISS) or intramedullary nailing, which has emerged as a new fixation choice in the treatment of that type of fractures. The present work performs a comparative study about the biomechanical behavior of anterograde and retrograde nailing in supracondylar femoral fractures type A, in order to determine the best choice of nailing and locking configuration.

A comparative study of hyperelastic constitutive models for colonic tissue fitted to multiaxial experimental testing.

For colonic stents design, the interaction with colonic tissue is essential in order to characterize the appropriate radial stiffness which provides a minimum lumen for intestinal transit to be maintained. It is therefore important to develop suitable constitutive models allowing the mechanical behavior of the colon tissue to be characterized. The present work investigates the biomechanical behavior of colonic tissue by means of biaxial tests carried out on different parts of the colonic tract taken from several porcine specimens.

Influence of screw combination and nail materials in the stability of anterograde reamed intramedullary nail in distal femoral fractures.

Intramedullary nailing (IM) is a technique universally accepted to treat femoral diaphyseal fractures. The treatment of fractures located in the distal third remains a controversial issue though. A finite element model of the femur has been developed, analyzing distal fractures with several gap sizes combined with different interlocking combinations of distal screws with one oblique screw proximally to stabilize the intramedullary nail.

Influence of gap size, screw configuration, and nail materials in the stability of anterograde reamed intramedullary nail in femoral transverse fractures.

Femoral shaft fractures are among the most severe injuries of the skeleton. They are associated with high morbidity and mortality. The most appropriate treatment depending on the type of fracture and location level should be chosen.

A methodology for the customized design of colonic stents based on a parametric model.

The choice of necessary stent properties depends mainly on the length of the stenosis and degree of occlusion. So a stent design with variable radial stiffness along its longitudinal axis would be a good option. The design proposed corresponds to a tube-based stent with closed diamond-shaped cells made from a NiTi alloy.

A predictive mechanical model for evaluating vertebral fracture probability in lumbar spine under different osteoporotic drug therapies.

Osteoporotic vertebral fractures represent a major cause of disability, loss of quality of life and even mortality among the elderly population. Decisions on drug therapy are based on the assessment of risk factors for fracture from bone mineral density (BMD) measurements. A previously developed model, based on the Damage and Fracture Mechanics, was applied for the evaluation of the mechanical magnitudes involved in the fracture process from clinical BMD measurements.

Study of the behavior of a bell-shaped colonic self-expandable NiTi stent under peristaltic movements.

Managing bowel obstruction produced by colon cancer requires an emergency intervention to patients usually in poor conditions, and it requires creating an intestinal stoma in most cases. Regardless of that the tumor may be resectable, a two-stage surgery is mandatory. To avoid these disadvantages, endoscopic placement of self-expanding stents has been introduced more than 10 years ago, as an alternative to relieve colonic obstruction.

Development and kinematic verification of a finite element model for the lumbar spine: application to disc degeneration.

The knowledge of the lumbar spine biomechanics is essential for clinical applications. Due to the difficulties to experiment on living people and the irregular results published, simulation based on finite elements (FE) has been developed, making it possible to adequately reproduce the biomechanics of the lumbar spine. A 3D FE model of the complete lumbar spine (vertebrae, discs, and ligaments) has been developed.

A mechanical model for predicting the probability of osteoporotic hip fractures based in DXA measurements and finite element simulation.

Background: Osteoporotic hip fractures represent major cause of disability, loss of quality of life and even mortality among the elderly population. Decisions on drug therapy are based on the assessment of risk factors for fracture, from BMD measurements. The combination of biomechanical models with clinical studies could better estimate bone strength and supporting the specialists in their decision.

Applications of finite element simulation in orthopedic and trauma surgery.

Research in different areas of orthopedic and trauma surgery requires a methodology that allows both a more economic approach and the ability to reproduce different situations in an easy way. Simulation models have been introduced recently in bioengineering and could become an essential tool in the study of any physiological unity, regardless of its complexity. The main problem in modeling with finite elements simulation is to achieve an accurate reproduction of the anatomy and a perfect correlation of the different structures, in any region of the human body.

Design of splints based on the NiTi alloy for the correction of joint deformities in the fingers.

Background: The proximal interphalange joint (PIP) is fundamental for the functional nature of the hand. The contracture in flexion of the PIP, secondary to traumatisms or illnesses leads to an important functional loss. The use of correcting splints is the common procedure for treating this problem.

Study of bone remodeling of two models of femoral cementless stems by means of DEXA and finite elements.

Background: A hip replacement with a cemented or cementless femoral stem produces an effect on the bone called adaptive remodelling, attributable to mechanical and biological factors. All of the cementless prostheses designs try to achieve an optimal load transfer in order to avoid stress-shielding, which produces an osteopenia.Long-term densitometric studies taken after implanting ABG-I and ABG-II stems confirm that the changes made to the design and alloy of the ABG-II stem help produce less proximal atrophy of the femur.

Mechanical comparative analysis of stents for colorectal obstruction.

The goal of this work is the mechanical comparison of different types of stents for colorectal obstructions. We consider self-expanding and balloon-expanding stents made of two different materials such as stainless steel and shape memory NiTi alloy. The mechanical parameters are expansion rate, shortening, radial compression resistance, longitudinal and perimetral adaptability, and buckling resistance.

Design, manufacture and evaluation of a NiTi stent for colon obstruction.

We have designed, manufactured and evaluated a prototype of a new stent based on the superelasticity of the NiTi alloy for colon obstruction, which is the first clinical manifestation of colorectal cancer in up to 29% of cases. The stent is auto-expandable diamond cell type, manufactured from a NiTi tube with 4.5 mm in diameter, in which longitudinal grooves were performed by cutting laser technique.