Effects of laser wavelength and pulse energy on the evaporation behavior of TiN coatings in atom probe tomography: A multi-instrument study.

The impact of the laser wavelength on accuracy in elemental composition analysis in atom probe tomography (APT) was investigated. Three different commercial atom probe systems - LEAP 3000X HR, LEAP 5000 XR, and LEAP 6000 XR - were systematically compared for a TiN model coating studying the effect of shorter laser wavelengths, especially in the deep ultraviolet (DUV) range, on the evaporation behavior. The findings demonstrate that the use of shorter wavelengths enhances the accuracy in elemental composition, while maintaining similar electric field strengths.

Wafer-Scale AgS-Based Memristive Crossbar Arrays with Ultra-Low Switching-Energies Reaching Biological Synapses.

Memristive crossbar arrays (MCAs) offer parallel data storage and processing for energy-efficient neuromorphic computing. However, most wafer-scale MCAs that are compatible with complementary metal-oxide-semiconductor (CMOS) technology still suffer from substantially larger energy consumption than biological synapses, due to the slow kinetics of forming conductive paths inside the memristive units. Here we report wafer-scale AgS-based MCAs realized using CMOS-compatible processes at temperatures below 160 °C.

Residual Ferromagnetic Regions Affecting the First-Order Phase Transition in Off-Stoichiometric Fe-Rh.

Among the magnetocaloric materials featuring first-order phase transitions (FOPT), FeRh is considered as a reference system to study the FOPT because it is a "simple" binary system with a CsCl structure exhibiting a large adiabatic temperature change. Recently, ab initio theory predicted that changes in the Fe/Rh stoichiometry in the vicinity of equiatomic composition strongly influence the FOPT characteristics. However, this theoretical prediction was not clearly verified experimentally.

Evaluating Nondestructive Quantification of Composition Gradients in Metal-Organic Frameworks by MeV Ion Microbeam Analysis.

We evaluate a method to quantify composition depth gradients in intact metal-organic framework (MOF) single crystals and thereby derive diffusion coefficients of postsynthetically incorporated active sites by nondestructive ion-beam microanalysis. Zr-based UiO-67-bpy (bpy = 2,2'-bipyridine-5,5'-dicarboxylic acid) MOFs were synthesized on Si substrates and then metalated postsynthetically with NiCl for 2-48 h, resulting in different Ni depth distributions. Simultaneous micro-Rutherford backscattering spectrometry (μ-RBS) and micro-particle induced X-ray emission (μ-PIXE) analysis were used for the spatially resolved chemical analysis of the MOF single crystals.

Optimizing post-synthetic metal incorporation in mixed-linker MOFs: insights from metalation studies on bipyridine-containing UiO-67 single crystals.

The postsynthetic metalation (PSM) of metal-organic frameworks (MOFs) with intrinsic metal binding sites is an intriguing strategy to introduce catalytic function into MOFs. The spatial distribution of the catalytic sites within the MOF crystal will affect the efficiency of the material, but the factors that govern depth distribution of the introduced metal sites are often not well understood. Herein, we employ Rutherford backscattering spectrometry (RBS) to investigate the metal distribution in a series of post-synthetically metalated mixed linker bpdc/BPY UiO-67 (UiO = Universitet i Oslo, bpdc = biphenyl-dicarboxylate, BPY = 2,2'-bipyridine-5,5'-dicarboxylate) single crystals as a function of linker ratio and metalation time.

A new setup for optical measurements under controlled environment.

We present a new analytical instrument for studying the optical properties of materials in different gaseous environments at room and controlled elevated temperatures. The system consists of a vacuum chamber, which is equipped with temperature and pressure controllers, a heating band, and a residual gas analyzer and is connected to a gas feeding line via a leak valve. Two transparent view ports located around a sample holder allow for optical transmission and pump-probe spectroscopy using an external optical setup.

Biased quartz crystal microbalance method for studies of chemical vapor deposition surface chemistry induced by plasma electrons.

A recently presented chemical vapor deposition (CVD) method involves using plasma electrons as reducing agents for deposition of metals. The plasma electrons are attracted to the substrate surface by a positive substrate bias. Here, we present how a standard quartz crystal microbalance (QCM) system can be modified to allow applying a DC bias to the QCM sensor to attract plasma electrons to it and thereby also enable in situ growth monitoring during the electron-assisted CVD method.

Effect of Growth Temperature and Atmosphere Exposure Time on Impurity Incorporation in Sputtered Mg, Al, and Ca Thin Films.

Impurities can be incorporated during thin film deposition, but also can originate from atmosphere exposure. As impurities can strongly affect the composition-structure-property relations in magnetron sputter deposited thin films, it is important to distinguish between both incorporation channels. Therefore, the impurity incorporation by atmosphere exposure into sputtered Mg, Al, and Ca thin films is systematically studied by a variation of the deposition temperatures and atmosphere exposure times.

Decomposition of CrN induced by laser-assisted atom probe tomography.

It is known that measurement parameters can significantly influence the elemental composition determined by atom probe tomography (APT). Especially results obtained by laser-assisted APT show a strong effect of the laser pulse energy on the apparent elemental composition. Within this study laser-assisted APT experiments were performed on CrN and thermally more stable (CrAl)N, comparing two different base temperatures (i.

High Performance Full-Inorganic Flexible Memristor with Combined Resistance-Switching.

Flexible memristors hold great promise for flexible electronics applications but are still lacking of good electrical performance together with mechanical flexibility. Herein, we demonstrate a full-inorganic nanoscale flexible memristor by using free-standing ductile α-AgS films as both a flexible substrate and a functional electrolyte. The device accesses dense multiple-level nonvolatile states with a record high 10 ON/OFF ratio.

Evidence for postnatal neurogenesis in the human amygdala.

The human amygdala is involved in processing of memory, decision-making, and emotional responses. Previous studies suggested that the amygdala may represent a neurogenic niche in mammals. By combining two distinct methodological approaches, lipofuscin quantification and C-based retrospective birth dating of neurons, along with mathematical modelling, we here explored whether postnatal neurogenesis exists in the human amygdala.

Ag Surface and Bulk Segregations in Sputtered ZrCuAlNi Metallic Glass Thin Films.

We report on the formation of Ag-containing ZrCuAlNi thin film metallic glass (nano)composites by a hybrid direct-current magnetron sputtering and high-power pulsed magnetron sputtering process. The effects of Ag content, substrate temperature and substrate bias potential on the phase formation and morphology of the nanocomposites were investigated. While applying a substrate bias potential did not strongly affect the morphological evolution of the films, the Ag content dictated the size and distribution of Ag surface segregations.

Direct Transition from Ultrathin Orthorhombic Dinickel Silicides to Epitaxial Nickel Disilicide Revealed by In Situ Synthesis and Analysis.

Understanding phase transitions of ultrathin metal silicides is crucial for the development of nanoscale silicon devices. Here, the phase transition of ultrathin (3.6 nm) Ni silicides on Si(100) substrates is investigated using an in situ synthesis and characterization approach, supplemented with ex situ transmission electron microscopy and nano-beam electron diffraction.

Self-Limited Formation of Bowl-Shaped Nanopores for Directional DNA Translocation.

Solid-state nanopores of on-demand dimensions and shape can facilitate desired sensor functions. However, reproducible fabrication of arrayed nanopores of predefined dimensions remains challenging despite numerous techniques explored. Here, bowl-shaped nanopores combining properties of ultrathin membrane and tapering geometry are manufactured using a self-limiting process developed on the basis of standard silicon technology.

Toxicity of stainless and mild steel particles generated from gas-metal arc welding in primary human small airway epithelial cells.

Welding fumes induce lung toxicity and are carcinogenic to humans but the molecular mechanisms have yet to be clarified. The aim of this study was to evaluate the toxicity of stainless and mild steel particles generated via gas-metal arc welding using primary human small airway epithelial cells (hSAEC) and ToxTracker reporter murine stem cells, which track activation of six cancer-related pathways. Metal content (Fe, Mn, Ni, Cr) of the particles was relatively homogenous across particle size.

Elemental Depth Profiling of Intact Metal-Organic Framework Single Crystals by Scanning Nuclear Microprobe.

The growing field of MOF-catalyst composites often relies on postsynthetic modifications for the installation of active sites. In the resulting MOFs, the spatial distribution of the inserted catalysts has far-reaching ramifications for the performance of the system and thus needs to be precisely determined. Herein, we report the application of a scanning nuclear microprobe for accurate and nondestructive depth profiling of individual UiO-66 and UiO-67 (UiO = Universitetet i Oslo) single crystals.

Direct MoB MBene domain formation in magnetron sputtered MoAlB thin films.

Two-dimensional (2D) inorganic transition metal boride nanosheets are emerging as promising post-graphene materials in energy research due to their unique properties. State-of-the-art processing strategies are based on chemical etching of bulk material synthesized solid-state reaction at temperatures above 1000 °C. Here, we report the direct formation of MoB MBene domains in a MoAlB thin film by Al deintercalation from MoAlB in the vicinity of AlO regions.

Interstitial Hydrogen in Fe/V Superstructures: Lattice Site Location and Thermal Vibration.

We report real space location of hydrogen in single crystalline Fe/V superstructures. Anisotropic strain is quantified versus hydrogen concentration by using the yield of backscattered primary 2 MeV ^{4}He ions for incidence in different crystallographic directions. From a comparison of ion channeling in combination with ^{1}H(^{15}N,αγ)^{12}C nuclear reaction analysis and Monte Carlo simulations we show that hydrogen is located in octahedral z sites and quantify its vibrational amplitude of 0.

Mn-Rich MnSb Te : A Topological Insulator with Magnetic Gap Closing at High Curie Temperatures of 45-50 K.

Ferromagnetic topological insulators exhibit the quantum anomalous Hall effect, which is potentially useful for high-precision metrology, edge channel spintronics, and topological qubits.  The stable 2+ state of Mn enables intrinsic magnetic topological insulators. MnBi Te is, however, antiferromagnetic with 25 K Néel temperature and is strongly n-doped.

Opportunities of combinatorial thin film materials design for the sustainable development of magnesium-based alloys.

Magnesium-based lightweight structural materials exhibit potential for energy savings. However, the state-of-the-art quest for novel compositions with improved properties through conventional bulk metallurgy is time, energy, and material intensive. Here, the opportunities provided by combinatorial thin film materials design for the sustainable development of magnesium alloys are evaluated.

P-type cobaltite oxide spinels enable efficient electrocatalytic oxygen evolution reaction.

Currently, energy-efficient electrocatalytic oxygen evolution from water involves the use of noble metal oxides. Here, we show that highly p-conducting zinc cobaltite spinel ZnCoO offers an enhanced electrocatalytic activity for oxygen evolution. We refer to previous studies on sputtered Zn-Co spinels with optimized conductivity for implementation as (p-type) transparent conducting oxides.