An anthropocene-framed transdisciplinary dialog at the chemistry-energy nexus.

At the energy-chemistry nexus, key molecules include carbon dioxide (CO), hydrogen (H), methane (CH), and ammonia (NH). The position of these four molecules and that of the more general family of synthetic macromolecular polymer blends (found in plastics) were cross-analyzed with the planetary boundary framework, and as part of five scientific policy roadmaps for the energy transition. According to the scenarios considered, the use of some of these molecular substances will be drastically modified in the coming years.

A Molecular Rheology Dynamics Study on 3D Printing of Liquid Crystal Elastomers.

This work presents a rheological study of a biocompatible and biodegradable liquid crystal elastomer (LCE) ink for three dimensional (3D) printing. These materials have shown that their structural variations have an effect on morphology, mechanical properties, alignment, and their impact on cell response. Within the last decade LCEs are extensively studied as potential printing materials for soft robotics applications, due to the actuation properties that are produced when liquid crystal (LC) moieties are induced through external stimuli.

Genome sequence of PSonyx, a singleton bacteriophage infecting .

PSonyx is a newly isolated phage that infects . This siphovirus was isolated from a French pond in the south of Paris by students from Paris-Saclay University. Its 80,277-bp singleton genome carries 136 protein-coding genes and 5 tRNAs.

Controlling the Structure and Morphology of Organic Nanofilaments Using External Stimuli.

In our continuing pursuit to generate, understand, and control the morphology of organic nanofilaments formed by molecules with a bent molecular shape, we here report on two bent-core molecules specifically designed to permit a phase or morphology change upon exposure to an applied electric field or irradiation with UV light. To trigger a response to an applied electric field, conformationally rigid chiral (,)-2,3-difluorooctyloxy side chains were introduced, and to cause a response to UV light, an azobenzene core was incorporated into one of the arms of the rigid bent core. The phase behavior as well as structure and morphology of the formed phases and nanofilaments were analyzed using differential scanning calorimetry, cross-polarized optical microscopy, circular dichroism spectropolarimetry, scanning and transmission electron microscopy, UV-vis spectrophotometry, as well as X-ray diffraction experiments.

Physical Models from Physical Templates Using Biocompatible Liquid Crystal Elastomers as Morphologically Programmable Inks For 3D Printing.

Advanced manufacturing has received considerable attention as a tool for the fabrication of cell scaffolds however, finding ideal biocompatible and biodegradable materials that fit the correct parameters for 3D printing and guide cells to align remain a challenge. Herein, a photocrosslinkable smectic-A (Sm-A) liquid crystal elastomer (LCE) designed for 3D printing is presented, that promotes cell proliferation but most importantly induces cell anisotropy. The LCE-based bio-ink allows the 3D duplication of a highly complex brain structure generated from an animal model.

Highly Tunable Circularly Polarized Emission of an Aggregation-Induced Emission Dye Using Helical Nano- and Microfilaments as Supramolecular Chiral Templates.

Aggregation-induced emission (AIE)-based circularly polarized luminescence (CPL) has been recognized as a promising pathway for developing chiroptical materials with high luminescence dissymmetry factors (||). Here, we propose a method for the construction of a thermally tunable CPL-active system based on a supramolecular self-assembly approach that utilizes helical nano- or microfilament templates in conjunction with an AIE dye. The CPL properties of the ensuing ensembles are predominantly determined by the intrinsic geometric differences among the various filament templates such as their overall dimensions (width, height, and helical pitch) and the area fraction of the exposed aromatic segments or sublayers.

Nanoconfined Crystallization in Poly(lactic acid) (PLA) and Poly(ethylene terephthalate) (PET) Induced by Various Forms of Premelt-Deformation.

The processing-structure-property relationship using poly(lactic acid) (PLA) and poly(ethylene terephthalate) (PET) is explored. Specifically, both pre-extension and preshear of amorphous PLA and PET above their glass transition temperatures T , carried out in the affine deformation limit, can induce a specific type of cold crystallization during annealing, i.e.

Macromolecular Engineering and Additive Manufacturing of Polyisobutylene-Based Thermoplastic Elastomers. II. The Poly(styrene-b-isobutylene-b-styrene)/Poly(phenylene oxide) System.

This series of publications describes research rendering soft polyisobutylene (PIB)-based thermoplastic elastomers 3D printable by blending with rigid chemically compatible thermoplastics. The molecular structure, morphology, physical properties, and 3D printability of such blends have been systematically investigated. The authors' first report was concerned with the rendering of soft poly(styrene-b-isobutylene-b-styrene) (SIBS) 3D printable by blending with rigid polystyrene (PS).

Splicing efficiency of minor introns in a mouse model of SMA predominantly depends on their branchpoint sequence and can involve the contribution of major spliceosome components.

Spinal muscular atrophy (SMA) is a devastating neurodegenerative disease caused by reduced amounts of the ubiquitously expressed Survival of Motor Neuron (SMN) protein. In agreement with its crucial role in the biogenesis of spliceosomal snRNPs, SMN-deficiency is correlated to numerous splicing alterations in patient cells and various tissues of SMA mouse models. Among the snRNPs whose assembly is impacted by SMN-deficiency, those involved in the minor spliceosome are particularly affected.

Molecular Conformation of Bent-Core Molecules Affected by Chiral Side Chains Dictates Polymorphism and Chirality in Organic Nano- and Microfilaments.

The coupling between molecular conformation and chirality is a cornerstone in the construction of supramolecular helical structures of small molecules across various length scales. Inspired by biological systems, conformational preselection and control in artificial helical molecules, polymers, and aggregates has guided various applications in optics, photonics, and chiral sorting among others, which are frequently based on an inherent chirality amplification through processes such as templating and self-assembly. The so-called B4 nano- or microfilament phase formed by some bent-shaped molecules is an exemplary case for such chirality amplification across length scales, best illustrated by the formation of distinct nano- or microscopic chiral morphologies controlled by molecular conformation.

MOF water harvesters.

The advancement of additional methods for freshwater generation is imperative to effectively address the global water shortage crisis. In this regard, extraction of the ubiquitous atmospheric moisture is a powerful strategy allowing for decentralized access to potable water. The energy requirements as well as the temporal and spatial restrictions of this approach can be substantially reduced if an appropriate sorbent is integrated in the atmospheric water generator.

3D Porous Liquid Crystal Elastomer Foams Supporting Long-term Neuronal Cultures.

3D liquid crystal elastomer (3D-LCE) foams are used to support long-term neuronal cultures for over 60 days. Sequential imaging shows that cell density remains relatively constant throughout the culture period while the number of cells per observational area increases. In a subset of samples, retinoic acid is used to stimulate extensive neuritic outgrowth and maturation of proliferated neurons within the LCEs, inducing a threefold increase in length with cells displaying morphologies indicative of mature neurons.

Missing Link between Helical Nano- and Microfilaments in B4 Phase Bent-Core Liquid Crystals, and Deciphering which Chiral Center Controls the Filament Handedness.

The range of possible morphologies for bent-core B4 phase liquid crystals has recently expanded from helical nanofilaments (HNFs) and modulated HNFs to dual modulated HNFs, helical microfilaments, and heliconical-layered nanocylinders. These new morphologies are observed when one or both aliphatic side chains contain a chiral center. Here, the following questions are addressed: which of these two chiral centers controls the handedness (helicity) and which morphology of the nanofilaments is formed by bent-core liquid crystals with tris-biphenyl diester core flanked by two chiral 2-octyloxy side chains? The combined results reveal that the longer arm of these nonsymmetric bent-core liquid crystals controls the handedness of the resulting dual modulated HNFs.

Rapid Cycling and Exceptional Yield in a Metal-Organic Framework Water Harvester.

Sorbent-assisted water harvesting from air represents an attractive way to address water scarcity in arid climates. Hitherto, sorbents developed for this technology have exclusively been designed to perform one water harvesting cycle (WHC) per day, but the productivities attained with this approach cannot reasonably meet the rising demand for drinking water. This work shows that a microporous aluminum-based metal-organic framework, MOF-303, can perform an adsorption-desorption cycle within minutes under a mild temperature swing, which opens the way for high-productivity water harvesting through rapid, continuous WHCs.

Three-Dimensional Phthalocyanine Metal-Catecholates for High Electrochemical Carbon Dioxide Reduction.

The synthesis of a new anionic 3D metal-catecholate framework, termed MOF-1992, is achieved by linking tetratopic cobalt phthalocyanin-2,3,9,10,16,17,23,24-octaol linkers with Fe(-CO-)(OH) trimers into an extended framework of topology. MOF-1992 exhibits sterically accessible Co active sites together with charge transfer properties. Cathodes based on MOF-1992 and carbon black (CB) display a high coverage of electroactive sites (270 nmol cm) and a high current density (-16.

Casting Nanoporous Platinum in Metal-Organic Frameworks.

Nanocasting based on porous templates is a powerful strategy in accessing materials and structures that are difficult to form by bottom-up syntheses in a controlled fashion. A facile synthetic strategy for casting ordered, nanoporous platinum (NP-Pt) networks with a high degree of control by using metal-organic frameworks (MOFs) as templates is reported here. The Pt precursor is first infiltrated into zirconium-based MOFs and subsequently transformed to 3D metallic networks via a chemical reduction process.

Liquid Crystal Elastomers-A Path to Biocompatible and Biodegradable 3D-LCE Scaffolds for Tissue Regeneration.

The development of appropriate materials that can make breakthroughs in tissue engineering has long been pursued by the scientific community. Several types of material have been long tested and re-designed for this purpose. At the same time, liquid crystals (LCs) have captivated the scientific community since their discovery in 1888 and soon after were thought to be, in combination with polymers, artificial muscles.

Liquid crystal elastomer foams with elastic properties specifically engineered as biodegradable brain tissue scaffolds.

Tissue regeneration requires 3-dimensional (3D) smart materials as scaffolds to promote transport of nutrients. To mimic mechanical properties of extracellular matrices, biocompatible polymers have been widely studied and a diverse range of 3D scaffolds have been produced. We propose the use of responsive polymeric materials to create dynamic substrates for cell culture, which goes beyond designing only a physical static 3D scaffold.

[Forehead rejuvenation].

The goal of this article is to provide a systemic approach to forehead rejuvenation. Fillers, botulinic toxin injections, transpalpebral, endoscopic or bicoronal brow lift must be usual techniques for every plastic surgeon in overall facial rejuvenation. Achieving a long lasting and aesthetically pleasing forehead is possible only with surgical techniques when aging is obvious.

Synthesis of Biocompatible Liquid Crystal Elastomer Foams as Cell Scaffolds for 3D Spatial Cell Cultures.

Here, we present a step-by-step preparation of a 3D, biodegradable, foam-like cell scaffold. These scaffolds were prepared by cross-linking star block co-polymers featuring cholesterol units as side-chain pendant groups, resulting in smectic-A (SmA) liquid crystal elastomers (LCEs). Foam-like scaffolds, prepared using metal templates, feature interconnected microchannels, making them suitable as 3D cell culture scaffolds.