A low-cost, antimicrobial aloe-alginate hydrogel film containing Australian First Nations remedy 'lemon myrtle oil' () - Potential for incorporation into wound dressings.

Chronic wounds pose a global public health challenge, particularly in remote settings where access to specialised wound care and dressings can be limited and cost-prohibitive. First Nations communities in Australia are at a significantly higher risk for developing chronic wounds and this risk further increases for people living in remote regions. There is an urgent need to develop inexpensive but effective wound dressings to improve wound outcomes.

Effect of Polyvinylpyrrolidone on the Structure Development, Electrical, Thermal, and Wetting Properties of Polyvinylidene Fluoride-Expanded Graphite Nanocomposites.

Polyvinylidene fluoride (PVDF)-expanded graphite (ExGr) nanocomposites have been prepared by solution blending and melt processing methods. In the presence of polyvinylpyrrolidone (PVP), enhanced dispersion of graphite nanosheets (GNSs) in the PVDF matrix, as suggested by field emission scanning electron microscopy analysis, results in very low electrical percolation threshold (0.3 wt % ExGr).

Molecularly Engineered Lignin-Derived Additives Enable Fire-Retardant, UV-Shielding, and Mechanically Strong Polylactide Biocomposites.

From a perspective of sustainable development and practical applications, there has been a great need for the design of advanced polylactide (PLA) biocomposites that are flame-retardant, ultraviolet (UV)-resistant, and mechanically strong by using biomass-derived additives. Unfortunately, the achievement of a desirable performance portfolio remains unsatisfactory because of improper design strategies. Herein, we report the design of lignin-derived multifunctional bioadditives (TP-g-lignin) with tunable chemical compositions through graft polymerization of a phosphorus-/nitrogen-containing vinyl monomer (TP).

Influence of Different Nanocellulose Additives on Processing and Performance of PAN-Based Carbon Fibers.

Nanocellulose, as a biobased versatile nanomaterial that can be derived with tailorable surface functionalities, dimensions, and morphologies, has considerable implications for modifying the rheology, mechanical reinforcement, and influencing the carbonization efficiency in the production of polyacrylonitrile (PAN)-based carbon fibers. Herein, we report the influence of three different nanocellulose types, varying in the derivatization method, source, and aspect ratio, on the mechanical properties and thermal transformations of solution-spun PAN/nanocellulose nanocomposite fibers into carbon fibers. The incorporation of 0.

Facile Tuning of the Surface Energy of Cellulose Nanofibers for Nanocomposite Reinforcement.

The isolation of nanocellulose from lignocellulosic biomass, with desirable surface chemistry and morphology, has gained extensive scientific attention for various applications including polymer nanocomposite reinforcement. Additionally, environmental and economic concerns have driven researchers to explore viable alternatives to current isolation approaches, employing chemicals with reduced environmental impact. To address these issues, in this study, we have tuned the amphiphilic behavior of cellulose nanofibers (CNFs) by employing controlled alkali treatment, instead of in combination with expensive, environmentally unsustainable conventional approaches.

Atomic Layer Deposition of Metal Oxide on Nanocellulose for Enabling Microscopic Characterization of Polymer Nanocomposites.

Analysis of cellulose nanocrystals (CNCs) at low volume fractions in polymer nanocomposites through conventional electron microscopy still remains a challenge due to insufficient contrast between CNCs and organic polymer matrices. Herein, a methodology for enhancing the contrast of CNC, through atomic layer deposition (ALD) of alumina (Al O ) on CNCs is demonstrated. The metal oxide coated CNC allows clear visualization by transmission electron microscopy, when they are dispersed in water and polyol.

Reinforcement of natural rubber latex using lignocellulosic nanofibers isolated from spinifex grass.

Reinforcement of natural rubber (NR) using nanofillers often results in an enhancement of the tensile strength, but at the expense of elongation at break and toughness. In this study, with the objective of strengthening NR without compromising its compliance, we investigate the reinforcement efficiency of a series of cellulose nanofibers (CNF) with variations in residual hemicellulose, lignin and therefore surface chemistry. Different types of high aspect ratio CNF isolated from Triodia pungens (T.

Dip-and-Drag Lateral Force Spectroscopy for Measuring Adhesive Forces between Nanofibers.

Adhesive interactions between nanofibers strongly influence the mechanical behavior of soft materials composed of fibrous networks. We use atomic force microscopy in lateral force mode to drag a cantilever tip through fibrous networks, and use the measured lateral force response to determine the adhesive forces between fibers of the order of 100 nm diameter. The peaks in lateral force curves are directly related to the detachment energy between two fibers; the data is analyzed using the Jarzynski equality to yield the average adhesion energy of the weakest links.

Water-responsive mechanically adaptive nanocomposites based on styrene-butadiene rubber and cellulose nanocrystals--processing matters.

Biomimetic, stimuli-responsive polymer nanocomposites based on a hydrophobic styrene-butadiene rubber (SBR) matrix and rigid, rod-like cellulose nanocrystals (CNCs) isolated from cotton were prepared by three different approaches, and their properties were studied and related to the composition, processing history, and exposure to water as a stimulus. The first processing approach involved mixing an aqueous SBR latex with aqueous CNC dispersions, and films were subsequently formed by solution-casting. The second method utilized the first protocol, but films were additionally compression-molded.