3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques.

In recent years, 3D printing has emerged as a promising technology in energy storage, particularly for the fabrication of Li-ion battery electrodes. This innovative manufacturing method offers significant material composition and electrode structure flexibility, enabling more complex and efficient designs. While traditional Li-ion battery fabrication methods are well-established, 3D printing opens up new possibilities for enhancing battery performance by allowing for tailored geometries, efficient material usage, and integrating multifunctional components.

Investigation of the 4D Multi-Material 316L/FeNi36 Obtained by Selective Laser Melting.

Multi-material can have functional properties, which are not typical for the materials of which they are composed (for instance, shape-changing effect). This can be used in robotics, micromachines, aerospace, and other fields. In this work, the 316L/FeNi36 multi-material produced by selective laser melting was investigated.

Binder Jetting Additive Manufacturing of Inconel 718/TiC Metal Matrix Composites: Influence of TiC Content on Processing, Microstructure, Mechanical and Tribological Properties.

This paper investigated the influence of titanium carbide (TiC) content on the processing, microstructure, mechanical and tribological properties of Inconel 718/TiC composites produced by binder jetting additive manufacturing. It was found that increasing the amount of TiC required an increase of the drying intensity during printing due to a decrease in the thermal conductivity of the powder mixture. The sintering process also depended on the TiC content.

Structure and luminescence properties of EuF and SrF:Eu nanoparticles after microwave plasma annealing in "methane-hydrogen".

Recently, progress has been made in fabricating diamond-based scintillators with integrated rare-earth luminescent particles. These luminescent particles are integrated into the bulk of diamond during their synthesis by chemical vapor deposition (CVD). However, the growth conditions include a chemically aggressive plasma environment and elevated temperatures, which results in the partial degradation of particles and a decrease in the intensity of their luminescence.

[Wiedemann-Rautenstrauch syndrome. The first description of a clinical case in the Russian Federation].

Wiedemann-Rautenstrauch syndrome (neonatal progeroid syndrome) is an ultra-orphan disease from the group of premature aging syndromes with an autosomal recessive type of inheritance associated with mutations in the POLR3A, POLR3B, and POLR3GL genes encoding RNA polymerase III. The incidence of the disease is currently unknown. We present the first clinical description in Russian Federation of a patient 7 years 6 months old with Wiedemann-Rautenstrauch syndrome (compound heterozygous mutations in POLR3A gene) with progeroid features, adentia, growth retardation (height SDS -3,41, height velocity SDS -2,47), underweight (BMI SDS -6,20), and generalized lipodystrophy.

Comparative Study of Microstructure and Phase Composition of Amorphous-Nanocrystalline Fe-Based Composite Material Produced by Laser Powder Bed Fusion in Argon and Helium Atmosphere.

Laser powder bed fusion (LPBF) is a prospective and promising technique of additive manufacturing of which there is a growing interest for the development and production of Fe-based bulk metallic glasses and amorphous-nanocrystalline composites. Many factors affect the quality and properties of the resulting material, and these factors are being actively investigated by many researchers, however, the factor of the inert gas atmosphere used in the process remains virtually unexplored for Fe-based metallic glasses and composites at this time. Here, we present the results of producing amorphous-nanocrystalline composites from amorphous Fe-based powder via LPBF using argon and helium atmospheres.

Development of TiO/ZrO Multi-Material Obtained from Ceramic Pastes for Material Extrusion.

The application of additive manufacturing method such as material extrusion (MEX) allows the successful fabrication of ceramic products, including multi-ceramic products. Promising materials in this research area are TiO and ZrO ceramics, which can be used in electrical and electronic engineering. The aim of this work is to investigate the possibility of fabricating TiO/ZrO multi-materials from ceramic pastes that can be used in the MEX.

3D Printing Technologies for Fabrication of Magnetic Materials Based on Metal-Polymer Composites: A Review.

Additive manufacturing is a very rapidly developing industrial field. It opens many possibilities for the fast fabrication of complex-shaped products and devices, including functional materials and smart structures. This paper presents an overview of polymer 3D printing technologies currently used to produce magnetic materials and devices based on them.

Structure and Properties of High-Entropy Boride Ceramics Synthesized by Mechanical Alloying and Spark Plasma Sintering.

This manuscript shows the study of the structure, mechanical, and chemical properties of high-entropy borides MeB (Me = Ti, Ta, Nb, Hf, Zr). High-entropy borides were synthesized by mechanical alloying and spark plasma sintering. A chemically homogeneous powder with a low iron content (0.

Crystallization of Copper Films on Sapphire Substrate for Large-Area Single-Crystal Graphene Growth.

Chemical vapor deposition synthesis of graphene on polycrystalline copper substrates from methane is a promising technique for industrial production and application. However, the quality of grown graphene can be improved by using single-crystal copper (111). In this paper, we propose to synthesize graphene on epitaxial single-crystal Cu film deposited and recrystallized on a basal-plane sapphire substrate.

Microporous poly- and monocrystalline diamond films produced from chemical vapor deposited diamond-germanium composites.

We report on a novel method for porous diamond fabrication, which is based on the synthesis of diamond-germanium composite films followed by etching of the Ge component. The composites were grown by microwave plasma assisted CVD in CH-H-GeH mixtures on (100) silicon, and microcrystalline- and single-crystal diamond substrates. The structure and the phase composition of the films before and after etching were analyzed with scanning electron microscopy and Raman spectroscopy.

Organic Anode Materials for Lithium-Ion Batteries: Recent Progress and Challenges.

In the search for novel anode materials for lithium-ion batteries (LIBs), organic electrode materials have recently attracted substantial attention and seem to be the next preferred candidates for use as high-performance anode materials in rechargeable LIBs due to their low cost, high theoretical capacity, structural diversity, environmental friendliness, and facile synthesis. Up to now, the electrochemical properties of numerous organic compounds with different functional groups (carbonyl, azo, sulfur, imine, etc.) have been thoroughly explored as anode materials for LIBs, dividing organic anode materials into four main classes: organic carbonyl compounds, covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and organic compounds with nitrogen-containing groups.

Interface Characterization of Bimetallic Ti-6Al-4V/Ti2AlNb Structures Prepared by Selective Laser Melting.

Additive Manufacturing (AM) of multimaterial components is a promising way of fabricating parts with improved functional properties. It allows for the combination of materials with different properties into a single component. The TiAlNb-based intermetallic alloy provides high temperature strength, while the Ti-6Al-4V (Ti64) alloy has good fracture toughness, ductility, and a relatively low cost.

Synthesis of Spherical Powder of Lead-Free BCZT Piezoceramics and Binder Jetting Additive Manufacturing of Triply Periodic Minimum Surface Lattice Structures.

The article presents the results of the synthesis of lead-free piezoceramic materials (BaCa)(TiZr)O (BCZT system) in spherical powder form and their subsequent application in the binder jetting additive manufacturing process. Green models were manufactured using this powder material with binder jetting, different sintering modes were investigated, and the functional piezoelectric properties were measured. Lattice structures with triply periodic minimum surface topologies, such as Gyroid and Schwarz, were designed and manufactured.

Modification of Inconel 718 Properties by In Situ Y Addition in Selective Laser Melting.

The paper presents the results of a study of the possibility of Inconel 718 alloy properties modifying by adding Yttrium in situ in the process of selective laser melting. The single and double laser processing of each layer was used. Yttrium was introduced into the alloy in an amount of 0.

Biogenic Synthesis, Characterization, and Photocatalytic Evaluation of Pristine and Graphene-Loaded ZnMgO Nanocomposites for Organic Dyes Removal.

Algal biomass synthesised nanocomposites have a higher surface area and reusability advantages. This study aimed to synthesise and characterise ZnMgO and silica-supported graphene with ZnMgO (G-ZnMgO) nanocomposites from and evaluate their potential in the application of photocatalysis to remove Rhodamine-B (RhB) and methylene blue (MB) dyes from their aqueous medium by maximising the percentage removal using response surface methodology (RSM) modelling. Nanocomposites were synthesised and characterised by biogenic and instrumental (Powder X-ray diffraction (P-XRD), electron microscopic analysis (SEM and TEM), Fourier transform infrared spectroscopy (FTIR), Energy dispersive analysis of X-rays (EDAX).

A Review on Additive Manufacturing of Functional Gradient Piezoceramic.

Functionally graded piezoceramics are a new generation of engineering materials whose final properties are determined by a chemical composition gradient (volume distribution), material microstructure, or design characteristics. This review analyzes possible ways to create a functionally graded piezoceramic material (gradient chemical composition, gradient porosity-controlled and disordered porosity) by additive manufacturing methods, to control such materials' functional characteristics. An analysis of the creation of gradient piezoceramics using binder jetting technology is presented in more detail.

Structure, Mechanical and Magnetic Properties of Selective Laser Melted Fe-Si-B Alloy.

Original 1CP powder was studied and it was founded that powder material partially consists of the amorphous phase, in which crystallization begins at 450 °C and ends at 575 °C. Selective laser melting parameters were investigated through the track study, and more suitable ones were found: laser power = 90, 120 W; scanning speed = 1200 mm/s. Crack-free columnar elements were obtained.

Structural, Electrical, and Mechanical Properties Investigation of Open-Cell Aluminum Foams Obtained by Spark Plasma Sintering and Replication on Polyurethane Template.

The present paper illustrates a comparison of open-cell aluminum foams. The foams were fabricated by two different methods: spark plasma sintering and replication on a polyurethane template. The influence of pressure, temperature, and diameter of space holding material on foam obtained by the spark plasma sintering method was investigated.

Superionic Solid Electrolyte LiLaZrO Synthesis and Thermodynamics for Application in All-Solid-State Lithium-Ion Batteries.

Solid-state reaction was used for LiLaZrO material synthesis from LiCO, LaO and ZrO powders. Phase investigation of LiLaZrO was carried out by x-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS) methods. The thermodynamic characteristics were investigated by calorimetry measurements.

Surface Modification of Additively Manufactured Nitinol by Wet Chemical Etching.

Three-dimensional printed nitinol (NiTi) alloys have broad prospects for application in medicine due to their unique mechanical properties (shape memory effect and superplasticity) and the possibilities of additive technologies. However, in addition to mechanical properties, specific physicochemical characteristics of the surface are necessary for successful medical applications. In this work, a comparative study of additively manufactured (AM) NiTi samples etched in HSO/HO, HCl/HSO and NHOH/HO mixtures was performed.

Synthesis Method and Thermodynamic Characteristics of Anode Material LiFeN for Application in Lithium-Ion Batteries.

LiFeN material was synthesized by the two-step solid-state method from LiN (adiabatic camera) and FeN (tube furnace) powders. Phase investigation of LiN, FeN, and LiFeN was carried out. The discharge capacity of LiFeN is 343 mAh g, which is about 44.