Current State and New Horizons in Applications of Physiologically Based Biopharmaceutics Modeling (PBBM): A Workshop Report.

This report summarizes the proceedings for Day 3 of the workshop titled "". This day focused on the current and future drug product quality applications of PBBM from the innovator and generic industries as well as the regulatory agencies perspectives. The presentations, which included several case studies, covered the applications of PBBM in generic drug product development, applications of virtual bioequivalence trials to support formulation bridging and the utility of absorption modeling in clinical pharmacology assessments.

Screening of Polymers for Oral Ritonavir Amorphous Solid Dispersions by Film Casting.

Drug-polymer interactions and miscibility promote the formation and performance of amorphous solid dispersions (ASDs) of poorly soluble drugs for improved oral bioavailability. The objective of this study was to employ drug-polymer interaction calculations and small-scale experimental characterization to screen polymers for potential ASDs of ritonavir. Seven polymers across four polymer types were screened as follows: an enteric one (EudragitS100), amphiphilic ones (HPMCAS-L, HPMCAS-H, and their 1:1 combination), hydrophilic ones (PEG-6000, PVP-VA), and a surfactant (Soluplus), including PVP-VA as a positive control, as the commercial ASD employs PVP-VA.

Biowaiver monographs for immediate-release solid oral dosage forms: Voriconazole.

According to the ICH M9 Guideline, the triazole antifungal voriconazole is a Biopharmaceutics Classification System (BCS) class II drug, being highly soluble at the highest dose strength but not at the highest single dose. Although the ICH M9 allows for consideration of BCS-based biowaivers in such cases, voriconazole does not meet the additional requirement of dose proportional pharmacokinetics (PK) over the therapeutic dose range. By contrast, if the classification were based on the FDA solubility criteria that were in place prior to ICH M9 (based on the highest dose strength), voriconazole would belong to BCS class I and thus qualify for the BCS-based biowaiver.

Evaluation and synthesis of perovskite crystals as high-Z sensors for hybrid pixel detectors.

High-energy photon imaging experiments are crucial techniques in synchrotron facilities, often employing hybrid pixel detectors for these operations. These detectors combine a photo-sensitive semiconductor component with a pixelated microelectronic Application Specific Integrated Circuit (ASIC) for signal processing and image formation. However, detecting photons above 90 keV poses significant challenges, even for heavy semiconductors, due to lower photoelectric absorption cross-section at this energy range.

Prediction of Successful Amorphous Solid Dispersion Pairs through Liquid State Nuclear Magnetic Resonance.

Amorphous solid dispersions (ASDs) function in part via a "parachute effect", i.e., polymer-enabled prolonged drug supersaturation, presumably through drug-polymer interactions in the liquid state.

Biowaiver monographs for immediate-release solid oral dosage forms: Lemborexant.

Lemborexant is a dual orexin receptor antagonist assigned to class II of the Biopharmaceutics Classification System (BCS). Thus, the ICH M9 Guideline excludes immediate-release (IR) solid oral dosage forms containing lemborexant from BCS-based biowaivers, irrespective of their in vitro dissolution behavior. By contrast, classification of lemborexant according to the refined Developability Classification System (rDCS) falls into class I, indicating few biopharmaceutics risks.

Microscope-enabled disc dissolution system: Concordance between drug and polymer dissolution from an amorphous solid dispersion disc and visual disc degradation.

A microscopic erosion time test was recently described to anticipate amorphous solid dispersion (ASD) drug load dispersibility limit, using 0.5 ml media volume. Studies here build upon this microscope-enabled method but focus on drug and polymer dissolution from an ASD disc, along with imaging.

Impact of drug incorporation into micelle on reduced griseofulvin and meloxicam permeation across a hollow fiber membrane.

A hollow fiber membrane (HFM) was previously characterized as a potential permeation component of a dissolution/permeation system. Two objectives were to assess the impact of micellization on drug permeation across HFM and identify a preferred permeation model from three models: permeation from only free drug, permeation from both free drug and micelle-bound drug, and permeation with enhancement from micelle shuttling. HFM studies were conducted under unsaturated drug conditions, using griseofulvin and the more hydrophilic drug meloxicam, with and without surfactant [sodium lauryl sulfate, polysorbate 80, and polyoxyethylene (10) lauryl ether].

PBBM Considerations for Base Models, Model Validation, and Application Steps: Workshop Summary Report.

The proceedings from the 30th August 2023 (Day 2) of the workshop "Physiologically Based Biopharmaceutics Models (PBBM) Best Practices for Drug Product Quality: Regulatory and Industry Perspectives" are provided herein. Day 2 covered PBBM case studies from six regulatory authorities which provided considerations for model verification, validation, and application based on the context of use (COU) of the model. PBBM case studies to define critical material attribute (CMA) specification settings, such as active pharmaceutical ingredient (API) particle size distributions (PSDs) were shared.

Parameterization of Physiologically Based Biopharmaceutics Models: Workshop Summary Report.

This Article shares the proceedings from the August 29th, 2023 (day 1) workshop "Physiologically Based Biopharmaceutics Modeling (PBBM) Best Practices for Drug Product Quality: Regulatory and Industry Perspectives". The focus of the day was on model parametrization; regulatory authorities from Canada, the USA, Sweden, Belgium, and Norway presented their views on PBBM case studies submitted by industry members of the IQ consortium. The presentations shared key questions raised by regulators during the mock exercise, regarding the PBBM input parameters and their justification.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Fexofenadine.

In this monograph, the potential use of methods based on the Biopharmaceutics Classification System (BCS) framework to evaluate the bioequivalence of solid immediate-release (IR) oral dosage forms containing fexofenadine hydrochloride as a substitute for a pharmacokinetic study in human volunteers is investigated. We assessed the solubility, permeability, dissolution, pharmacokinetics, pharmacodynamics, therapeutic index, bioavailability, drug-excipient interaction, and other properties using BCS recommendations from the ICH, FDA and EMA. The findings unequivocally support fexofenadine's classification to BCS Class IV as it is neither highly soluble nor highly permeable.

Beyond MABEL: An Integrative Approach to First in Human Dose Selection of Immunomodulators by the Health and Environmental Sciences Institute (HESI) Immuno-Safety Technical Committee (ITC).

Administration of a new drug candidate in a first-in-human (FIH) clinical trial is a particularly challenging phase in drug development and is especially true for immunomodulators, which are a diverse and complex class of drugs with a broad range of mechanisms of action and associated safety risks. Risk is generally greater for immunostimulators, in which safety concerns are associated with acute toxicity, compared to immunosuppressors, where the risks are related to chronic effects. Current methodologies for FIH dose selection for immunostimulators are focused primarily on identifying the minimum anticipated biological effect level (MABEL), which has often resulted in sub-therapeutic doses, leading to long and costly escalation phases.

Enteric-Coated Capsules Providing Reliable Site-Specific Drug Delivery to the Distal Ileum.

Nefecon, a targeted-release capsule formulation of budesonide approved for the reduction of proteinuria in adults with primary immunoglobulin A nephropathy, targets overproduction of galactose-deficient immunoglobulin A type 1 in the Peyer's patches at the gut mucosal level. To investigate whether the commercial formulation of Nefecon capsules reliably releases budesonide to the distal ileum, a human study was conducted with test capsules reproducing the delayed-release function of Nefecon capsules. Caffeine was included in the test capsules as a marker for capsule opening in the gut since it appears rapidly in saliva after release from orally administered dosage forms.

Relative Performance of Volume of Distribution Prediction Methods for Lipophilic Drugs with Uncertainty in LogP Value.

Purpose: The goal was to assess, for lipophilic drugs, the impact of logP on human volume of distribution at steady-state (VD) predictions, including intermediate fut and Kp values, from six methods: Oie-Tozer, Rodgers-Rowland (tissue-specific Kp and only muscle Kp), GastroPlus, Korzekwa-Nagar, and TCM-New.

Method: A sensitivity analysis with focus on logP was conducted by keeping pKa and fup constant for each of four drugs, while varying logP. VD was also calculated for the specific literature logP values.

In Vitro Lipolysis Model to Predict Food Effect of Poorly Water-Soluble Drugs Itraconazole, Rivaroxaban, and Ritonavir.

It is desirable to predict positive food effect of oral formulations due to food mediated dissolution enhancement of lipophilic drugs. The objective was to assess the ability of in vitro lipolysis to anticipate a positive food effect. Tested formulations included rivaroxaban and itraconazole, where some formulations, but not all, exhibit a positive food effect in vivo in humans.

Physiologically Based Biopharmaceutics Modeling (PBBM): Best Practices for Drug Product Quality, Regulatory and Industry Perspectives: 2023 Workshop Summary Report.

Physiologically based biopharmaceutics modeling (PBBM) is used to elevate drug product quality by providing a more accurate and holistic understanding of how drugs interact with the human body. These models are based on the integration of physiological, pharmacological, and pharmaceutical data to simulate and predict drug behavior in vivo. Effective utilization of PBBM requires a consistent approach to model development, verification, validation, and application.

Efficiency of single pharmaceutical surfactants to mimic intestinal biorelevant media solubilization and dissolution of etravirine: Comparison of intrinsic and film dissolution models.

We understand that quality control dissolution media may best anticipate in vivo product performance by mimicking in vivo media, but preferably involve at most a single pharmaceutical surfactant for routine laboratory use. The objective here was to estimate the concentrations of six pharmaceutical surfactants to mimic etravirine solubility and intrinsic dissolution rate, as well as dissolution rate from a film model, in each Fed State Simulated Intestinal Fluid Version 2 (FeSSIF-V2) and Fasted State Simulated Intestinal Fluid Version 2 (FaSSIF-V2). Solubility studies and colloid sizing measurements were conducted.

Lack of Effect of Antioxidants on Biopharmaceutics Classification System (BCS) Class III Drug Permeability.

The addition of antioxidants to pharmaceutical products is a potential approach to inhibit nitrosamine formation, particularly in solid oral dosage forms like tablets and capsules. The objective was to assess the effect of ten antioxidants on the permeability of four Biopharmaceutics Classification System (BCS) Class III drugs. Bi-directional drug permeability studies in the absence and presence of antioxidants were performed in vitro across MDCK-II monolayers.

Application of bootstrap f to dissolution data from biorelevant media and evidence of the conservative nature of bootstrap f.

f with or without bootstrapping is the most common method to compare in vitro dissolution profiles, but methods to compare dissolution profiles have become less harmonized. The objective was to compare outcomes from bootstrap f and f (i.e.

Concordance of vacuum compression molding with spray drying in screening of amorphous solid dispersions of itraconazole.

Spray drying is a well-established method for screening spray dried dispersions (SDDs) but is material consuming, and the amorphous solid dispersions (ASDs) formed have low bulk density. Vacuum Compression Molding (VCM) is a potential method to avoid these limitations. This study focuses on VCM to screen ASDs containing itraconazole and L, M, or H polymer grades of hydroxypropyl methylcellulose acetate succinate (HPMCAS) and compares their morphology, amorphous stability, and dissolution performance with spray drying.

Asian participants' experience in phase 3/3b studies of long-acting cabotegravir and rilpivirine: Efficacy, safety, pharmacokinetic, and virological outcomes through week 96.

Objectives: Cabotegravir + rilpivirine (CAB + RPV) dosed monthly or every 2 months is the first complete long-acting (LA) regimen recommended by treatment guidelines for the maintenance of HIV-1 virological suppression. This post hoc analysis summarizes outcomes for Asian participants through week 96.

Methods: Data from Asian participants naive to CAB + RPV randomized to receive dosing every 4 weeks (Q4W) or every 8 weeks (Q8W) in the FLAIR (NCT02938520) and ATLAS-2M (NCT03299049) phase 3/3b studies were pooled.