Processing of flexible plastic packaging waste into pyrolysis oil and multi-walled carbon nanotubes for electrocatalytic oxygen reduction.

Flexible plastic packaging waste causes serious environmental issues due to challenges in recycling. This study investigated the conversion of flexible plastic packaging waste with 11.8 and 27.

Environmental impact assessment of converting flexible packaging plastic waste to pyrolysis oil and multi-walled carbon nanotubes.

A solution to low recycling rates of plastic waste is the conversion into multi-walled carbon nanotubes (MWCNTs) that have high value and can create additional revenue for plant operators. The purpose of this study was to perform a life cycle assessment (LCA) of an integrated system that involves flexible packaging plastic waste (FPPW) pyrolysis, oil upgrading, and MWCNTs production. The objectives were to determine the environmental impact of MWCNTs synthesis from non-condensable pyrolysis gases, and to assess the environmental impact of MWCNTs synthesis from different plastic fractions.

High-quality fuel from food waste - investigation of a stepwise process from the perspective of technology development.

A stepwise process (SP) was developed for sustainable energy production from food waste (FW). The process comprised of hydrothermal treatment followed by oil upgrading. Synthetic food waste was primarily used as feedstock in the hydrothermal reactor under subcritical water conditions.

Determination of solubility parameters of ionic liquids and ionic liquid/solvent mixtures from intrinsic viscosity.

The total and partial solubility parameters (dispersion, polar and hydrogen-bonding solubility parameters) of ten ionic liquids were determined. Intrinsic viscosity approaches were used that encompassed a one-dimensional method (1D-Method), and two different three-dimensional methods (3D-Method1 and 3D-Method2). The effect of solvent type, the dimethylacetamide (DMA) fraction in the ionic liquid, and dissolution temperature on solubility parameters were also investigated.

Effects of solubility properties of solvents and biomass on biomass pretreatment.

Hildebrand solubility parameters of biomasses and pretreatment solvents were examined by a method of intrinsic viscosity. This is to be used as basic information in selecting a suitable solvent for biomass pretreatment processes. The effects of mixing1-ethyl-3-methylimidazolium acetate (EMIM-AC) and different solvents, lignin content in a pretreatment solvent, and biomass type on the Hildebrand solubility parameter and thermodynamic properties were carried out and calculated in this work.

Recyclability of an ionic liquid for biomass pretreatment.

This study investigated the possibility of reusing an ionic liquid for the pretreatment of biomass. The effects of lignin and water content in a pretreatment solvent on pretreatment products were examined, along with the recyclability of an ionic liquid for pretreatment. It was discovered that the presence of lignin and water within a pretreatment solvent resulted in a far less effective pretreatment process.

Influence of organic solvent on the separation of an ionic liquid from a lignin-ionic liquid mixture.

Sixteen solvents added in lignin-ionic liquid mixture provide four types of solubility characteristics. The distinct characteristics can be classified by considering solubility parameters including ET Scale, Kamlet-Taft parameters and solubility parameters. Group 1 solvent shows promising solvents for lignin-ionic liquid separation, contributing full dissolution of ionic liquid with lignin precipitation.

Improvement of biomass properties by pretreatment with ionic liquids for bioconversion process.

Cassava pulp residue and rice straw were used as a precursor for pretreatment with ionic liquids to study the effects of pretreatment conditions on product yield and properties. Cassava pulp residue is a potential biomass in the bioconversion process due to it requiring mild pretreatment conditions while providing a high sugar conversion. The maximum sugar conversion and lignin extraction are attained from pretreatment of biomasses with particle size of <38 μm and ionic liquid of 1-Ethyl-3-methylimidazolium acetate at 120°C for 24h.

Effects of gasifying conditions and bed materials on fluidized bed steam gasification of wood biomass.

The effect of steam gasification conditions on products properties was investigated in a bubbling fluidized bed reactor, using larch wood as the starting material. For bed material effect, calcined limestone and calcined waste concrete gave high content of H(2) and CO(2), while silica sand provided the high content of CO. At 650 degrees C, calcined limestone proved to be most effective for tar adsorption and showed high ability to adsorb CO(2) in bed.