Investigation of Surface Properties and Free Volumes of Chitosan-Based Buccal Mucoadhesive Drug Delivery Films Containing Ascorbic Acid.

Nowadays, the buccal administration of mucoadhesive films is very promising. Our aim was to prepare ascorbic acid-containing chitosan films to study the properties and structures important for applicability and optimize the composition. During the formulation of mucoadhesive films, chitosan as the polymer basis of the film was used.

Predicting Drug Release Rate of Implantable Matrices and Better Understanding of the Underlying Mechanisms through Experimental Design and Artificial Neural Network-Based Modelling.

There is a growing interest in implantable drug delivery systems (DDS) in pharmaceutical science. The aim of the present study is to investigate whether it is possible to customize drug release from implantable DDSs through drug-carrier interactions. Therefore, a series of chemically similar active ingredients (APIs) was mixed with different matrix-forming materials and was then compressed directly.

Effects of Sucrose Palmitate on the Physico-Chemical and Mucoadhesive Properties of Buccal Films.

In our current research, sucrose palmitate (SP) was applied as a possible permeation enhancer for buccal use. This route of administration is a novelty as there is no literature on the use of SP in buccal mucoadhesive films. Films containing SP were prepared at different temperatures, with different concentrations of SP and different lengths of hydroxypropyl methylcellulose (HPMC) chains.

Optimization of the Production Process and Product Quality of Titanate Nanotube-Drug Composites.

Recently, there has been an increasing interest in the application of nanotubular structures for drug delivery. There are several promising results with carbon nanotubes; however, in light of some toxicity issues, the search for alternative materials has come into focus. The objective of the present study was to investigate the influence of the applied solvent on the composite formation of titanate nanotubes (TNTs) with various drugs in order to improve their pharmacokinetics, such as solubility, stability, and bioavailability.

Standpoint on the priority of TNTs and CNTs as targeted drug delivery systems.

Conventional drug delivery systems have limitations according to their toxicity and poor solubility, bioavailability, stability, and pharmacokinetics (PK). Here, we highlight the importance of functionalized titanate nanotubes (TNTs) as targeted drug delivery systems. We discuss the differences in the physicochemical properties of TNTs and carbon nanotubes (CNTs) and focus on the use of functionalization to improve their characteristics.

Investigation of the Compressibility and Compactibility of Titanate Nanotube-API Composites.

The present work aims to reveal the pharma-industrial benefits of the use of hydrothermally synthesised titanate nanotube (TNT) carriers in the manufacturing of nano-sized active pharmaceutical ingredients (APIs). Based on this purpose, the compressibility and compactibility of various APIs (diltiazem hydrochloride, diclofenac sodium, atenolol and hydrochlorothiazide) and their 1:1 composites formed with TNTs were investigated in a comparative study, using a Lloyd 6000R uniaxial press instrumented with a force gauge and a linear variable differential transformer extensometer. The tablet compression was performed without the use of any excipients, thus providing the precise energetic characterisation of the materials' behaviour under pressure.

Comparison of the properties of implantable matrices prepared from degradable and non-degradable polymers for bisphosphonate delivery.

The aim of the present study was the development of directly compressed tablets for implantable delivery of risedronate sodium for osteoporosis treatment and the comparison of the mechanism and kinetics of drug release from biogradable (chitosan) and non-degradable (PVC) polymer matrices. The compositions and process parameters were optimized in accordance to a mixed 2 and 3 level full factorial design. Critical Quality Attributes (CQA), such as diametral breaking hardness, porosity and speed of drug dissolution were investigated.

Physicochemical characterisation and investigation of the bonding mechanisms of API-titanate nanotube composites as new drug carrier systems.

Titanate nanotube (TNT) has recently been explored as a new carrier material for active pharmaceutical ingredients (API). The aim of the present work was to reveal the physicochemical properties of API-TNT composites, focusing on the interactions between the TNTs and the incorporated APIs. Drugs belonging to different Biopharmaceutical Classification System (BCS) classes were loaded into TNTs: diltiazem hydrochloride (BCS I.

Preparation and physicochemical characterization of matrix pellets containing APIs with different solubility via extrusion process.

In this study, a multiparticulate matrix system was produced, containing two different active pharmaceutical ingredients (APIs): enalapril-maleate and hydrochlorothiazide. The critical control points of the process were investigated by means of factorial design. Beside the generally used microcrystalline cellulose, ethylcellulose was used as matrix former to achieve modified drug release ensured by diffusion.

Process analytical technology (PAT) approach to the formulation of thermosensitive protein-loaded pellets: Multi-point monitoring of temperature in a high-shear pelletization.

In the literature there are some publications about the effect of impeller and chopper speeds on product parameters. However, there is no information about the effect of temperature. Therefore our main aim was the investigation of elevated temperature and temperature distribution during pelletization in a high shear granulator according to process analytical technology.

Multivariate calibration of the degree of crystallinity in intact pellets by X-ray powder diffraction.

XRPD is the method of choice to determine crystalline content in an amorphous environment. While several studies describe its use on powders, little information is available on its performance on finished products. The method's use may be limited not only by the need of sample pretreatment and its validation but also by the propensity of some materials to recrystallize when exposed to heat or mechanical stress.

Effect of the surface free energy of materials on the lamination tendency of bilayer tablets.

Dosage forms with fixed dose combinations of drugs is a frequent and advantageous mode of administration, but their production involves a number of technological problems. Numerous interactions in a homogeneous vehicle may be avoided through the use of layered tablets. The mechanical properties of these dosage forms depend on numerous process parameters and material characteristics.

Evaluation of the swelling behaviour of iota-carrageenan in monolithic matrix tablets.

The swelling properties of monolithic matrix tablets containing iota-carrageenan were studied at different pH values, with measurements of the swelling force and characterization of the profile of the swelling curve. The swelling force meter was linked to a PC by an RS232 cable and the measured data were evaluated with self-developed software. The monitor displayed the swelling force vs.

Study of the compressibility of chewing gum and its applicability as an oral drug delivery system.

Medicated chewing gum tablets were prepared and evaluated as an oral drug delivery system. The morphology and surface free energy of the components were characterized, and the tablets were prepared by direct compression with an instrumented eccentric tableting machine. The compressibility, the porosity and the texture of the tablets were investigated and the dissolution of the active pharmaceutical ingredient (caffeine) from them was tested with a specially-developed method.

Matrix tablets based on a carrageenan with the modified-release of sodium riboflavin 5'-phosphate.

The focus of this work was to produce modified-release monolithic matrix tablets containing sodium riboflavin 5'-phosphate (vitamin B2) as active pharmaceutical ingredient (API). Riboflavin 5'-phosphate is absorbed from the upper gastrointestinal tract by a specific transport mechanism. The aim of this work was the development of modified-release tablets from which most or the entire API can dissolve within 5 h.

Investigation of the cytotoxic effects of titanate nanotubes on Caco-2 cells.

Titanate nanotubes can be used as drug delivery systems, but limited information is available on their interactions with intestinal cells. In this study, we investigated the cytotoxicity and cellular uptake of titanate nanotubes on Caco-2 monolayers and found that up to 5 mg/ml concentration, these nanotubes are not cytotoxic and not able to permeate through the intestinal cell layer. Transmission electron microscopic experiments showed that titanate nanotubes are not taken up by cells, only caused a high-density granulation on the surface of the endoplasmic reticulum.

Modified-release capsules containing sodium riboflavin 5'-phosphate.

Introduction: The focus of this work was to produce delayed-release capsules containing riboflavin (vitamin B2, as API) layered pellets. Riboflavin therapy is indicated in patients with a riboflavin deficiency, which usually occurs in conjunction with malabsorption, alcoholism or a protein-calorie deficiency and rarely as the sole vitamin deficiency. Riboflavin is readily absorbed from the upper gastrointestinal tract by a specific transport mechanism.

Elemental analysis of Ginkgo biloba leaf samples collected during one vegetation period.

The object of our work was the identification and quantification of inorganic elements in Ginkgo biloba L. leaves (Ginkgonis folium, Ginkgoaceae) by X-ray fluorescence analysis. The plant material was obtained from a 50-years-old female tree at the Comenius University Botanical Garden (Bratislava, Slovakia).

Development of a Raman method to follow the evolution of coating thickness of pellets.

Context: Although several methods have been investigated to measure the film thickness of tablets and its correlation with the dissolution behavior, much fewer such investigations exist for pharmaceutical pellets.

Objective: To study the possibility of measuring the film thickness and predicting the dissolution behavior of pellets produced in different fluid bed equipments with Raman spectroscopy.

Materials And Methods: Pyridoxine hydrochloride-layered pellets were produced and coated in two different Strea-1 equipments.

Preparing of pellets by extrusion/spheronization using different types of equipment and process conditions.

Introduction: The focus of this work was to produce matrix pellets made by extrusion/ spheronization using two types of equipment. The aim was to accomplish the laboratory-scale I process that has been already optimized and accepted with another type of equipment (laboratory-scale II).

Methods: A matrix pellet formulation consisting of MCC, Eudragit NE 30D and diclofenac sodium was used in the two types of equipment.

Application of physicochemical properties and process parameters in the development of a neural network model for prediction of tablet characteristics.

The importance of in silico modeling in the pharmaceutical industry is continuously increasing. The aim of the present study was the development of a neural network model for prediction of the postcompressional properties of scored tablets based on the application of existing data sets from our previous studies. Some important process parameters and physicochemical characteristics of the powder mixtures were used as training factors to achieve the best applicability in a wide range of possible compositions.

Study of the recrystallization in coated pellets - effect of coating on API crystallinity.

Coated diltiazem hydrochloride-containing pellets were prepared using the solution layering technique. Unusual thermal behavior was detected with differential scanning calorimetry (DSC) and its source was determined using thermogravimetry (TG), X-ray powder diffraction (XRPD) and hot-stage microscopy. The coated pellets contained diltiazem hydrochloride both in crystalline and amorphous form.

Effects of pharmaceutical processing on pepsin activity during the formulation of solid dosage forms.

The main aim of this study was to investigate the effects of pharmaceutical technological methods on pepsin activity during the formulation of solid dosage forms. The circumstances of direct compression and wet granulation were modeled. During direct compression, the heat and the compression force must be taken into consideration.

Effects of processing on the release profiles of matrix systems containing 5-aminosalicylic acid.

The aim of this study was to investigate the influence of different processing methods on the profiles of 5-aminosalicylic acid dissolution from controlled-release matrix systems based on Eudragit® RL and Eudragit® RS water-insoluble polymers. The pure polymers and their mixtures were studied as matrix formers using different processing methods, i.e.

Formulation study of directly compressible chewable polymers containing ascorbic acid.

The topic of this article is the compression physics of different gum bases which can be used to prepare chewing gum tablets by direct compression. Three different gum bases, Pharmagum(®) C, M and S, were tested alone and in different combinations. The preparations were compressed with a Korsch EK0 eccentric tableting machine at compression forces of 5, 7.