Zn doped CaP coatings used for controlling the degradation rate of MgCa1 alloy: In vitro anticorrosive properties, sterilization and bacteria/cell-material interactions.

The purpose of this study was to investigate the effect of Zn doped CaP coatings prepared by micro-arc oxidation method, as a possible approach to control MgCa1 alloy degradation. All the prepared coatings comprised a calcium deficient CaP phase. The control in this evaluation was performed with undoped CaP coating in SBF solution at body temperature (37 ± 0.

Adjustable bone plate: from bench to operating room.

Background/aim: We have designed an adjustable bone plate (ABP) which allows bone shortening and lengthening after fixation, which is a property not present in any of the plate systems available today. The aim of the current study was to examine the new ABP's segmental bone transfer capability for the treatment of a segmental bone defect in an animal model.

Materials And Methods: Five sheep had ABPs attached to 10 of their tibias and bone defects of 15 mm in size were created.

Silver nanowire loaded poly(ε-caprolactone) nanocomposite fibers as electroactive scaffolds for skeletal muscle regeneration.

Volumetric muscle loss (VML) due to trauma and tumor removal operations affects millions of people every year. Although skeletal muscle has a natural repair mechanism, it cannot provide self-healing above a critical level of VML. In this study, nanocomposite aligned fiber scaffolds as support materials were developed for volumetric skeletal muscle regeneration.

3D Printed Biodegradable Polyurethaneurea Elastomer Recapitulates Skeletal Muscle Structure and Function.

Effective skeletal muscle tissue engineering relies on control over the scaffold architecture for providing muscle cells with the required directionality, together with a mechanical property match with the surrounding tissue. Although recent advances in 3D printing fulfill the first requirement, the available synthetic polymers either are too rigid or show unfavorable surface and degradation profiles for the latter. In addition, natural polymers that are generally used as hydrogels lack the required mechanical stability to withstand the forces exerted during muscle contraction.

Recycled algae-based carbon materials as electroconductive 3D printed skeletal muscle tissue engineering scaffolds.

Skeletal muscle is an electrically and mechanically active tissue that contains highly oriented, densely packed myofibrils. The tissue has self-regeneration capacity upon injury, which is limited in the cases of volumetric muscle loss. Several regenerative therapies have been developed in order to enhance this capacity, as well as to structurally and mechanically support the defect site during regeneration.

Facile modification of polycaprolactone nanofibers with egg white protein.

Synthetic polymers remain to be a major choice for scaffold fabrication due to their structural stability and mechanical strength. However, the lack of functional moieties limits their application for cell-based therapies which necessitate modification and functionalization. Blending synthetic polymers with natural components is a simple and effective way to achieve the desired biological properties for a scaffold.

Novel additive manufacturing applications for communicable disease prevention and control: focus on recent COVID-19 pandemic.

COVID-19 disease caused by the SARS-CoV-2 virus has had serious adverse effects globally in 2020 which are foreseen to extend in 2021, as well. The most important of these effects was exceeding the capacity of the healthcare infrastructures, and the related inability to meet the need for various medical equipment especially within the first months of the crisis following the emergence and rapid spreading of the virus. Urgent global demand for the previously unavailable personal protective equipment, sterile disposable medical supplies as well as the active molecules including vaccines and drugs fueled the need for the coordinated efforts of the scientific community.

3D cellular alignment and biomimetic mechanical stimulation enhance human adipose-derived stem cell myogenesis.

Determination of a stem cell source with sufficient myogenic differentiation capacity that can be easily obtained in large quantities is of great importance in skeletal muscle regeneration therapies. Adipose-derived stem cells (ASCs) are readily available, can be isolated from fat tissue with high yield and possess myogenic differentiation capacity. Consequently, ASCs have high applicability in muscle regenerative therapies.

Design of a new dual mesh with an absorbable nanofiber layer as a potential implant for abdominal hernia treatment.

Dual meshes are often preferred in the treatment of umbilical and incisional hernias where the abdominal wall defect is large. These meshes are generally composed of either two nonabsorbable layers or a nonabsorbable layer combined with an absorbable one that degrades within the body upon healing of the defect. The most crucial point in the design of a dual mesh is to produce the respective layers based on the structure and requirements of the recipient site.

A novel polyurethane-based biodegradable elastomer as a promising material for skeletal muscle tissue engineering.

A key challenge in skeletal muscle tissue engineering is the choice of a proper scaffolding material as it should demonstrate elastic behavior to withstand and support the dynamic loading of the tissue microenvironment while being biodegradable and biocompatible. In this study, we tested the applicability of a novel biodegradable polyurethane (PU) elastomer chain extended with fibrinogen (Fib) to fulfill these requirements. Biodegradable polyurethane-fibrinogen (PU-Fib) elastomers were synthesized by step-wise condensation polymerization.

Myogenic Differentiation of ASCs Using Biochemical and Biophysical Induction.

Adipose-derived stem/stromal cells (ASCs) constitute a very promising source for cell therapy and tissue engineering approaches as they can be easily obtained in large quantities with comparatively minimal patient discomfort. Moreover, ASCs have multilineage differentiation capacity. Among these, differentiation capacity along the myogenic lineage is of particular interest since myogenic precursors are scarce and obtaining a large number of cells from skeletal muscle biopsies is difficult.

Infrapatellar Fat Pad-Derived Stem Cell-Based Regenerative Strategies in Orthopedic Surgery.

Infrapatellar fat pad is a densely vascularized and innervated extrasynovial tissue that fills the anterior knee compartment. It plays a role in knee biomechanics as well as constitutes a source of stem cells for regeneration after knee injury. Infrapatellar fat pad-derived stem cells (IPFP-ASCs) possess enhanced and age-independent differentiation capacity as compared to other stem cells, which makes them a very promising candidate in stem cell-based regenerative therapy.

Scaffold pore size modulates in vitro osteogenesis of human adipose-derived stem/stromal cells.

Trabecular bone has an interconnected porous structure, which influences cellular responses, biochemical transport and mechanical strength. Appropriately mimicking this structural organization in biomaterial scaffolds can facilitate more robust bone tissue regeneration and integration by providing a native microenvironment to the cells. This study examined the effect of pore size on human adipose-derived stem/stromal cell (ASC) osteogenesis within poly(ε-caprolactone) (PCL) scaffolds.

Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds.

The treatment of large craniomaxillofacial bone defects is clinically challenging due to the limited availability of transplantable autologous bone grafts and the complex geometry of the bones. The ability to regenerate new bone tissues that faithfully replicate the anatomy would revolutionize treatment options. Advances in the field of bone tissue engineering over the past few decades offer promising new treatment alternatives using biocompatible scaffold materials and autologous cells.

A biomimetic growth factor delivery strategy for enhanced regeneration of iliac crest defects.

The importance of provision of growth factors in the engineering of tissues has long been shown to control the behavior of the cells within the construct and several approaches were applied toward this end. In nature, more than one type of growth factor is known to be effective during the healing of tissue defects and their peak concentrations are not always simultaneous. One of the most recent strategies includes the delivery of a combination of growth factors with the dose and timing to mimic the natural regeneration cascade.

Tissue engineering strategies in ligament regeneration.

Ligaments are dense fibrous connective tissues that connect bones to other bones and their injuries are frequently encountered in the clinic. The current clinical approaches in ligament repair and regeneration are limited to autografts, as the gold standard, and allografts. Both of these techniques have their own drawbacks that limit the success in clinical setting; therefore, new strategies are being developed in order to be able to solve the current problems of ligament grafting.