A facile strategy for synthesizing isosorbide-based polyurethane structural adhesives and core-shell rubber.

A structural adhesive series of biomass-based polyurethane (Biomass-PU) is synthesized using polypropylene glycol (PPG2000), isosorbide-based polyol (RPO300) as polyols, isophorone diisocyanate (IPDI) as an isocyanate and 4-tert-butylphenol (BP) as a capping agent. Three different equivalent ratios of PPG2000/RPO300, 9/1 (Biomass-PU1), 7/3 (Biomass-PU2), and 1/1 (Biomass-PU3), are evaluated to determine the effect of isosorbide-based polyol content on the properties and the optimizing formulation of biomass-PU structure adhesive. The 9/1 ratio of PPG2000/RPO300 substantially leads to the improvement of impact strength by up to 35 MPa, and the PPG2000/RPO300 = 9/1 ratio exhibits better thermal properties and impact strength than those of other ratios.

Synthesis of Room Temperature Curable Polymer Binder Mixed with Polymethyl Methacrylate and Urethane Acrylate for High-Strength and Improved Transparency.

Urethane acrylate (UA) was synthesized from various di-polyols, such as poly(tetrahydrofuran) (PTMG, Mn = 1000), poly(ethylene glycol) (PEG, Mn = 1000), and poly(propylene glycol) (PPG, Mn = 1000), for use as a polymer binder for paint. Polymethyl methacrylate (PMMA) and UA were blended to form an acrylic resin with high transmittance and stress-strain curve. When PMMA was blended with UA, a network structure was formed due to physical entanglement between the two polymers, increasing the mechanical properties.

Dramatic reduction of toxicity of Poly(hexamethylene guanidine) disinfectant by charge neutralization.

The current study aimed to investigate the toxicity of positively charged polyhexamethylene guanidine (PHMG) polymer and its complexation with different anionic natural polymers such as k-carrageenan (kCG), chondroitin sulfate (CS), sodium alginate (Alg.Na), polystyrene sulfonate sodium (PSS.Na) and hydrolyzed pectin (HP).

Synthesis of a Room-Temperature Curable Acrylic-Urethane Polymer Binder for Road Markings with High Transmittance.

Triol acrylic-urethane (t-AU) was synthesized from an addition reaction using trimethylolpropane, hexamethylene diisocyanate, and 2-hydroxyethyl methacrylate. The novel acrylic-urethane polymer was applied to a high-performance binder to prepare a reliable road marking paint. Acrylic-urethane polymer binder formulations were designed to optimize the effect of t-AU on the physical properties.

Transparency- and Repellency-Enhanced Acrylic-Based Binder for Stimuli-Responsive Road Paint Safety Improvement Technology.

In the current study, an acrylic polymer binder applicable to road signs was successfully developed by mixing various acrylic, acrylate-type, and photoinitiator-based monomer species at different acrylate series/silicone acrylate ratios. An amorphous acrylic monomer was used, and the distance between the polymers was increased to improve transparency. The binder was designed with the purpose of reducing the yellowing phenomenon due to resonance by excluding the aromatic ring structure, which is the main cause of yellowing.

Tacky-Free Polyurethanes Pressure-Sensitive Adhesives by Molecular-Weight and HDI Trimer Design.

Polyurethane pressure-sensitive adhesives (PU-PSAs) with satisfactory tack, cohesion, and removability were newly developed through the synthetic process by reacting methylene diisocyanate, poly(ethylene glycol) (PEG), and a 1,4-butanediol chain extender based on the different HDI/HDI trimer ratios. The sticking properties of PU-PSAs depended on both the HDI/HDI trimer ratio and crosslinking-agent composition in the formulation. The molecular weight (MW) dependence of adhesion in PU-PSA was observed in the range of 1000 < Mn < 3000, suggesting that the increase in MW limits the pressure-sensitive adhesion of these samples.

Highly Flexible and Photo-Activating Acryl-Polyurethane for 3D Steric Architectures.

An acryl-functionalized polyurethane (PU) series was successfully synthesized using poly(tetramethylene ether) glycol-methylene diphenyl diisocyanate (PTMG-MDI) oligomer based on urethane methacrylates to control the flexibility of photo-cured 3D printing architectures. The mass ratio of acryl-urethane prepolymer: 1,4-butanediol (BD) chain-extender: diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO) photoinitiator was 10:0.25:1.

Synthesis and Characteristics of Eco-Friendly 3D Printing Material Based on Waterborne Polyurethane.

Photo-cured 3D architectures are successfully printed using the designed waterborne polyurethane-acrylate (WPUA) formulation. A WPUA series is synthesized in the presence of polycaprolactone diol (PCL) and 4,4'-methylene dicyclohexyl diisocyanate (HMDI) as the soft segment part, dimethylolbutanoic acid (DMBA) as the emulsifier, and triethylamine (TEA) as the neutralizer, as a function of prepolymer molecular weight. The compatibility of WPUA and the photo-activating acryl monomer is as a key factor to guarantee the high resolution of 3D digital light processing (DLP) printing.

A facile template-free strategy for synthesizing hydroxymethyl-poly(3,4-ethylenedioxythiophene) nanospheres.

Hydroxymethyl-poly(3,4-ethylenedioxythiophene)(PEDOT-OH) nanospheres self-assembled using physical blowing method, which continually used a syringe, were successfully formed through aqueous solution polymerization under the oxidative initiators. The effect of blowing on the morphological properties of PEDOT-OH was precisely evaluated based on the different amount of initiator. The concentration of ammonium persulfate might be a driving force in the self-assembly process to create the PEDOT-OH nanospheres.

Polymer Nanocomposite Electrode Consisting of Polyaniline and Modified Multi-Walled Carbon Nanotube for Rechargeable Battery.

In this study, PANI nanocomposite with modified multi-walled carbon nanotube (mMWCNT) was prepared. Herein MWCNT was modified by Friedel-Crafts acylation reaction. The dc conductivity of PANI nanocomposite according to the content of mMWCNT was measured by four-point probe.

Optical and electrochemical detection of saccharides with poly(aniline-co-3-aminobenzeneboronic acid) prepared from enzymatic polymerization.

Boronic acid-based sensors for saccharides have been developed via biocatalysis. The self-doped copolymer of poly(aniline-co-3-aminobenzeneboronic acid) [poly(aniline-co-AB)], with various mole ratios of two components, was synthesized by oxidative enzymatic polymerization using a natural biocatalyst such as horseradish peroxidase together with an anionic polyelectrolyte template (sulfonated polystyrene) under mild conditions (pH 4.5).