Publications by authors named "Pikaar I"

Nitrogen is the most crucial element in the production of nutritious feeds and foods. The production of reactive nitrogen by means of fossil fuel has thus far been able to guarantee the protein supply for the world population. Yet, the production and massive use of fertilizer nitrogen constitute a major threat in terms of environmental health and sustainability.

View Article and Find Full Text PDF

Although iron salts such as iron(III) chloride (FeCl) have widespread application in wastewater treatment, safety concerns limit their use, due to the corrosive nature of concentrated solutions. This study demonstrates that local, electrochemical generation of iron is a viable alternative to the use of iron salts. Three laboratory systems with anaerobic membrane processes were set up to treat real wastewater; two systems used the production of either in-situ or ex-situ electrochemical iron (as Fe and Fe(Fe)O, respectively), while the other system served as a control.

View Article and Find Full Text PDF

To meet requirements in air quality monitoring, sensors are required that can measure the concentration of gaseous pollutants at concentrations down to the ppb and ppt levels, while at the same time they exhibiting high sensitivity, selectivity, and short response/recovery times. Among the different sensor types, those employing metal oxide semiconductors (MOSs) offer great promises as they can be manufactured in easy/inexpensive ways, and designed to measure the concentration of  a wide range of target gases. MOS sensors rely on the adsorption of target gas molecules on the surface of the sensing material and the consequent capturing of electrons from the conduction band that in turn affects their conductivity.

View Article and Find Full Text PDF

Alternative protein sources such as microbial protein (MP) are currently considered to alleviate the burden that food production exerts on the environment. Even though MP production is highly efficient in land and nutrient utilization, their carbon footprint should be improved. Here we propose the use of CCU as a driver for heterotrophic MP production.

View Article and Find Full Text PDF

Ammonium sorption and recovery processes typically take place in conventional packed columns, with a configuration that enables maximum sorption by the sorbents. However, batch or semi-continuous operations in packed columns have associated issues such as scaling and frequent backwashing requirements, which are economically prohibitive. As an alternative, ammonium sorption could occur in well-mixed continuously stirred tanks, which would allow for the ammonium sorption process to be retrofitted in existing wastewater treatment plants, provided that efficient sorbent separation can be achieved.

View Article and Find Full Text PDF
Article Synopsis
  • * New technologies and social solutions can have mixed effects, benefiting some SDGs while negatively impacting others, so they need to be integrated into broader systemic changes for better outcomes.
  • * Managing trade-offs, especially regarding social issues like inequality and justice, is crucial for true sustainability, which requires planned pathways, monitoring of key indicators, and clear local science targets.
View Article and Find Full Text PDF

The impact of primary sedimentation on the multiple use of iron in an urban wastewater system was investigated. Our previous work showed that in-sewer iron-rich drinking water sludge (DWS) dosing exhibited multiple benefits in the downstream processes. However, the system studied did not include a primary settler.

View Article and Find Full Text PDF

Recent studies demonstrated the practical potential of multiple beneficial reuse of ferric-rich drinking water sludge (ferric DWS) for sulfide and phosphate removal in wastewater applications. In practice, ferric DWS is often stored on-site for periods ranging from days to several weeks (or even months), which may affect its reuse potential through changes in iron speciation and morphology. In this study, we investigated for the first time the impact of ferric DWS 'aging' time on the iron speciation and morphology and its subsequent impact on its reactivity and overall sulfide and phosphate removal capacity.

View Article and Find Full Text PDF

Rapid and continuous ammonium adsorption from mainstream coupled with side-stream ammonium recovery and adsorbent regeneration could enable ammonium recovery from domestic wastewater. This study describes the use of tailored poly(acrylic acid)-based (NaPAA) hydrogels as effective sorbents for ammonium removal from domestic wastewater. Modified NaPAA hydrogels having 60% ionization and 4.

View Article and Find Full Text PDF

The capacity of three inocula (sewer biofilm, mangrove and estuary sediment) to utilise typical fermentation products of municipal solid waste for biological sulfate reduction was investigated. Each inoculum was used in two reactors, one fed a mixture of volatile fatty acids and another fed glucose to provide a suite of fermentation products via naturally occurring fermentation. Following 228 days of reactor operation, reactors inoculated with mangrove and estuary sediments exhibited higher sulfate reducing efficiencies (80-88%) compared to the biofilm-inoculated reactors (32-49%).

View Article and Find Full Text PDF

Anaerobic digesters produce biogas, a mixture of predominantly CH and CO , which is typically incinerated to recover electrical and/or thermal energy. In a context of circular economy, the CH and CO could be used as chemical feedstock in combination with ammonium from the digestate. Their combination into protein-rich bacterial, used as animal feed additive, could contribute to the ever growing global demand for nutritive protein sources and improve the overall nitrogen efficiency of the current agro- feed/food chain.

View Article and Find Full Text PDF

Sustainable development is driving a rapid focus shift in the wastewater and organic waste treatment sectors, from a "removal and disposal" approach towards the recovery and reuse of water, energy and materials (e.g. carbon or nutrients).

View Article and Find Full Text PDF

Iron-based coagulants are dosed in enormous amounts and play an essential role in various segments of our urban water infrastructure. In order for the water industry to become circular, a closed-loop management strategy for iron needs to be developed. In this study, we have demonstrated for the first time that in-sewer dosed iron, either in the form of FeCl or ferric-based drinking water sludge (Fe-DWS) as a means to combat sewer corrosion and odour, can be recovered in the form of vivianite in digested sludge in down-stream wastewater treatment plants.

View Article and Find Full Text PDF

The use of coagulants and flocculants in the water and wastewater industry is predicted to increase further in the coming years. Alum is the most widely used coagulant, however, the use of ferric chloride (FeCl) is gaining popularity. Drinking water production that uses FeCl as coagulant produces waste sludge rich in iron.

View Article and Find Full Text PDF

The carrying capacity of the planet is being exceeded, and there is an urgent need to bring forward revolutionary approaches, particularly in terms of energy supply, carbon emissions and nitrogen inputs into the biosphere. Hydrogen gas, generated by means of renewable energy through water electrolysis, can be a platform molecule to drive the future bioeconomy and electrification in the 21 century. The potential to use hydrogen gas in microbial metabolic processes is highly versatile, and this opens a broad range of opportunities for novel biotechnological developments and applications.

View Article and Find Full Text PDF

Hydrogen sulfide induced corrosion of concrete sewer pipes is a major issue for wastewater utilities globally. One of the most commonly used methods to combat hydrogen sulfide is the addition of ferric chloride. While a reliable and effective method, ferric chloride is acidic causing OH&S concerns as well as alkalinity consumption in sewage.

View Article and Find Full Text PDF

Throughout the 20th century, the prevailing approach toward nitrogen management in municipal wastewater treatment was to remove ammonium by transforming it into dinitrogen (N) using biological processes such as conventional activated sludge. While this has been a very successful strategy for safeguarding human health and protecting aquatic ecosystems, the conversion of ammonium into its elemental form is incompatible with the developing circular economy of the 21st century. Equally important, the activated sludge process and other emerging ammonium removal pathways have several environmental and technological limitations.

View Article and Find Full Text PDF

Iron and aluminium based coagulants are used in enormous amounts and play an essential role in urban water management globally. They are dosed at drinking water production facilities for the removal of natural organic matter. Iron salts are also dosed to sewers for corrosion and odour control, and at wastewater treatment plants (WWTPs) for phosphate removal from wastewater and hydrogen sulfide removal from biogas.

View Article and Find Full Text PDF

To adhere to the Paris Agreement of 2015, we need to store several Gigatonnes (Gt) of carbon annually. In the last years, a variety of technologies for carbon capture and storage (CCS) and carbon capture and usage (CCU) have been demonstrated. While conventional CCS and CCU are techno-economically feasible, their climate change mitigation potentials are limited, due to limited amount of CO that can be captured.

View Article and Find Full Text PDF

Electrochemical sulfide removal can be attractive as a zero-chemical-input approach for treatment of waste streams such as spent caustics coupled to caustic recovery. A key concern is possible decline in catalytic activity, due to passivation from deposited elemental sulfur (S) on the anode surface and stability limitation, due to sulfide oxidation under highly alkaline conditions. In this study, six commercially available electrode materials (Ir Mixed Metal Oxide (MMO), Ru MMO, Pt/IrOx, Pt, PbOx and TiO/IrTaO coated titanium-based electrodes) were tested to investigate the impact of the electrocatalyst on the process efficiency in terms of sulfide removal and final product of sulfide oxidation, as well as to determine the stability of the electrocatalyst under high sulfide concentrations (50 mM NaS) and high alkalinity (pH > 12).

View Article and Find Full Text PDF

The effect of iron-dosing in the sewer system, on wastewater treatment processes, was investigated using laboratory-scale wastewater systems comprising sewers, wastewater treatment reactors, sludge thickeners, and anaerobic sludge digesters. Two systems, fed with real domestic wastewater, were operated for over a year. The experimental system received ferric chloride (FeCl) dosing at 10 mgFe L in the sewer reactor whereas the control system received none.

View Article and Find Full Text PDF

One of the main challenges for the 21st century is to balance the increasing demand for high-quality proteins while mitigating environmental impacts. In particular, cropland-based production of protein-rich animal feed for livestock rearing results in large-scale agricultural land-expansion, nitrogen pollution, and greenhouse gas emissions. Here we propose and analyze the long-term potential of alternative animal feed supply routes based on industrial production of microbial proteins (MP).

View Article and Find Full Text PDF