Numerical simulations of high viscosity DNAPL recovery in highly permeable porous media under isothermal and non-isothermal conditions.

We developed a decimetric size model based on coupling generalized Darcy's law and heat-transfer equations to model viscous dense non-aqueous phase liquid (DNAPL) pumping through highly permeable porous media under non-isothermal conditions. The presence of fingering and non-wetting phase ganglia was modeled through an unsteady capillary diffusion coefficient and an arbitrary heterogeneous permeability field. The model was validated using existing experimental data of a simple case, an oil injection in a 2D tank packed with glass beads.

Experimental study of thermally enhanced recovery of high-viscosity DNAPL in saturated porous media under non-isothermal conditions.

Thermal enhancement is known to be an efficient way to decrease the residual saturation of some common dense non-aqueous phase liquids (DNAPLs) after pumping. However, the effect of transient heat transfer during the recovery of a high-viscosity contaminant, such as coal tar, in highly permeable porous media is still unknown. A 2D tank experimental setup allowing monitoring of temperature and saturation fields during DNAPL pumping has been developed.

Assessment of flushing methods for the removal of heavy chlorinated compounds DNAPL in an alluvial aquifer.

Immiscible mobilization and foam flushing were assessed as low surfactant consuming technologies, for the enhanced recovery of dense non-aqueous phase liquid (DNAPL) residual at a site contaminated by heavy chlorinated compounds. Preliminary experiments in well-controlled conditions demonstrated the phenomena involved in these remediation technologies and their limitations. Furthermore, we characterized the technologies according to by their surfactant consumption (per kg of DNAPL recovered) and the final DNAPL saturation reached.